Since the filming of this video, we have developed our own red clay Chemical which is perfect for this kind of work, without the hazards of aluminum brightener acids. Check out the link and get some today. www.southeastsoftwash.com/product/mud-may-day-stain-remover/

I truly appreciate your videos. Just getting into the soft washing business out here in NW Oklahoma. It's tough sledding out here trying to get people to come around to getting their homes/business cleaned. Using your tips to help get those sales. Hoping to get enough jobs to be able to reinvest into the company and get one of your soft wash systems. Thank you!

Hi Coty, Thanks for all the chemical tip and safety steps. Always learning good stuff from your channel. Michael C - (WA)

Cody thanks for the detail,thoroughness and explanation of the process ! Very nice video, thanks for sharing your knowledge & experience.

Thanks again Mr. Coty for another great video. It is so good to watch a video that contains common sense for common people. Looking forward to more videos in the future.

Another good video by Cody doing that you have a good work man when I save up enough money I'm going to get one of your rigs

Thanks for the great how to videos, helps so much. Love my skid we got from you last year!! Thanks

Appreciate the content, especially the safety protocols. Soaking the education up like a porous surface....” see what I did there!” Looking forward to breaking some bread with your team will be contacting you next week.

Thank you Cody for sharing. I am finding there is more to this than “ splash and dash”

Great video Cody. Thanks

Hey Cory! Hope all is well, what do you suggest I could use to remove aluminum oxidation run off on brick siding?

Great video Cody 👍 Great info

some really heplful videos. i really wish your channel had playlists for the pressure wash how-tos.

Always learning. Thank you

This was really helpful. Thanks!

This couldn't have come at a better time, thank you for the video.

Try a Chem called Osfo or Chem prime.. these both work amazing on rust stains.. of course pre wet .. keep wet .. then rinse well

Lots of pearls of wisdom in this video!

Great helpful video!

F9 barc is very similar to aluminum brightener and would have been the best to try after the F9 efflo since barc removes rust. Great video thanks for sharing

Thank you!

Where’s the best place to purchase aluminum brightener? Thanks in advance

I like your little training videos

I'm curious how any of these chemicals affect plants and grass. I don't want to kill my Bermuda by cleaning my driveway, lol. Do you have any feedback for that?

How many psi power washer do you recommend for this type of job

Can aluminum brightener remove rust on painted aluminum siding

Will aluminum brightener damage concrete for red clay removal?

Thank you for your help!

So better value is aluminum brightener at 50/50?

Cody, do you go back and neutralize after or just leave it after rinsing? GREAT video comparison! Tysm

Where can I get some of these chemicals? Are they sold in local stores?

Great video 😎

Great info to absorb. I will be putting it to the test this week for 2 jobs👌

They have been using aluminum brightener from Napa for years and years to get red clay off of dump trucks that's what it's made for to get the alkaline pill that causes the Red dirt aluminum brightener is made for red mud I don't know understand why these cats don't like using it's what it's made for, once again it's made for red clay alkaline and it's a lot cheaper and it's you used it at 50/50 you don't have to use it at full strength like you do with them other things, and you can get a MSDS data sheet on it no big deal, plus you can buy this stuff anywhere you don't have to drive 50 miles till you close the power wash door or wait 3 days to get it from Ohio I don't understand why people don't like to use it

Happy Monday Cody , i’m from California I have a question I’ve noticed around some houses out here they have the rust or iron stain on the stucco walls we have a lot of sand I’m not sure if you consider that red clay. My question is this if the customers going to paint their house do you recommend them having the iron stain removed before painting or does it matter if you paint over it?

I cant tell ya how many houses I've done and then still have clay staining and I feel kinda dumb cause I cant get it off(didnt want to use too harsh of chemical and mess things up)this is a gamechanger!!

Excellent video

This video is super informative Your doing an amazing job schooling and helping us and others in this field and it’s like a huge network and brotherhood we’re in and we appreciate these helpful tips man 👍 #littlespressurewashingservice

Great video!

Thanks for explaining things

Seems like the alum brite works best with higher dilution compared to using almost straight with other 2 chems that probably cost 2x as much as alum brite.

What's in the aluminum brightner, buytal? And isn't that f9 eflo for calcium build up?

What about on Stucco homes??

So glad we don’t have red clay down here on the coast!

Any recommendations on what products are safe to clean red clay off a mortar wash brick exterior?

Hey Cody, how much should you charge for residential red clay removal on a home?

Good video ,very informative. That red clay is a pain in the butt. The longer it sits the harder it gets.

Hey man I live in North Alabama and want to start a side business doing pressure washing on the weekends and was wondering what is the highest gpm pressure washer I can buy without needing a buffer tank?

hey i bought some of your mud mayday for our new construction and it seems to work great on the stone but what about coated brick? we are struggling trying to get red mud off of it

I love how u tested the different products can you do more videos like this, it's quite informative thanks 🙏

Great video

Can you run aluminum brightner thru your soft wash machine ? I have a job coming up and tried a little sample in pump spay bottle but wasn’t sure if it’s possible in my soft wash machine

Good video 👍

I have red clay on my retainer walls, we have power wash a couple of times with water , bleach, and hydrochloric acid and it still not coming off. Any suggestions? Thank you

Thanks

Cost-wise where would you be if you used one over the other on the entire job?

Amazing videos

For red clay I find oxalic acid the go 👍 sweet vid

But I took from this video is it takes less aluminum brightener versus those other chemicals on this particular job you did in the video another words I would use less chemical if I did the whole job with aluminum brightener!

I washed a Church before with just a typical house wash mix and the red clay dirt wouldn’t come off. The other part was clean, but I just didn’t charge them. Thanks for this video!!!!

Is f9 barc the same thing as the f9 ecoflow stuff??? ??

$200 - 225 for one wall or 360 degrees around the church, please? Also, would you provide links to the products you are using sir?

when i lived in Georgia i installed paver sidewalks patios driveways and we cleaned and sealed them we used muriatic acid to clean the bricks there is a lot of clay in Georgia too lol

what is the purpose for adding chem to water?

Thanks for making the videos they are very informative whether you are in the pressure washing business are not.

I bet aluminum brightener wood work on tiger striping on gutters .

Can you use aluminum brightener for rust removal as well? Another great video. Walter seems like a real big Johnson.

The only thing I miss about living in Atlanta is the red clay… ok, it’s just one thing on a long list. City life ain’t for me!!!

Hey I was going to swing by and pick up a few things, but y’all aren’t doing the local pick up, so I had to ship it. You got my info, hit me up when you want to go to the range!

Will f9 barcs work?

Thank you for all that you do. I love how you show stuff but not necessarily hold peoples hand. Ol' Walter Johnson woke up and decided to be the wrong type of salt to the earth.

Pre Trib or Post Trib Cody??

It’s funny how the man says “these are just a few of the products out there. There are MANY more you could use”. You would think this would keep the silly salmons from swimming upstream, but then they wouldn’t be silly salmons, would they?

F9 Efflo instead of BARC?

“Just use acid” - an expert.

"Because, We're not a chemical company" Oh how the turn has tabled. 🤓

👌

Should we hit that brick with that high of PSI aye??

If you don't know what chemical got in your eye, you have to taste test the chemicals lol jk

Aluminum brightener it is 🤣🤣

Efflo is the wrong f9 for this, efflorescence is a totally different animal. Barc is as good as it gets. Too easy.

Less talk, more demonstrating

Why can't people read the instructions? You know on the back. SDS Wall Mart Lmao.

Until tribulation and we’re all outta here in Jesus Christ name!!! Amen!

Awesome 👏 thank you, the Lord bless you ! Good tips for me, I just starting aging my pressure washer business ! 🫡🇺🇸

Very helpful video. There's no shortage of these stains in SC, but I've been hesitant to offer the service given the price of the chemicals paired with my lack of experience using them.