How To REMOVE Swirl Marks & SCRATCHES in PAINT.

No video

How To REMOVE Swirl Marks & SCRATCHES in PAINT.

Рет қаралды 68,081

Күн бұрын

This video will show you how to remove swirl marks and scratches in your clear coat. This is by far the best method we have ever found for dealing with these types of paint issues.
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
If you would like to help us out.
www.paypal.me/...
***********************************************
Ceramic Coating We Use goo.gl/z9TrgR
and amzn.to/3aE87ux
TOOLS USED IN VIDEO
---------------------------------------------------------
Swirl and Scratch Remover amzn.to/2xaRqJn
Clay Bar System amzn.to/2Y6Sj0M
Best Microfiber Towels amzn.to/2yP98Cw
Luster Lube amzn.to/2y0bU87
Gloves amzn.to/3acMd27
****The small compensation we receive from these amazon links helps to keep our channel available to you all for FREE ****
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZfaq channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

Пікірлер: 104

@SweetProjectCars 4 жыл бұрын

Hello, to all of our great Subscribers we would love to thank ***Scot Egensperger and Kerry Rodgers*** for donating to our Channel via our PayPal link.***so, do you think Hoolio should car for his car a bit more? Let us know so we can get him to make it look pretty again.*** We challenge you to try this process to remove all your clear coat scratches and swirls marks we believe you will be blown away.

@swm122758 4 жыл бұрын

Thanks for the great tip and the explicit instructions for final finish detail! Looks great!

@sun9912 3 жыл бұрын

Pimp his ride

@ec6933 4 жыл бұрын

I just came back to let you know I got the black stuff for my jeep hood that I ruined and haven't been able to fix for 4 years by trying to wet sand it and it looks almost new!!! Like liquid black!!! I've tried so many things and still can't believe it when I look at it!! Thank you so much!!!!!!! This stuff is incredible!!!

@SweetProjectCars 3 жыл бұрын

Awesome, E C!!! Thank you so much for sharing, we truly appreciate it! Have a great day my friend. mad Mike the hammer SPC

@joewillis4031 4 жыл бұрын

Another great tip from the GURU OF CAR PROJECTS...I also used the Hyper Cleanse since it worked so good on my car...I thought it has to be good to clean the door on an old refrigerator door that was dirty...it just shined like nobody'[s business... great product for car and other things. Thanks for all your videos

@SweetProjectCars 3 жыл бұрын

Thanks for sharing Joe! We really do appreciate all of our great subscribers like yourself. Have a fantastic day my friend. mad Mike the hammer SPC

@kylemlm 4 жыл бұрын

Mike, Thank you very much sharing your secrets Sir. Stay Safe & Healthy.

@SweetProjectCars 3 жыл бұрын

Glad to help Kyle! Thanks my friend. Have a great day. mad Mike the hammer SPC

@tardeliesmagic 4 жыл бұрын

I've never used clay bar as the garages in the UK are too tight.Wax it again in a month and it'll be amazing (even if you don't use ceramic coating).It's time consuming but well worth the effort and it'll transform the whole car on a different level.I've been doing this for like 20 yrs and this is another great video.

@SweetProjectCars 3 жыл бұрын

Thanks so much for your comment my friend! Have a fantastic day. mad Mike the hammer SPC

@n3ro209 4 жыл бұрын

Looks good. Although I would rather stick with my random orbital DA polisher with 5” foam pads and my preferred compound/polish. Thanks for sharing a different way for people that don’t have machines.

@SweetProjectCars 4 жыл бұрын

Thank you for sharing my friend we appreciate that have a great day Mike Sweet project cars

@garylawson5230 2 жыл бұрын

Hi. What can I use to get scratches out of shiny alloy wheels

@SweetProjectCars 2 жыл бұрын

We have all these videos on that subject, but it all depends on how deep the scratches are, watch all of these and you will become a wheel polishing professional, Gary. kzfaq.info/get/bejne/nd6fqMx_vZ6ufWQ.html kzfaq.info/get/bejne/f6qffNOp38CyoaM.html kzfaq.info/get/bejne/odFoiMV4z9Xcj2Q.html Thanks. mad Mike the hammer SPC

@rh8611 4 жыл бұрын

Great job. Will give it a try. I usually buff to get swirls out.

@SweetProjectCars 4 жыл бұрын

Robert you will love the results of my friend thanks for sharing Mike Sweet project cars

@DroneWolfMedia 4 жыл бұрын

Excellent video. Thanks for the reminder, my car needs it bad. Gonna make it an all day project tomorrow. 👍

@SweetProjectCars 3 жыл бұрын

Glad it helped! Thanks for being here with us and for your great comment. Have a fantastic day my friend. mad Mike the hammer SPC

@TheSwitzAutomotive 4 жыл бұрын

Mike thanks for the referral to Kerry and Armor Shield. Got a bottle for $30 (great deal). This stuff seems equal to C-Quartz. Thanks man!

@SweetProjectCars 3 жыл бұрын

Thank you Switz! We appreciate your comment buddy. Have a great day my friend. mad Mike the hammer SpC

@SpitSharp 4 жыл бұрын

Very helpful and very generous of you.

@SweetProjectCars 3 жыл бұрын

Glad it was helpful! Thanks so much bobber! Have a fantastic day my friend. mad Mike the hammer SPC

@randalmorris2076 4 жыл бұрын

Great video! Question: I have a white truck (F-150) and I would like to know an easy but good way to remove tar from the rear wheel wells. Any ideas?

@SweetProjectCars 3 жыл бұрын

Watch this Randal kzfaq.info/get/bejne/pN5jdtlzxsWzmJs.html Sorry for the delayed response my friend. Have a fantastic day. mad Mike the hammer SPC

@TrojanHorse1959 4 жыл бұрын

Great video and paint care tips, thank you!

@SweetProjectCars 3 жыл бұрын

Thanks for watching Robert! Glad to help my friend. Have a great day. mad Mike the hammer SpC

@Gearhead-en8dz 4 жыл бұрын

Hey Mike. So I removed some decals from my Silverado and I can still see the outlines. Almost like just a little decal was left behind. Any suggestions, chemicals, etc....

@SweetProjectCars 3 жыл бұрын

If there is still adhesive left use this amzn.to/3hsXZbJ to clean the area . Then use this amzn.to/2POiaVT whether there was adhesive left or not it will remove all traces. Sorry for our delayed response my friend. Have a great day. mad Mike the hammer SPC

@willyck948 4 жыл бұрын

cool stuff wish I had a car with intact paint. Will be repainted deluxe 2 tone 95 Chevy k1500 extended cab hopefully this year who knows👍

@SweetProjectCars 4 жыл бұрын

That sounds like a good plan Willy hope it goes well for you my friend thanks Mike sweet project cars

@huckleberry6781 4 жыл бұрын

I love your videos sir. Keep up the great work 👍

@SweetProjectCars 4 жыл бұрын

Thank you huckleberry we truly appreciate that Mike Sweet project cars

@peterjurenovskis5933 4 жыл бұрын

Better than your tried and tested Mother’s? What’s the value difference (how many cars per jar of Mother’s compared to this product?)? Thanks for bringing this to our attention!

@SweetProjectCars 4 жыл бұрын

Peter this is the best we have ever found this doesn’t mean that something else won’t come along later as there are many products out there for paint restoration the competition is huge new products are coming out almost weekly we are always looking to better ourselves so that we can share that with great people like you have an awesome day Mike sweet project cars

@Nico_335i_DCT 4 жыл бұрын

Thanks Mike. I will do this to my 27 yo BMW e36, if I can buy it here in Europe. Dutch regards, Nico.

@SweetProjectCars 4 жыл бұрын

Thank you Nico great to see you have an awesome day my friend Mike Sweet project cars

@ChevyCitation 4 жыл бұрын

Hey Guys And Gals Sweeeet Swirl Free Cars Here ✨ 🚗 ✨

@SweetProjectCars 4 жыл бұрын

You got that right Chevy

@motorman857 4 жыл бұрын

Is this better than the Mothers mag wheel polish you've recommended in the past?

@SweetProjectCars 3 жыл бұрын

Mothers does not remove swirl marks, this amzn.to/2xaRqJn is the only product we have found that will. Thanks for your question. Sorry for the delayed response. Have a great day. mad Mike the hammer SPC

@curvyessentials 4 жыл бұрын

Yes, please, his car needs it. 😂

@SweetProjectCars 4 жыл бұрын

OK we will let him know he needs to get his act together LOL

@joeyc8458 3 жыл бұрын

Mike. Thank you buddy. Have you tried this on the door pillars that tend to always have swirls on them?

@SweetProjectCars 3 жыл бұрын

Hello Joey, we use this amzn.to/2xaRqJn no matter where the swirls are on the car. You will love the results. Thanks for asking. Have a great day. mad Mike the hammer SPC

@davidzicch2820 4 жыл бұрын

Thank You for the informative and helpful content, greatly appreciated it. If a car is washed and clay bar used. Can the swirl remover be used the very next day? Or would the car need to be washed again and or clay bar used again before swirl remover is used?

@SweetProjectCars 4 жыл бұрын

David, the next day will not hurt you whatsoever! Thanks for the question! Have a great day & thanks for being here with us! mad Mike SPC

@wileycoyoteevilgenius1172 4 жыл бұрын

Great video thanks

@SweetProjectCars 4 жыл бұрын

Thank you very much Wiley coyote evil genious We truly appreciate that Mike Sweet project cars

@user-vj4ol8ik9i Жыл бұрын

Where do you get these products?

@SweetProjectCars Жыл бұрын

Here's one of the products used amzn.to/2xaRqJn and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

@mkensinger2482 4 жыл бұрын

Hey Mike, what do you recommend to remove hard water spots (besides not letting it happen in the first place)? Wife's car gets hit by the sprinklers and it sat in the hot sun all day long. I tried scratch remover (nu finish) and it did help, but still there. I looked at all your videos, but didn't see one for hard water spots specifically. Please keep up the good work! I really appreciate all you share with us!

@SweetProjectCars 4 жыл бұрын

Use this amzn.to/2POiaVT with these amzn.to/3ajtpPq and I think you will see those water spots go bye bye. Thanks for the question have a great day my friend. mad Mike the hammer SPC

@mkensinger2482 4 жыл бұрын

@@SweetProjectCars Thank you very much Mike! Greatly appreciate the tips! My Best, Michael

@ShowMeWhatINeedToKnow 4 жыл бұрын

OMGGGGG!!!! So sweet!!

@SweetProjectCars 3 жыл бұрын

Thanks! Glad you liked it. Have a great day my friend. mad Mike the hammer SPC

@ScotWalt858 4 жыл бұрын

Very nice!!

@SweetProjectCars 3 жыл бұрын

Thank you! Cheers Scott! Have a great day my friend. mad Mike the hammer SPC

@xhole7 Жыл бұрын

Hello, what polish did you use? i can't find it

@SweetProjectCars Жыл бұрын

It's this amzn.to/2xaRqJn and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching xhole, Happy New Year. mad Mike the hammer SPC

@xhole7 Жыл бұрын

@@SweetProjectCars hi, isn't this for glass scratches? it seems different from the polisher in the video. And thanks, Happy New Year to you too!

@gregkeller80 10 ай бұрын

Hoolio’s hooptie!

@SweetProjectCars 10 ай бұрын

LOL, it is Greg!! Thanks for watching and commenting, it's always a pleasure, have a great weekend my friend. mad Mike

@ovalman 4 жыл бұрын

I just bought the swirl remover using your link..... I wonder how it will work with a DA?

@SweetProjectCars 4 жыл бұрын

We do it by hand as a final finish before we do a hand wax but you can try it with the DA see if you like the results

@BillyRogan 4 жыл бұрын

Hi there. Would you then add the color crush after this, and then wax? Or wax and then color crush for shine? Thank you

@SweetProjectCars 4 жыл бұрын

Color crush should be all you need, but you can wax afterward if you want. Thanks, mad Mike the hammer SPC

@BillyRogan 4 жыл бұрын

Sweet Project Cars right on! Thank you!

@billwaplington8700 4 жыл бұрын

I've always loved your videos. You have so many I've lost the 1 need to see again. When you fixed a rust spot. To prep and paint again you treated the spot with something to prevent the spot from breaking out again and I can't for the life of find the video or remember what you used. Can you help me? You sad you must do this to the metal before you prime

@SweetProjectCars 4 жыл бұрын

I will do what I can to find the link and send it to you thanks mad Mike sweet project cars

@billwaplington8700 4 жыл бұрын

@@SweetProjectCars was something like galvanised primer.

@jkubys 4 жыл бұрын

So now which do you prefer......................Mother's mag polish or this stuff?

@SweetProjectCars 3 жыл бұрын

We always use Mothers first, then we use this amzn.to/2xaRqJn as they are 2 totally different animals. Thanks for asking. Have a great day. mad Mike the hammer SPC

@briancwir1036 4 жыл бұрын

Isn’t your old way of using Mother’s and an electric polisher much better and way faster than this?

@SweetProjectCars 3 жыл бұрын

Mothers does not remove swirl marks, this amzn.to/2xaRqJn is the only product we have found that will. Thanks Brian. Sorry for the delayed response. Have a great day. mad Mike the hammer SPC

@RomboutVersluijs 3 жыл бұрын

What was that black bottle because ei don't see it in the description. I do see the names of the other products

@RomboutVersluijs 3 жыл бұрын

Was it the ceric slam perhaps?

@RomboutVersluijs 3 жыл бұрын

I found it, I was viewing it on mobile and simply scrolled over its ultimate swirl and scratxh remover. Now I just need to find that stuff

@SweetProjectCars 3 жыл бұрын

Glad you found it my friend. Thanks for watching and being here with us, we really appreciate it! Have a fantastic day. mad Mike the hammer SPC

@davidjanssen894 4 жыл бұрын

How much better is this than good old meguiars compund?

@SweetProjectCars 4 жыл бұрын

David hands-down this is the best we have ever found this doesn’t mean there might be something better coming down the road as there is a huge amount of competition in paint work restoration products have a great day thank you for sharing Mike sweet project cars

@chefgromano5025 4 жыл бұрын

Is there a way to fix clearcoat fracturing? I can’t find anything on it. Looks like tiny scratches.

@SweetProjectCars 4 жыл бұрын

Yes and they call it crazing as well most of the time it needs to be wet sanded out it’s not a real fun process you can wet sand it out and re-clearcoat it thanks for asking have a great night Mike Sweet project cars

@ik_8888 Жыл бұрын

Hello Brother 👋 can we do it after 4 to 6 months will it damage the paint actually i have Black so swirls look very bad ?? Kindly Reply ?? Lots Of love From pakistan 🤍 Always Stay Bless 😇

@SweetProjectCars Жыл бұрын

There's no waiting period, you can do this anytime. Welcome from Pakistan, we really appreciate the view and question, have a great day my friend. mad Mike the hammer SPC

@ik_8888 Жыл бұрын

@@SweetProjectCars Thanks 😊.

@joemilton7552 4 жыл бұрын

Sweet!!

@SweetProjectCars 3 жыл бұрын

Thank you very much Joe! Glad to have you here my friend. Have a great day. mad Mike the hammer SPC

@chrisfields6208 4 жыл бұрын

Thank you for the sweeet info. Can I place ceramic coating on the swirl remover? Thanks for your time.

@SweetProjectCars 4 жыл бұрын

Once your swirl marks are gone then you would ceramic coat per our videos with no issues whatsoever Thank you for asking my friend have a great day Mike Sweet project cars