Very helpful, thank you. Now I've got to remove the panel to find out why I've got water coming through that vent.
@user-jb2kb9nm9c8 ай бұрын
Great video, very helpful. Thanks
@cmaxinuk6 жыл бұрын
Helped me to stop a leak in my Astra H MK5 - Thank you for sharing
@DTSmileLove6 жыл бұрын
With pleasure :)
@jannisweltАй бұрын
Nice video, thank you! 😊
@06stiguy636 жыл бұрын
Wanted to remove the scuttle panel on my 09 astra gtc so this was helpfull. Thanks!
@DTSmileLove6 жыл бұрын
I'm glad I could help:)
@06stiguy636 жыл бұрын
Btw you unclipped the scuttle panel very easily in the video but mine was clipped in very tightly near the glass with 5 white plastic clips so for anyone trying this try to look underneath the panel from the engine compartment side up to the windshield side to see and push up the clips with your hands to unclip the panel. If not you risk breaking attachment points or clips .. like i did. Wish i could add pictures to show what i mean. Also if your wiper arms are really stuck do not keep smashing the bolt (to avoid damage to wiper arm linkage) but get a wiper arm pulling tool. If anything at least screw the nut back on the bolt until it's flush with the head before tapping it with a hammer to not damage the threads.
@DTSmileLove6 жыл бұрын
With pleasure:)
@DTSmileLove6 жыл бұрын
Thanks
@SASlair5 жыл бұрын
@@06stiguy63 I had the same issue. I needed to remove the scuttle panel to get access to the wiper motor. I have my wipers stuck in the upright position. I ended up breaking one of the white end clips so I gave up on removing it out of fear of breaking the rest of the clips. Now, the scuttle panel 's rubber portion does not lay flush with the windshield and I still have the wiper arms in the upright position. What did you do to seat the panel back against the glass after the clips broke?
@paulr32373 жыл бұрын
My little varmints chew at my firewall insulation. Thanks for the video.
@KeltjuhMusic4 жыл бұрын
Thanks! Helped me alot
@DTSmileLove4 жыл бұрын
Glad to hear!
@Vimokshadaka5 жыл бұрын
Very helpful, many thanks 🙏
@cockneyzombie5 жыл бұрын
Good video thanks man.
@geo08595 жыл бұрын
Usefull video ; thanxs
@josefranciscoesquertalaman38276 жыл бұрын
Me gustó, lo intentaré haber si logro despegarlo por el oxido. Necesito darle Servicio. Es decir mantenimiento.
@maariuspola38247 жыл бұрын
good job dude.
@DTSmileLove7 жыл бұрын
Thank's:)
@tomaskiss23286 жыл бұрын
Nice job man. Where are you from?
@DTSmileLove6 жыл бұрын
Thanks:) From Slovenia.
@painkiller374 жыл бұрын
thanks
@DTSmileLove4 жыл бұрын
With my pleasure:)
@toja45912 жыл бұрын
Great. It could be better if you put this metal mesh across whole plastic mesh in case "the animal" return.
@pramodapte18766 жыл бұрын
Good vdo
@DTSmileLove5 жыл бұрын
😊
@manitee6 жыл бұрын
Get on with it!
@mare43233 жыл бұрын
U can put in there some small filter, like from pantyhose, (steal from your girlfriend xD) or even better put active carbon filter, that's little expensive, but active carbon filter neutralise all smells from air, all kind of smell coming from outside, for exemple u driving behind some diesel truck and all bad smell from diesel coming inside, with carbon filter u don't have that problem :D that filter also clean air from bacteries, viruses etc. thats healty, also that act like additional filter, and in that way polen filter can last much longer :) U can find that carbon filters in old kitchen ventilation things, i don't know how that called in english, i think it's KITCHEN HOOD, u can recognize that filter easly, there are small charcoal balls.
@TheRikijekpejnourt3 жыл бұрын
to more bit neka Wurthova gedora, you see :)))
@bmwsincekid4 жыл бұрын
I couldn’t remove it no matter how hard i Hammered it,,
@DTSmileLove4 жыл бұрын
It was also very hard in my case.
@user-rt8pj8ck5b Жыл бұрын
😂 у меня тоже мыши там гнездо сделали ,это их любимое место