No video

How to Remove Fuel Injectors Saab 9-3 | B207 Petrol engine

  Рет қаралды 20,674

Cyclone Cyd

Cyclone Cyd

Күн бұрын

Пікірлер: 57
@CycloneCyd
@CycloneCyd 2 жыл бұрын
👉 How to clean fuel injectors yourself: kzfaq.info/get/bejne/bth4oLFjpqnDnZ8.html
@naiche.
@naiche. 2 жыл бұрын
Cyd, thanks for all your hard work with the Saab videos. I know any time I search KZfaq for DIY 9-3 content, your channel is always the first source I check!
@CycloneCyd
@CycloneCyd 2 жыл бұрын
I appreciate that, I really do. After being thrown under the covid bus by JLR, ad revenue and coffees are how I make a living now. So, it's truly gratifying to know my videos are genuinely helping people.
@alexandredionisio9280
@alexandredionisio9280 2 жыл бұрын
@rails Indeed.
@richardhayden6785
@richardhayden6785 11 ай бұрын
What a helpful video! Straight to the point and well edited to remove all the stuff we don't need to see. My 2006 Saab convertible now runs really smoothly with no more ECU warnings after you showed me how to unplug those big ECU connectors so I could douse them in contact cleaner. And in proper English too 😀 Thanks!
@sejn2587
@sejn2587 2 жыл бұрын
Amazing video. We lost our local saab expert in Ireland a few weeks back and your videos give me confidence to start doing this myself. A true delight. Ps you seem like a gentleman, I could listen to you chat next to a fire and a pint in the hand!
@CycloneCyd
@CycloneCyd 2 жыл бұрын
You can do it! For some reason your comment remonded me of Owd Betts (www.google.co.uk/maps/place/Owd+Betts/@53.6387658,-2.2637502,17z/data=!3m1!5s0x487bbcbb451f832f:0xcad821dd841f164a!4m5!3m4!1s0x487bbb8c083d2573:0x65432a3c842e29f3!8m2!3d53.6406295!4d-2.2590939?hl=en-GB) it's 35 years since I've been there!
@Birlius
@Birlius 5 ай бұрын
Legend of a man. Just completed PCV replacement, injector cleaning and injector seal rebuild. Went butter smooth due to all of it being superbly covered and explained by Cyclone Cyd. Thank you!
@adamhamilton8242
@adamhamilton8242 2 жыл бұрын
Excellent explanation, thanks! Was looking all over KZfaq for a video like this 😂👍🏼
@CycloneCyd
@CycloneCyd 2 жыл бұрын
I think you posted on a FB forum about that.
@fredrikalmqvist6700
@fredrikalmqvist6700 2 жыл бұрын
Much easier than others. Thanks Cyd, for encouragement to fix my 2008 9-3 BioPower myself 👍
@CycloneCyd
@CycloneCyd 2 жыл бұрын
I appreciate that, I really do. After being thrown under the covid bus by JLR, ad revenue and coffees are how I make a living now. So, it's truly gratifying to know my videos are genuinely helping people.
@perezzperez
@perezzperez 2 жыл бұрын
Great timing! I might not have the space to work on my own car here soon but the videos can still be helpful! Thanks Cyd def want to see the intake manifold come off too
@un-_-known688
@un-_-known688 2 жыл бұрын
Nice too see your keeping Saab going,I do miss mine it drove lovely.
@CycloneCyd
@CycloneCyd 2 жыл бұрын
That's the plan! Spending big money on maintenance this year.
@robertlundholm8156
@robertlundholm8156 2 жыл бұрын
Im also using libre on my arm for my type. 1 diabetes. I also drive a saab 2.0T 😅 great videos! Cheers from 🇸🇪
@CycloneCyd
@CycloneCyd 2 жыл бұрын
Yeah, the Libre 2 is great. We can get them on the NHS now.
@robertlundholm8156
@robertlundholm8156 2 жыл бұрын
@@CycloneCyd thats great! 👍 Getting the libre was a total game changer for me.
@GodfatherOfSweden
@GodfatherOfSweden 2 жыл бұрын
Thank you cyd! Very helpful!
@CycloneCyd
@CycloneCyd 2 жыл бұрын
Glad to hear!
@rosstiks
@rosstiks 4 ай бұрын
thanks for the video, very useful! 🇺🇦
@uselessproductions2364
@uselessproductions2364 Жыл бұрын
Just did a cold, dry compression test on each of the cylinders in my b207r. The numbers in PSI: 80, 180, 120, 205. I believe I have a severe issue. Just replaces the engine chains, and I reckon I'm looking for an even higher price. Doing this job seems no joke.
@CycloneCyd
@CycloneCyd Жыл бұрын
That's not too good, but neither is it that bad. Mine is down to 40psi on 2 cylinders and 70-80 on the other two. Starts real rough on these -5C mornings.
@philhode5104
@philhode5104 2 жыл бұрын
Thanks pal,I got 1 of those magnetic trays from ebay, keeps all the bits in while working on that part
@CycloneCyd
@CycloneCyd 2 жыл бұрын
You're welcome Phil.
@tharakadamsarademattanpiti4012
@tharakadamsarademattanpiti4012 Ай бұрын
nice video
@samcheung6116
@samcheung6116 2 жыл бұрын
Very nice and detailed explanation job. I've watched your cabin fan and windscreen washer videos and fixed mine. Just wondered you done any aircon jobs on a SAAB 93 . I've replaced the drier and condenser 4 years ago by a local garage. It worked 3 years perfect cooling as you've turned it on. It worked before last years MOT, but failed immediately afterwards. I did question it with the MOT garage and they just said it failed and shouldn't be caused by the MOT tests! I've checked all the pipe works visually, but couldn't find any obvious reasons . Any ideas to check it without specialist equipment . I've checked the magnetic pump pulley by disconnected the wire to it and saw the pump pulley disengaged !
@CycloneCyd
@CycloneCyd 2 жыл бұрын
Check the valves on the hi and lo side. One of mine came loose and I lost the gas. Tightened it back up (same as a tyre valve), regassed and fine since. Also check the condensor, it may have been holed by a stone.
@damnwizzz
@damnwizzz Жыл бұрын
What if I only need to change the fuel regulator? It’s already exposed, so do I just remove the pin and just pull it out, then swap? Or is their more too it ?
@knapptlejonhuvad8248
@knapptlejonhuvad8248 3 ай бұрын
Love this video. But i got a question: my engine have kinda high vibration, and Ive got P0300 going rly bad when i start but 15-20sec its calm down but the vibration is kinda high. Have changed sparkplugs, hats and alot, please any tips? *Same engine as you*
@HisnameisRich
@HisnameisRich 2 жыл бұрын
Really useful video. I am upgrading my injectors to 630cc Bosch Dekas and there are really very few videos about. You are the go to for this kind of stuff for me even though my 2.0 aero is heavily modded! would a light silicone lubricant work for the injector o rings as well?
@CycloneCyd
@CycloneCyd 2 жыл бұрын
Yeah, a bit of spray silicone lube would be fine (even a drop of WD would do!) It's just so the o-ring slides in easily and doesn't "drag" which might damage it. I've got a set of Dekas too, but not fitted. Not sure I'll ever need them so I may sell them. Did you find a rebuild kit for them?
@mannymachado5797
@mannymachado5797 Жыл бұрын
Brilliant bit of work Cyd. You made it look effortless. Can you tell me where I can get a set of four injectors for my 2008 Saab 9.3 2.0 T, and roughly the cost?
@CycloneCyd
@CycloneCyd Жыл бұрын
Try either Neo brothers or Ron facebook.com/ron.doodle.52
@alexandredionisio9280
@alexandredionisio9280 2 жыл бұрын
Ahh yes... I already got a kit with o-rings and such ready to be used, and I don't have the ECU in that place anymore. As for the air intake manifold, last year I did the PCV change, it was totally shot. The instructions on Saab WIS were clear enough although not very efficient like you did. Also... does a counter thread drill bit and a magnet inside the 4th cylinder increase my horse power? 😆🤣 Long story short... dumb mistake after a compression test which was between 13-13,5bar. All this because the last mechanic, when I had him do a full "chains and guide" job, gave me back my precious with a rough engine mostly when idling, and I was trying to trouble shoot the problem myself. The "new" mechanic looks competent and I'll have him also clean the valves and pistons, as I noticed that they were so dirty that I could almost plant potatoes on top of them. Btw, as I've been doing for all O-rings and seals I change, I'll get Viton copies later on (this time).
@CycloneCyd
@CycloneCyd 2 жыл бұрын
Are your injectors Denso like mine? If yes, where did you get the service kit? I'm looking for one.
@alexandredionisio9280
@alexandredionisio9280 2 жыл бұрын
Update: this mechanic will fine tune the engine, give it a clean and he also told me about the turbo which has a bit of axial play, so its going to get its first service since its creation 12-2003.
@alexandredionisio9280
@alexandredionisio9280 2 жыл бұрын
@@CycloneCyd I was going to ask you if you got the kit, but it seams that my reply disappeared. So... it's the MAHLE GS33528
@kalebortega7857
@kalebortega7857 Жыл бұрын
i've recently bought a 04 saab 93 2.0t. i hasn't run in 8yrs. The key turns but doesn't do anything when you go to start the car. Dash comes on and abs light on. i jumped starter and can get car to run off of starter fluid. but i am not getting injector pulse. please help !!
@goro70
@goro70 2 жыл бұрын
Thank you so much for the video sir. Where can one buy fuel injector rebuild kit?
@CycloneCyd
@CycloneCyd 2 жыл бұрын
sorry I didn't see this sooner. www.buymeacoffee.com/CycloneCyd/e/79386
@samiaaa2040
@samiaaa2040 6 ай бұрын
💐
@vim1471
@vim1471 Жыл бұрын
Am looking to get a Saab 93 2.0T convertible next year to do a Euro trip. On some youtube videos about Saabs I've heard that the location of where the ECU is located on the petrol Saabs, it can cause the ECU to overheat. Driving around Euro with outside temps reaching upto 35c-40c, do you think the ECU might cause problems ?
@ftby59mikeD
@ftby59mikeD 2 жыл бұрын
Cyd, won't there still be residual pressure in the fuel system? Would you need to bleed it off before starting this procedure? Also, is there a specific reason for making sure ignition is not only off but key is out?...is it to prevent damage to ignition or prevent bodily injury? Thx for this excellent step by step 👍
@bluedogtransportwa
@bluedogtransportwa 2 жыл бұрын
car will lose its shit when you disconnect the ECU
@CycloneCyd
@CycloneCyd 2 жыл бұрын
The fuel pump might run when you have the key in. I show releasing fuel pressure from the line not far from the beginning
@brodie_Sudden
@brodie_Sudden 11 ай бұрын
Soo are there specific fuel injectors needed for a Saab 9:3 turbo? Or are most fuel injectors universal?
@eddolateralusio
@eddolateralusio 2 ай бұрын
Hi, Bought your o-ring kit for a Saab B207 over a month ago. When will it be shipped? Cant find your contact information hence why I text you here
@eddolateralusio
@eddolateralusio Ай бұрын
Thanks! Everything installed, but the small microfilters were a pain to remove. The filter tool just didn't bite into the metal part of the filter. Had to drive in a slightly larger wood screw and the hammer it out.
@lutfialagoz762
@lutfialagoz762 Жыл бұрын
İyigünler lütfen bu videoya Türkçe altyazı özelliği eklermisiniz teşekkürler 👍😎👍
@ZakuZak
@ZakuZak Жыл бұрын
Hello, Why do you have a battery connected ?? I will replace the injectors soon, and I need now.
@CycloneCyd
@CycloneCyd Жыл бұрын
Do you mean why not disconnect the main battery? There is no need, but do so if you feel more comfortable doing so.
@ZakuZak
@ZakuZak Жыл бұрын
@@CycloneCyd OK. thx you.. soon I started change fuel injectors.. 👌👍
@BlakeJay
@BlakeJay Жыл бұрын
Is there an O-ring where the fuel supply lines meet the fuel rail? Mine does not appear to have any, it is just metal on metal.
@BlakeJay
@BlakeJay Жыл бұрын
Ohh never mind, they are hiding under the metal at the top of the fuel rail connection. One is black one is green. It appears to be part of the fuel rail so not replaceable.
@nathanielramirez8997
@nathanielramirez8997 2 жыл бұрын
Are upgrades useful at all with just a stage 1 tune? Any good recommendations?
@CycloneCyd
@CycloneCyd 2 жыл бұрын
On a 9-3, get rid of the snorkel to the front of the car so the airbox breathes in from the wheelarch. Move the IC to the front. otherwise just keep it clean and in tip top.
SAAB 9-3: ТРАГЕДИЯ мирового масштаба!
42:31
Sumy Racing Team
Рет қаралды 203 М.
Saab 9-3 Vacuum Lines Replacement on B207 Engine
8:24
Cyclone Cyd
Рет қаралды 18 М.
Running With Bigger And Bigger Feastables
00:17
MrBeast
Рет қаралды 151 МЛН
Kids' Guide to Fire Safety: Essential Lessons #shorts
00:34
Fabiosa Animated
Рет қаралды 16 МЛН
Yum 😋 cotton candy 🍭
00:18
Nadir Show
Рет қаралды 7 МЛН
👨‍🔧📐
00:43
Kan Andrey
Рет қаралды 11 МЛН
How To Clean Your Fuel Injectors - No Expensive Tools Needed
6:54
Ratchets And Wrenches
Рет қаралды 3,5 МЛН
Saab 9-3 Fuel Pressure Regulator Replacement & Testing
7:10
Cyclone Cyd
Рет қаралды 13 М.
Replace Your Bad Fuel Injectors! | 2006 Saab 9-3 2.0T
13:27
Sub-Zero Euro
Рет қаралды 12 М.
9 Symptoms of Bad fuel Injector; How to Diagnose and Clean?
9:30
haile auto garage
Рет қаралды 461 М.
How I Fix a Saab 93 ECM
9:54
Nick's Electronic Repair
Рет қаралды 1,6 М.
How to Save Your Saab 9-3's ECU! (T8 ECU Spacer Kit Install)
13:58
Auto Autopsy
Рет қаралды 52 М.
2003+ Saab 9-3 2.0T Vacuum Pump Rebuild
10:35
Auto Autopsy
Рет қаралды 30 М.
Running With Bigger And Bigger Feastables
00:17
MrBeast
Рет қаралды 151 МЛН