How to remove stuck grinder disc nut without tool

Рет қаралды 27,306

3 жыл бұрын

Last resort method on How to remove a ceased up grinding disc nut and remove the jammed grinder disc. And get back at doing your indoor or outdoor projects.

Пікірлер: 21

@jlolson53 2 жыл бұрын

Thanks, Stefan. I only cleaned the wheel flush with the securing plates/nuts allowing a pipe wrench the surface area to strongly clamp the piece. That worked for me.

@gustav-adolfschildt 2 жыл бұрын

Stefan, greetings from the Philippines. What a great idea. May you and your Family be safe

@gustav-adolfschildt 2 жыл бұрын

Stefan, a few days later I did complete the task. A better way is instead using a screwdriver use an old hacksaw blade to remove the remaining bits from the shaft. Anyway it works like a charm.

@baaghiisu 2 жыл бұрын

This is the most brutal way I have ever seen. But it works. Only the way without tools. Not bad.

@ProjectHomeGrown 2 жыл бұрын

My father would turn around in his grave if he saw me do this😅

@terrencedludlu8370 Жыл бұрын

It worked. 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾 🤝🏽thank you my bro

@roshco477 Жыл бұрын

Just had the same problem, stuck disc nut. Before trying this method I threw some heat at it with the blow torch and it came off using the nut tool and a pipe for leverage.

@Belnivista_edt Жыл бұрын

I had this problem this morning, resolved it by using a thick peice of timber with two 10cm punches drilled into it so it sticks out about 1cm on top. First q20'ed the living daylights out of it, and just slight elbow grease and open. Really didn't want to sacrifice the blade that was in it as it was literally a brand new wood cutting blade. Plus i dont have another angle grinder

@PemadamGergasi Жыл бұрын

The locking machanisme of a grinder should be improved.

@gumacanian4211 Жыл бұрын

Thanks..worked good!

@songsabai3794 Жыл бұрын

So what if the blade is a metal wood cutter?...I'm having a hell of a time getting mine off.

@terrencedludlu8370 Жыл бұрын

That is exactly what I'm going through right now 😒 I will let you know how it's going in a bit.

@terrencedludlu8370 Жыл бұрын

It worked 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾 🤝🏽thank you my bro Finally!! 😎

@ProjectHomeGrown 7 ай бұрын

Not the ideal solution but if your in a pinch it wil get the job done

@SVMSICE 2 жыл бұрын

Good idea!

@ProjectHomeGrown 2 жыл бұрын

Thank you! Cheers!

@markwhite2207 Жыл бұрын

If I'm doubt, give it a clout.

@ProjectHomeGrown 7 ай бұрын

a Little violance with some dissapline wil get one far :D

@bonsummers2657 2 жыл бұрын

Wrong. Use a curved channel-lock-wrench to unscrew it. Press the button in, put the angle grinder on a surface the blade can 'grab' such as on carpet, and leverage your foot on the angle grinder, with the blade pushing into the carpet on the ground.. Lefty-Loosey-unscrew the nut with the Channel-lock-wrench with all your strength. It may be best to first spray on penetrating lubricant, then do the unscrew.

@Jonathan-jo2xu 10 ай бұрын

I put a breaker bar on the key, just a piece of 3/4" rigid pipe. It made light work of it. And by "light work of it"I mean it broke the lock inside and the blade is still stuck 🫤