Sorry to be so offtopic but does any of you know a way to log back into an instagram account?? I was stupid forgot the password. I appreciate any assistance you can give me

@Sage Seth Instablaster ;)

Lol

LMAO!!!

ahh no, mine does have prob a thousand@@sw5700

​@sw5700 10 years ago my car got hit by hail and he is not exaggerating and yesterday I got hit again and now it's more like 10k hits, broke my windows and my car is a wreck 😢

Lmfao

Hey how much the whole set up costs.

I think it was a couple hundred dollars. I got the slide hammer and the dent puller pictured. If your doing lots of dents you need a lot of glue tabs, but they are reusable to a certain extent. I bought mine off EBay. This is cheap compared to the PDR rods for pushing dents out, but glue pulling may not work for cars with repaints or older lacquer paint. You might pull the paint off before the metal gives. I really like the puller pictured I'd like to get one for the welded studs as well. I haven't played around to much with glue pulling, but no glue I've used so far works good on bare metal. I think if I had a lot of time I'd rather epoxy something like a roofing nail to the dent to be pulled rather than using a stud gun that is going to burn off the coating on the back of the metal. You'd need to be careful grinding it off that you don't create to much heat and burn it anyway. If you can back seal the repair it isn't really an issue ,destroying the inner coating that is. If you under pull the dent do it again, or step up the tab size. Make sure the surface was free of grease or wax in the first place. I've found your most likely going to over pull the dent, so your going to need the tools to tap the over pull back in.

BoogieDownProduction That color looks pretty forgiving. The car is pretty new, so might not have repair paint work and sound paint on it. The thing with glue pulling is you must be prepared to do some painting if it fails. I just did a truck that pulled the clear off the top edges, but just about pulled the dent to no body filler. Long creases are hard to make right. If the dent is to deep or sharp it won't come out well either. That car looked like a lot would be easy, but there are some trouble spots. Most glue pulls I do are too much and then I work at tapping them back. Sometimes they just wont pull out all the way. Will any repair be perfect? No and that is painted or not. You'd be shocked at how well this works with the right tabs and glue, and of course a learning curve.

Robert Presti Jr Thank you for the fantastic explanation. Thinking about it if the cost is right, I could slowly fix it up a dent or two at a time. Any panels I find for cheap I could replace just worried about rear quarter panels and the roof. If I go further is it ok if I ask you some questions?

BoogieDownProduction Not a problem, but as I said I'm fairly new to glue pulling as well, however not bodywork.

Rony Ak. Sindang فيحكككل

Sure, if one ding is what you have. I have at least a dozen on my hood alone!

There sure is! Scam artists everywhere.

lol, if you pause near 2:33 / 2:34 you see the dent brushed away even better :D

Fiob

You sure it isn't the liquid drying?

slowed down it did look faked

They do it when they mark the dents to fix so they can easily find them. Not really for the video.

Brooooo tell me about some dumb ass skank just dinged my back door on my 2016 wrx

2016 370z, have a couple of door dings. I was shamed till saw your responses guys.

NEVER use on roof rails! Use a T

Alcohol based spray does the job

🤣

No, just buy a new car.

Photoshop..

Perhaps it's from the liquid he sprayed on it, after removing the glue

The rag is the dent remover...the rest are toys to play with...

Gonna get me one of those rags for sure. Maybe a spare one too.

@Jon Doe I had the same experience using this device. Mine is a three (3) footer.

On something that small probably not.

You ain't no Brad Pitt yourself! You got a face to turn milk sour. A bit like fire damaged Lego!

And you were so ugly the doctor slapped your mother instead!. I could trade insults with you forever,God knows you make it so easy but not really a fair fight.you got nothing else to do? Maybe coax your IQ into double figures or iron your face?.

Is it true your dog licks its arse to get the taste of kissing you out of its mouth?

Yikes.....No it is not true. I do not have a dawg.

lol

No

TRusty394 yes

hot glue gun

Its your brand d new car still brand new ???

No, it's illegal.

Be the rebel.

thank you

Alcohol based spray

he definitely cut the camera, you need to wait 3-5 minutes for the glue to dry, this kit is a joke.

david serna you need to use a 91% rubbing alcohol to remove the glue

amazon

Ebay

Alcohol

Its just an isopropyl alcohol

Any were from 100 to 400 depending on were you go and who you now,and what you idear of tiny is, sometimes can be tricky around factory body crease if its on the line, if your handy just get some bondo and touch up paint and do it yourself,watch a ytube video on how to bondo and touch up small dent .quick estimate if you didnt have anything grab this kit some sand papper $10.00, and some touch up paint about 15.00 and you can get to match car just go to pepboys and they will get you the correct match,some tape and newspaper and your good to go its easy,if your car is really nice paid to have it done, if its not a really expensive car try it yourself. cost you $30 to$40bucks good luck watch a few viedos Zoom [+] sale price $13.49 3M Bondo Small Dent Repair Kit Part #: 1314| SKU: 401706

cOSMiC jAY Forget about it. You’ll fix the ding and then smash it into a tree. It’s just a car.

Hafta keep u focussed !! 😅😅

This is porn for guys like me that buy and sell cars