How To Remove Rust From Any Gun or Firearm

No video

How To Remove Rust From Any Gun or Firearm

Рет қаралды 1,339,853

7 жыл бұрын

*BUY NOW-www.metalrescu...
In this video you will learn how to remove rust from any gun using Metal Rescue Rust Remover Bath. Metal Rescue is your clean, safe and easy way to remove rust from any gun, or metal. Watch for yourself and see how clean, safe and easy Metal Rescue is to use. To keep the rust off, just spray it with Dry Coat Rust Preventative spray.
*NOTE: Metal Rescue will remove bluing from guns and oxide coatings. If you are unsure if your part is safe for Metal Rescue, please test a small area first before submerging your entire part.
Cant' soak your part? No problem, Metal Rescue now comes in a GEL for those large or bulky parts you can't soak. Learn more about it here: • How To Fix A Rust Spot...
Like what you see? Subscribe to learn more about how Workshop Hero products can take the work out of your workshop!
www.youtube.com...
Still not convinced? Check out some more of our videos!
• How To Remove Rust Fro...
Metal Rescue® works by utilizing a water-based, safe synthetic molecule that is attracted specifically to iron oxide (i.e. rust). Metal Rescue removes the iron oxide and holds it in solution, leaving the base part and other materials safely unaffected. Rusted parts can be restored in 5 minutes to 24 hours, depending upon the amount of rust, type of metal (iron and steel), and temperature of the solution. Dry Coat™ Rust Preventative is a water-based liquid that dries to the touch leaving a clear protective coating on the surface of ferrous metals. Dry Coat™ does not attract dirt or dust and provides indoor protection for up to one year.
Please keep these tips in mind when using Metal Rescue® on your painted item. Metal Rescue will not remove or harm the vast majority of paint coatings. However, if there is a layer of rust under the paint some of the paint coating will be lost as Metal Rescue removes the rust. Also, some paints (and inks) may use iron oxide pigments (usually orange or red). Since Metal Rescue has been engineered to remove iron oxide, it may dissolve the pigment in these types of paints. It is always best to test on a small section or hidden area prior to use.

Пікірлер: 1 300

@BlasterProducts 7 жыл бұрын

Have a question or comment? We want to hear! Write it in below, or give us a call now! 1-800-365-1117 Thanks for watching!

@alvinthompson6333 6 жыл бұрын

How long has this stuff been around? I've never heard of it before.

@BlasterProducts 6 жыл бұрын

Hi Alvin, Metal Rescue has been around since the early 90's. Pick a jug up and try it out for yourself! Thanks for watching!

@snowwhite7677 6 жыл бұрын

Here is a challenge for you. I have a 1913 S&W Auto that is Frozen with rust. Here is some pics from another one on auction: www.gunbroker.com/item/710566796 If you look at picture 11, that is where the mainspring and dial safety are housed. its pretty much frozen on mine and its also machine tight tolerances in that area.(hard for liquid to penetrate into) Picture 4 shows a tiny flat blade screw directly left of the top of the wooden grip. That is also frozen on mine.

@xfilesdavidbennett8574 6 жыл бұрын

Metal Rescue Rust Remover Bath from Workshop Hero I cannot find metal rescue in any of the Home Depot stores or AutoZone stores in Houston Texas and I want some

@BlasterProducts 6 жыл бұрын

Hi David, can you give us the zip code of the Home Depot and AutoZones you went to. They should both have it on their shelves. Thanks!

@matthewbritton9669 4 жыл бұрын

This may be perfect for removing rust, but if you want to keep the blueing, boil your gun it water for about an hour, and brush of Surface rust with brush, cloth, or degreased steal wool (do not use a wire brush) and your gun will be good as new, just make sure the gun is completely dry. The rust will covert back to blueing, and will save its value. I’d only recommend using rust remover if you want to remove blueing and rust for refinishing, or if you want a gun in the white.

@aardvark5730 3 жыл бұрын

Boil it in water for about an hour, then use very fine steel wool. Rinse and repeat if necessary. It spares the original bluing

@josephsimeon6117 2 жыл бұрын

0000 steel wool won't remove the bluing but any other size can

@BrlU Жыл бұрын

Is that without the rust removal solution? Only water and rusted prts?

@aardvark5730 Жыл бұрын

@@BrlU only water, boiling the parts and carding the loose oxide off will convert the red rust to an inert black oxide

@jamesmadison8743 Жыл бұрын

Thank you for that bit of knowledge friend, I’m gonna try that.

@codyclark6073 9 ай бұрын

How would you boil a barrel just curious? Just got a top slot iver johnskns 12 gauge I want to clean up

@jonathansimmonds5784 3 жыл бұрын

I've just inherited an old H&R here in England, they get about! No rust, a little bit of black pitting, shoots beautifully.

@MrJoey1970 5 жыл бұрын

i use white vinegar myself and it works very good and it just cost $2.50 a gallon i use t on tools all the time with great results.

@bueford668 3 жыл бұрын

I just picked up an 1873 Winchester 32 that was in a storage unit for over 30 years. It reminds me of Jimmy Stuarts movie 1873. It looks so cool but with rust and is froze up. The stocks are perfect.He had it sitting against the wall in the unit. Everyone thinks I can bring it back to pretty good shape, I will have to try this in my Blacksmith/workshop. maybe I will film it.

@Imgonnachange Жыл бұрын

How is it now

@daveleary5830 Жыл бұрын

If you're going to reblue it do you skip the protection spray step?

@Antho1010 Жыл бұрын

i want to know that too

@jonathanturner9617 3 жыл бұрын

Its a Hairrington Richardson topper M48 shotgun.

@RyanKetcheson 7 жыл бұрын

That looks like a H&R Model 1908 Single Barrel Shotgun. Am I right?

@BlasterProducts 6 жыл бұрын

Hi Ryan, Congratulations! You are the first person to get the answer correct! Please email us at info@workshophero.com to claim your Free gallon of Metal Rescue Rust Remover Bath! Thanks for watching!

@andrewhill7595 6 жыл бұрын

I knew it too I have one needing rust removal too and my buddy showed me a link to your product..mine is a 10 guage H&R..

@timgiles9413 5 жыл бұрын

@@BlasterProducts That's the answer I came up with also. I have many H&Rs and NEFs. I love my single barrel break action 12 gauges. The most versatile guns ever. May I have a free gallon please? :)

@BlasterProducts 5 жыл бұрын

@@timgiles9413 Hello. Thanks for watching and commenting on our video. Ryan actually won the Free Gallon of Metal Rescue. We do offer free shipping on our website on every order! www.workshophero.com/shop/ We are sorry, but are unable to give away a free gallon at this time. Again, thanks for watching, please let us know if you have any questions on our products!

@Njennings42 5 жыл бұрын

wow really? That is exactly the same gun as my Iver Johnson Champion.

@drm340 4 жыл бұрын

so does the stuff really work or is everyone fascinated by the gun

@canadian_wolf8395 3 жыл бұрын

Last year we had a house fire but my dad got the contract to knock it down and clean it all up so we got to go through the house to find anything good and we took all the tools and guns out of there. The guns will never be good to fire but we still took them but I got to restore everything and this product does work but vinegar works just as good if not better and is way cheaper but it does have a strong smell that will stick to clothing

@sethmadison4347 2 жыл бұрын

In the process you also removed the bluing. Similar to vinegar use. Effectively destroying the value and protective finish.

@nickbrooks2408 2 жыл бұрын

That's crazy! I was looking how to remove rust from my grandfather's old rifle. And he is cleaning is the same one as my grandfather's.

@qz2026 5 жыл бұрын

Excellent. My primary question was the impact on the bluing. I did order some gel for my wheel hubs and the rust on my trailer hitch frame within the bumper. I suspect this will work great for those projects. But, for a gun, be careful with any chemical you put on it unless you plan to reblue. Of course, I would probably wire wheel the metal and sand until the finish was smooth. Then reblue and have a new looking gun.

@Icanhasautomaticcheeseburger 4 жыл бұрын

Bluing is a form of rust -- this stripped it all.

@tripplebeards3427 3 жыл бұрын

I use vinegar from the $1 store. It takes 4 hours with a piece of steel wool or an SOS pad. Wash all the parts off in water when your done to remove the acid from the vinegar. You still have to file and sand all the pitting when the rust is gone. I make sure to oil my gun down and also wax the metal parts after I re blue it so the rust will never come back. Looks like an old Stevens.

@uplift56 2 жыл бұрын

Did the vinegar remove the bluing??

@sidekickbob7227 2 жыл бұрын

@@uplift56 yes, everything that removes rust, will remove bluening. Bluening is simply transformed rust. Vinegar is no exception. One of the safe ways of deaing with rust is to boil the part. This will transform the rust to bluening. Use a very fine steel wool to carefully brush of the loose stuff after boiling. Then let it soak in oil.

@tfcig2019 Жыл бұрын

@@sidekickbob7227 what type of oil? Husband got me a used lc9 that I kept in zippered pouch it came in. Never used it. Went to clean it & found it full of dust bunnies & half rusted. Trying to find best oil to put on it, to help keep it rust free. Thanx

@raymerten7089 8 ай бұрын

@@tfcig2019aqh1 LA qt crescent is any

@hereditarysedentary6812 4 жыл бұрын

How does it penetrate screwed in parts? I found a Winchester Model 69A .22lr that got absolutely fondled by the rust gods, the magazine tube withstood a lot of PB blaster amd WD40, impacts and tool assisted twisting.

@dennisbrooks240 6 жыл бұрын

Iver Johnson Champion. I am cleaning one now. Fore grip trashed, filled with plastic putty. Putting in dowels.

@Apexarmoryffl 6 жыл бұрын

Holy crap! Why haven’t I ever heard of this stuff?! I have to get some.

@BlasterProducts 6 жыл бұрын

Hi Midwest Bodybuilding, pick some up at your local Home Depot or AutoZone. Or order directly through us! www.workshophero.com/store Thanks for watching!

@wb8ujb 6 жыл бұрын

I just looked at my Dad's gun as I recognized it. That is a Champion, Iver Johnson's Arms & Cycle works. Dad's is a 12 gauge. He has passed on, but used this in upstate New York at his home.

@doc6115 2 жыл бұрын

Nitro Hunter, 12 ga, single shot, manufactured by one of three manufacturers (two in Connecticut and one in Massachusetts) and wholesaled to Belknap Hardware and Mfg. Company between the late 1800's to roughly the 1930's. Original cost was between $15 and $25.

@Hiflier35thCAG 3 жыл бұрын

H&R Topper Model 48 is my guess. I have a Topper model 88 which has the thumb push down release instead of the side push. Very similar parts with my 88 otherwise

@jameshamer4898 2 жыл бұрын

I have the H&R Topper Model 158

@davidwinder3287 6 жыл бұрын

Is it a Harrington & Richardson model 1900 12 Ga.?

@5783greg 3 жыл бұрын

After seeing the butt plate, I agree.

@ElMartino23 2 жыл бұрын

Definitely a Harrington & Richardson Arms Shot gun. I’m literally researching how to remove rust from my H&R .410-44 cal shot gun. 4years too late for the contest but still.

@user-ox4bv3it4i 2 жыл бұрын

Right, i wanted to remove some rust from my great granpas m48 topper lol

@lowellflewellen7677 2 жыл бұрын

Early model Stevens 12 gauge single shot break open. It has the milled wedge on the right hand side to take the barrel off it doesn't have the screw to release the barrel I'm doing one right now.

@larrycable1948 3 жыл бұрын

How does this effect trying to finish the metal parts, say with quick blue or cerrocote?

@ArmaGuyz 2 жыл бұрын

Why on earth would you want to put something on your gun to remove rust that will remove the bluing? There has got be another way.

@justinbrooks9454 17 күн бұрын

Because there are people like me who dont like the look of blueing and prefure white metal

@DarkBalladYT 4 күн бұрын

@@justinbrooks9454white metal is more susceptible to rust and patina

@danfraser7479 6 жыл бұрын

That looks like an Iver Johnson Champion.

@aleksandrov837 3 ай бұрын

This gun is a winchester model 37A mad in the year 1937 it also has a another version of it and its called the winchester mod 37 wich is a single shotgun too but the winchester mod 37 was made before the winchester model 37A

@brockbowers8739 3 жыл бұрын

Is it still ok to blue gun if you used dry coat or would you run into problems when you are going to blue the gun?

@user-pb1rt6bk5q 6 жыл бұрын

Iver johnson single barrel single shot 12 or 20 gauge

@arlwhe1640 6 жыл бұрын

12 gauge

@blkrfldiv 6 жыл бұрын

What will it do to a chrome lined bore?

@BlasterProducts 6 жыл бұрын

Hi, Metal Rescue is safe on chrome. It designed to only remove rust! Thanks for the question, please let us know if you have any others.

@ladygolden319adistractedga5 6 жыл бұрын

It is a Harrington & Richards 12 ga single shot break action shotgun.

@johnholowzak9719 6 жыл бұрын

try good ole molassis turns into phosphoric acid that eats off rust then wash off the rust and pat dry no rust on the surface metal because its protected by a fine coating of phosphoric

@BlasterProducts 6 жыл бұрын

Hi John, There are many ways to remove rust. That being said, Metal Rescue is the cleanest, safest, and easiest way to do it. We compared Metal Rescue against molasses in this video. We found that Metal Rescue worked considerably faster on removing rust. Watch for yourself and you can be the judge on which one worked the best! kzfaq.info/get/bejne/hKh2oZWEy8Wblqs.html Thanks for your comment, and thanks for watching!

@seleronvargas 4 жыл бұрын

H&R, Harrington & Richardson. 1908 Shot gun, it's was my first shotgun. Good information and seems like a good product for as a rust cleaner. Tho rust cleaner ain't needed, As mine is already very well kept, The one you cleaning seems like someone was going fishing with the shotgun lol

@CL-dy7pn 4 жыл бұрын

I need that in my life lol I have a really stubborn 1920 savage model 520 riot gun im trying to restore

@GeorgiaRidgerunner 4 жыл бұрын

Dont restore it those savage riot shotguns are the rarest of ww2 military shotguns

@googlepissoff5776 4 жыл бұрын

georgiaridgerunner 79: It’s no good to anyone if it’s pitted all to hell and unsafe to shoot, I say use a penny and some 3 in 1 oil

@GeorgiaRidgerunner 4 жыл бұрын

@@googlepissoff5776 redstoring it will decrease the value if its pitted the integrity of the metal is compromised and may not be safe to shoot no matter how much restoration one does

@googlepissoff5776 4 жыл бұрын

georgiaridgerunner 79: rust removal and oiling isn’t restoring, its basic maintenance that anyone who cares about the history, value, or performance of a firearm should do

@CL-dy7pn 4 жыл бұрын

@@googlepissoff5776 it has all the original blushing on it I thoroughly cleaned it and test fired it it shoots like a brand new gun but im going to keep it in the gun safe

@ShockAndAwe417 6 жыл бұрын

Looking to use this on a really beat up and neglected Enfield No.4 Mk.1. If I plan on bluing it, I shouldn’t spray it with the rust preventative, correct?

@BlasterProducts 6 жыл бұрын

Keep in mind that Dry Coat is a temporary rust preventative. It will wash off with soap and water but will protect it from the rust coming back for a year. You could spray it with Dry Coat, and before the bluing process, you could wash it off if it's going to sit for awhile. Thanks for watching, please let us know if you have any other questions.

@Vikrant-S-Khurmi 6 жыл бұрын

What about the pitting on the metal surface ? Any solution to that problem

@peteloomis8456 3 жыл бұрын

The only thing you can do about the pitting is to get yourself a sanding block & use some 60 grit emery cloth with water & soap to level out the surface start at the 60 then go 80 -120 & so on to smoothen out the scratches ending up with a 600 & finally 800 at the end . I did this on a old 1930s 16 gauge double barrel shotgun I bought years ago that was kept in the trunk of a car a friend had with no case on it & paid 25.00 for it. I got lucky because the bores were in nice shape yet but it had rust issues on the outside of it on the receiver & barrels so I spent a few hours each day sanding until everything looked & felt straight with no pitts or scratches on it . Once I did that I just re blued the receiver & barrel & it looked like new after . I had a friend of mine strip the stocks & stain & seal them as well & it looked like a new gun. I used it for years bird hunting then eventually sold it unfortunately but did sell it for quite a bit more than the price of the gun & materials to restore it but now wish I still had it .

@Vikrant-S-Khurmi 3 жыл бұрын

@@peteloomis8456 Thanks. 👍

@ericjohnson6784 4 жыл бұрын

The H&R logo on the butt have it away. And you even panned on it for a couple seconds

@thomasluce8298 7 жыл бұрын

H&R 12 gauge. I got to get me some of this stuff is it sold at o Reilly's as well?

@BlasterProducts 6 жыл бұрын

Hi Thomas, Metal Rescue Rust Remover Bath is only sold at Home Depot and AutoZone. Not at O'Reilly's. Thanks for the comment, stay tuned for the announcement of the winner.

@rem870wingman4 6 жыл бұрын

Hi, I was wondering would metal rescue hurt the rifling in a rifled barrel?

@BlasterProducts 6 жыл бұрын

Hi Jody, Metal Rescue is safe on all metals except for magnesium and magnesium alloy. Keep in mind that Metal Rescue will remove oxide coatings like bluing from your gun. Thanks for the question, please let us know if you have any others.

@shaneferris69 4 жыл бұрын

I have a mod. D.D. 45 . It's know as the judge shot 64mm 410 or 45 .. it is a priceless gun to me my brother gave it to me and it is rusting somehow . So my question is . Is it ok not to take it apart before I soak it in the rust remover... Thanks

@pj6208 5 жыл бұрын

This is actually a Glock model 1871 shotgun forged from leftover Excalibur metal shavings...Damn! How are there so many random answers on here yet everyone is sooo convincing😂 I'll read one answer like "hmmm maybe" then the next seems correct. Idk wtf it is but I have a few my father in-law left in our shop. If anyone is interested let me know

@popsdsr Жыл бұрын

Pj620 Seems just about every subject have the same situation. Sop many conflicting answers and they all sound convincing.

@GunDrone 6 жыл бұрын

That shotgun is an H&R "Topper" model 12 gauge i used to own one. Year that it is, i have no idea.

@charlesc.plumley9755 4 жыл бұрын

Hello I think this shotgun is an old Crescent Arms Co. 12 guage. Thanks

@johnathanwooten3340 4 жыл бұрын

Looks like my "the sportsman" by Cleveland 12ga

@ronaldwilson1157 6 жыл бұрын

I'd say that you have a Stevens shotgun.

@brianbutcher8216 2 жыл бұрын

Looks like a j stevens arms or one of the other ten companies they worked under lol

@johnrogers1149 5 жыл бұрын

yeah the gun guys use them in your video is an old h&r 12 gauge shotgun on many of them as a kid that stuff is awesome really like The Prado

@johnridge3675 2 жыл бұрын

That’s a “Topper” 12 Gauge made by H&R Harrington &Richardson in Drummondville Quebec. Thanks Johnny 🤠

@jigger0516 6 жыл бұрын

Awsome video!! Definitely going to be looking into that stuff!

@BlasterProducts 6 жыл бұрын

Amie Leger Thank You! Please let us know if you have any questions!

@toddgreening374 4 жыл бұрын

Looks like an old Cooey 12 guage, my dad has one that I've been coveting for 50 years.

@michaeldetwiler9392 2 жыл бұрын

I have a Stevens "backpack gun" interchangable barrel rifle. I only have 20 guage barrel currently. I also have a savage with 2 interchangable barrels 410 & 20 guage. One has hammer other has a internal 📌. Between the three I got rabbit to deer which I loved as a kid cause I'd break gun down put in My jacket to drag deer. Fun guns. Thanks 4 the memories

@katykayy 4 жыл бұрын

What about inside the barrel? How do you dry that?

@LisaJohnson1967 Жыл бұрын

I'd say a cleaning rod & cotton patches. And maybe set it up so a fan is blowing air through.

@inglwud5625 7 жыл бұрын

I have the same shotgun its a bridge.

@kevinroark4346 6 жыл бұрын

ingl wud i have a new port like it that was my Great grand dads from early 1900/late 1800's i cant find much on single barrel newport 12g.i know they were not costly.but it was my great grandpa's

@JohnDoe-iw7zc 4 жыл бұрын

Its a hard gun to tell since there are like 50 guns that look like that

@ScottFarry 6 жыл бұрын

That is a Harrington and Richardson. I have a rusty one that looks exactly like it

@immex5694 3 жыл бұрын

Question. My gun is so seized up i cant unscrew many of the screws. I know its been soaked in yak grease for 100 years. Should I just soak it fully assembled?

@degruenib8675 3 жыл бұрын

Don't listen to this video. The correct way according to my knowledge is to take it apart, remove all oil, then steam or boil all parts, and then brush it with a cardwheel or fine steelwool. this way you can convert the rust and you are not just destroying the 100 year old finish like this human example did. The finish is a very thin layer of feroferic rust or magnetite and you can bring this back. Never put wood parts in any water or rust removing solution, you will absolutely destroy the stock. I recommend you bringing your gun to a professional gunsmith. Check out Mark Novak's channel if you want real advice on gun restauration. I mean just look at all the cracks and bad repairs in the stock of this shotgun in this video and the terrible condition of the steelparts, I hope for him he is not intending to shoot that thing, cause I sure wouldn't!

@IHSIHS-qm6jt Жыл бұрын

This is an Iver Johnson, Champion model, single-shot break-barrel shotgun. Also made for Montgomery Ward under the name Western Field. Do I get a free gallon?

@vincentbaelde-millar670 4 жыл бұрын

It's probably worth mentioning that some gun finishes are very similar to rust, so the will probably un-blue your old gun as well as removing rust

@BlasterProducts 4 жыл бұрын

Hi Vincent, you are exactly right. Metal Rescue will remove oxide coatings such as bluing. Please test a small area first before submerging your entire gun in Metal Rescue if you are unsure.

@user-jg9xm2kz3h 7 ай бұрын

He did mentioned it you don't listen

@dalewberger624 6 жыл бұрын

It is a Harrington Richards shotgun

@johnmcneely4717 4 жыл бұрын

Looks like an old Ivory Johnson 12gage long tom

@kentobin3045 4 жыл бұрын

Looks like an 12Ga Eastern Arms / Single shot. Working on almost the same model.

@Nathanrayferguson Жыл бұрын

I have a question can I use this on a nickel plated gun and I’ll boiled my parts before using this

@anthonyblocker7171 6 жыл бұрын

It's a Steve model 1928-1929 12 gauge single shot

@mableblessing4816 6 жыл бұрын

pallmeto arms co. 12 gauge i have the same gun single barrel

@babydraco1898 6 жыл бұрын

H&R topper m48 model single break barrel ?

@kenadams3951 5 жыл бұрын

I use that stuff on skin tags.. Works well...

@dalecarpenter8828 4 жыл бұрын

Hirington richardson single shot break open 12g shotgun ! Or a clone !

@glennhoke1027 3 жыл бұрын

I agree with you

@sarap3936 5 жыл бұрын

Can you re blue the gun metal after using this product

@dalanwanbdiska6542 4 жыл бұрын

You have to if you want a finish on the gun. It only removes the old finish and keeps it lubed up for rust protection while you get a finish coat ready. So yes reblue.

@murfdog2216 Жыл бұрын

Looks to be break action single shot shotgun probably a 20 or 12 ga! I'm guessing either a Steven's or an H&R???

@marionrobbins1158 6 жыл бұрын

Definitely a H&R Model 1908 Single Barrel Shotgun.

@scottie027 4 жыл бұрын

I have a gun like this that belonged to my great great grandfather. Thankfully mine is in a lot better condition 😀

@cobain198 2 жыл бұрын

Same! Just got it from my father. It’s in good shape but rusty

@1968shinobi 4 жыл бұрын

I own a 12 gauge Mississippi Valley Arms. Co Rifle. That looks like your rifle in the video. Respectfully , Todd Gillette

@mrIappsreviews 6 жыл бұрын

That's a Champion 12ga made by Iver & Johnson Arms

@Nathanrayferguson 5 жыл бұрын

correct

@unfriendlies8000 5 жыл бұрын

nope

@dabarboza51 6 жыл бұрын

I think u devalue the guns by doing this. It removes the original gluing?! Does it also remove the nickel plating? Most collectors really like to see original finishes. I think there's another better products out there that will dissolve rust not damage the finish.

@BlasterProducts 6 жыл бұрын

You are correct. Metal Rescue will remove oxide coating such as bluing which will devalue some old guns. Please keep that in mind before using Metal Rescue. That's a great point Da Barboza!

@MrZing0 4 жыл бұрын

Nice I have one of these guns my grandpa just gave me was wondering how to do this.

@dontcallmetravis 2 жыл бұрын

Does this rust solvent remove the case hardening too? Does anything else remove rust but leave case hardening?

@darrellblanchard2362 6 жыл бұрын

H&R before the topper came along

@ChrisLoew 6 жыл бұрын

Removes bluing? 😐

@BlasterProducts 6 жыл бұрын

Hi Chris, yes it does, so keep that in mind when using Metal Rescue Rust Remover Bath. Thanks for the question, please let us know if you have any others!

@bekeex 6 жыл бұрын

buy a bluing kit or spray paint it.

@CalculusVariations99 6 жыл бұрын

Bluing is a type of controlled rusting.

@Salad360 6 жыл бұрын

I might use this stuff specifically to remove the old finish from a gun and redo it with duracoat.

@ididthisforthecomments.5893 5 жыл бұрын

Taylor Pinkham you can duracoat over any finish, just wipe all the oil off the surface. it’s actually better to keep bluing under the duracoat so that when it inevitably scrapes of it won’t rust in those spots so fast.

@1tyme4yomindtx22 5 жыл бұрын

Stevens Arms, Texas Ranger 12ga .... ( so by Montgomery Wards )

@kostashellas3339 6 жыл бұрын

very good work congratulation!!! I have one same shotgun but I don not know the brand. I see your video and looks same, how can I found the brand?

@BlasterProducts 6 жыл бұрын

Thanks! You can go here to purchase it online or in Home Depot or AutoZone in US. www.workshophero.com/buy/ Please let us know if you have any questions!

@davidpresnell8342 6 жыл бұрын

looka like an H&R. probaly 12 guage

@mr.mojorisin9999 5 жыл бұрын

Glock with extended clipazines

@ChuckD59 5 жыл бұрын

How would it be to soak an electric motor in it? Specifically an AO Smith pool pump motor that suffered through a season of a leaky seal. The rotor spins freely and it worked fine end of last season. But upon taking it apart to replace the seal I found a lot of rust and corrosion built up on the windings and inside the shell (electric bits look fine and can be isolated.) Thanks for the great video.

@BlasterProducts 5 жыл бұрын

Hello Chuck. Metal Rescue is safe on everything except magnesium and magnesium alloy. It's only designed to remove rust from metal. If the rust is really isolated and you do not want to soak it, we do make a GEL form of Metal Rescue. Both products can be found at your local AutoZone or here on our website. www.workshophero.com/shop/ Thanks for watching, please let us know if you have any other questions!

@edmundwhite5050 4 жыл бұрын

@tachankaisgod6689 6 жыл бұрын

What about a gun that’s rusted shut? Relative left me an old revolver that’s rusted shut. In the video you specifically said to disassemble the gun but that’s not an option with this gun. Any damage done buy putting it in whole then trying to disassemble it after a couple hour bath?

@BlasterProducts 6 жыл бұрын

Hi Tachanka, you can submerge the entire gun in Metal Rescue. It is safe to do so. Metal Rescue is not an acid and will not harm any metal except for magnesium and magnesium alloy. Also, keep in mind that Metal Rescue will remove the bluing from the gun. Just drop it in Metal Rescue and let it soak until all of the rust is gone! Thanks for watching, please let us know if you have any other questions.

@minenotyours6906 6 жыл бұрын

I guessed before seeing the butt plate what a dead give away

@smartacus88 5 жыл бұрын

Is it safe to use on a chrome lined barrel?

@Phucyue 6 жыл бұрын

. I'm trying to gold plate my glock will it remove the paint from all my stock black parts

@BlasterProducts 6 жыл бұрын

Hi Daniel, no, Metal Rescue will not remove the paint from your glock. Metal Rescue is not an acid and will not remove anything except iron oxide. Thanks for watching! Please let us know if you have any more questions!

@lhb4031 6 жыл бұрын

This is good stuff, I will try to clean my STEVEN'S DOUBLE OUT SIDE HAMMER 12G. THANKS FOR THE VIDEO

@BlasterProducts 5 жыл бұрын

You're welcome! Let us know if you have any questions!

@Mikestefan 4 жыл бұрын

It will take the blueing right off your gun. Bad idea.

@cavscout888 4 жыл бұрын

It's better to BOIL or STEAM the gun, converting the ferrous oxide to iron oxide, and then scrubbing off any scale. That gives you back you're rust or hot bluing!

@whyaskwhy99ify 6 жыл бұрын

H&r single shotgun 12 or 20 gauge

@had1_awresomboss246 Жыл бұрын

I have a ww1 ruby pistol and its not terribly rusted its just surface rust but still rust i was wondering how to get rid of it without removing the bluing

@BananaRaid 2 ай бұрын

Steel wool 0000

@xfilesdavidbennett8574 6 жыл бұрын

well I got my metal rescue but I can't find that rycote that y'all mentioned in this video I need to bottle of dry coat or I can spray can of dry coat where can I get it at. Home Depot don't have it

@andycampbell4043 Жыл бұрын

1968 acquired. IvernJohnson 12 GA brake .could this be?

@TreasureTrail 3 жыл бұрын

We find treasure like this all the time!!! We use acid on rust. Great educational video.

@chrisbuck2918 2 жыл бұрын

Would this be safe to use on a military weapon? Say for instance, a M16?

@gamerbot101 5 жыл бұрын

is this safe to use on old antique nickel plated revolvers?

@BlasterProducts 5 жыл бұрын

Hello, Yes, Metal Rescue is safe to use on Nickel plated revolvers. It's safe on everything except rust! Thanks for watching, please let us know if you have any questions!

@adegbolababade4880 5 жыл бұрын

Hello all, after doing this and removing the paint coat. will bluing restore the colour of the gun?

@mikepowell3873 3 жыл бұрын

a Harrington and Richardson 12 Gauge / Topper . had only 2 3/4 lnch chamber .

@andrewjconners 6 жыл бұрын

so you don't need to scrub anything? You can just leave it soaking and wipe it off?

@BlasterProducts 6 жыл бұрын

Yes canes, that's correct! Let Metal Rescue do the work for you! Just let it soak! Thanks for watching, please let us know if you have any other questions!