How To Remove the Fender on your Gbody

Рет қаралды 45,171

Күн бұрын

FACEBOOK GROUP! CLASSIC GBODY GARAGE
/ 1468460740084238
INSTAGRAM PAGE! CLASSIC GBODY GARAGE
/ classicgbodygarage
GBODY HOW TO PLAYLIST • G-Body How To
HEADER PANEL REMOVAL HOW TO
• How to Remove a Header...
CLASSIC G-BODY GARAGE is your official Automotive G-Spot for ALL 78-88 G-Body cars including: Cutlass, Malibu, El Camino, Caballero, Grand Prix, Regal, Monte Carlo and Bonneville. Whether your a G-Body owner or want to own, have questions or problems with your G-Body, this is your outlet! Enjoy this group as you enjoy your G-Body!

Пікірлер: 147

@ClassicGBodyGarage 7 жыл бұрын

Follow Classic Gbody Garage for the latest project updates! Thanks everyone! Subscribe: kzfaq.info FaceBook: facebook.com/groups/classicgbodygarage/ Instagram: instagram.com/classicgbodygarage/

@nocanigdown 6 жыл бұрын

Classic G-Body Garage How to get power to heater blower

@jesusalvarez4435 5 жыл бұрын

Classi G-Body Garage hey bro do you have to jack the car up to remove the front clip?

@LuisGonzalez-ii1ix 7 жыл бұрын

Awesome! For G-Body Gear heads. I have an 84 El Camino restore project. I wanna thank you for all the time you save us Gear heads.

@DocterGordon 7 жыл бұрын

so glad I found this channel, thanks for all your videos dude.

@Steveeoaktree41 7 жыл бұрын

Thanks again Brian. I reckon that will make it much easier to do my door hinge rebuild with the fender out of the way... Can't wait to see the Moon roof Cutlass finished!

@djhaloeight 8 жыл бұрын

Nice video. Glad you got how-to's like this posted, will come in handy when I get around to tearing apart my '88 Cutlass Supreme Classic for paint and restoration.

@ClassicGBodyGarage 8 жыл бұрын

Thanks. Glad they will help you out.

@edgardelacruz156 7 жыл бұрын

Hey thanks for all the videos , very helpful .

@kylecobb6964 4 жыл бұрын

Really appreciate the work you do keep up the good work

@ClassicGBodyGarage 4 жыл бұрын

Much appreciated

@khrisschools8340 5 жыл бұрын

Great job on this how to video I’m going to attempt my fender in a couple of days !

@ClassicGBodyGarage 5 жыл бұрын

Awesome!

@bigstud98 Жыл бұрын

U did great explaining!!

@ClassicGBodyGarage Жыл бұрын

Thank you!

@joelstapleton2802 7 жыл бұрын

Thanks from a fellow G body guy. Been looking around for how to's since I am starting to take all the good parts off my 87 Montecarlo. Sadly an SS taken off the streets permanently by rust but with every intention of saving every part I can for use on another or someone who needs one of those parts.

@joedirt7091 7 жыл бұрын

Joel Stapleton Which parts of your 87 monte carlo are rusty?

@jonsworld5307 8 жыл бұрын

I love the how to videos keep them coming bub

@ClassicGBodyGarage 8 жыл бұрын

I plan to. Thanks for watching.

@thedriver02 8 жыл бұрын

excellent how to!

@ClassicGBodyGarage 8 жыл бұрын

Thanks!

@22Dropinthebucket 8 жыл бұрын

Thankyou @Levi

@epicawesomezebra 8 жыл бұрын

and another walk around of ur garage would be sweet !

@ClassicGBodyGarage 8 жыл бұрын

I may do a video on that.

@ericchavez6053 5 жыл бұрын

Thank you so much! Helped heaps! Do you have a video for removing the A frame?

@ClassicGBodyGarage 5 жыл бұрын

No frame work yet....Thanks for watching

@oreotcat 7 жыл бұрын

Hey Brian! Do you have a video showing how to replace the power antenna? I have an 87 Cutlass Salon and I brought it to the dealer and they like wanted to tear my whole car apart. I've found instructions that say how to do it but a video would be helpful. Thank you!

@zxBiiOHaZaRDxz 8 жыл бұрын

Fantastic video Brian. wish this was up a month ago before I went to take mine off to remove the AC box in my '78 Lemans. Ended up creasing the fender with the door extremely badly when I fastened it back on and opened the door. Now I can't get my door open and need to find someone with a spoon. Also neglected the shims and let them fall everywhere so it's a big mess.

@ClassicGBodyGarage 8 жыл бұрын

That sucks. Hope you get things straightened back out.

@fooledman 6 жыл бұрын

Had to replace the whole front clip for my 87 some years back. Still need a passenger side headlight bezel and bumper mounted turn signal.

@ClassicGBodyGarage 6 жыл бұрын

I have those parts. email me classicgbodygarage@gmail.com Thanks for watching!

@savagefire9554 7 жыл бұрын

cool any tips on replacing the floor pan

@skninjalotus5849 2 жыл бұрын

Just found your video. I think this might be a step in the right direction I need. I've got a 78 Caprice wagon that sits lower then normal ("3 clearance). My front tires rub horribly when I turn, so I'm trying to figure out the best way to fix my problem without having to switch out my front tires for smaller ones.

@ClassicGBodyGarage 2 жыл бұрын

Tires too large.

@diamondscloudznizcream9839 7 жыл бұрын

Thanks for responding, can you do a video on motorremoval

@ClassicGBodyGarage 7 жыл бұрын

Yep I will this summer.

@smokebeast 7 жыл бұрын

Thanks so much for the help! I'm replacing the vacuum hoses on my '87 Turbo Regal, assuming I have to remove the fender to reach the vacuum lines that go back for the HVAC?

@ClassicGBodyGarage 7 жыл бұрын

Yep they run behind the fender under the AC box.

@davidanscomb2034 3 жыл бұрын

Hi Brian, I’m restoring a 88 cutlass supreme classic. I am getting ready to take the front header panel and fenders off but do I need to to do a frame off or can I leave them on

@kingrobc1200 7 жыл бұрын

I have a 1980 cutlass supreme and it got hit on the driver side now I know I can replace the door but the body is damaged as well how do I repair that

@YODAMAN5 3 жыл бұрын

HOW ABOUT SAME THING ON 1981 OLDS 88 REGENCEY, GOOD JOB.

@gbapexoctanejr1626 4 жыл бұрын

Hey boss suggestion can you put back on the driver side g body door for thee 84 Oldsmobile cutlass supreme

@ClassicGBodyGarage 4 жыл бұрын

Use a floor jack with a long board and 2 people. Bolt it up.

@tyguy8927 6 жыл бұрын

Hey have you guys done a video regarding replacing the power antenna motor? If not could you?? Much thanks in advance!

@ClassicGBodyGarage 6 жыл бұрын

I plan to make one this year.

@bnlbrizzle 2 жыл бұрын

Can u PLEASE make a video about installing the chrome back onto a Buick Regal? The chrome that goes onto the lower door, fender, and quarter panel. I had mine painted and I have all new plastic clips for my chrome but I dont want to screw up my paint putting it on. I didnt take it off so I'm not sure how it goes back on.

@ClassicGBodyGarage 2 жыл бұрын

I would join Classic Gbody Garage on Facebook and ask there. Might have some people that can show you how it goes because I don't have a Regal that has any of its chrome removed.

@lynnepearce1336 2 ай бұрын

Hi, is this similar to 79 Cadillac DeVille? Thanks

@epicawesomezebra 8 жыл бұрын

can u possibly do a how to install bumper filler in the future?

@ClassicGBodyGarage 8 жыл бұрын

For what vehicle? Check out my header panel removal because I remove the bumper cover and that may help you out.

@hapirish2906 5 жыл бұрын

Any way you can show how the heater control valve vacuum line should be hooked up? Trying to get my heat to work on my 87 Olds 442. Thanks

@ClassicGBodyGarage 5 жыл бұрын

Yep i will do a video on this. Common question.

@MrChops442 3 жыл бұрын

Can you please make a video with instructions on how to remove the passenger side inner fender well on a G Body cutlass?

@ClassicGBodyGarage 3 жыл бұрын

Unbolt it and pull it out with the wheel removed. There are a lot of bolts tho so you cant miss any.

@keemmadeit9412 6 жыл бұрын

I have a 84 Grand Prix can you make a video on how to remove the power antenna .thanks

@ClassicGBodyGarage 6 жыл бұрын

You have to remove the inner well. It then bolts to the inside of the fender.

@davidlehman8809 7 жыл бұрын

purchased 85 el camino roller no motor, trans, or inner fenders, and donot see where the front struts are located

@rcairforceone 7 жыл бұрын

Thanks for the guide. Working on a 81 Cutlass Supreme with 36k original miles. I want to put the 'euro' header panel on it. Got any extra laying around??

@ClassicGBodyGarage 7 жыл бұрын

I sold all of my Euro's

@marzgtp 7 жыл бұрын

hay brian, I need the engine harness the one that's under the booster. can you please help me out.

@ClassicGBodyGarage 7 жыл бұрын

No problem. Please email me classicgbodygarage@gmail.com

@jonathancastelan2204 5 жыл бұрын

Any videos of how to remove/replace doors ?

@ClassicGBodyGarage 5 жыл бұрын

Nothing on that but there will be

@tristinhample 6 жыл бұрын

Do a how to remove a rear end I have a 1987 Grand Prix and will be doing it soon

@ClassicGBodyGarage 6 жыл бұрын

4 bolts on the trailing arms, 4 bolts that hold the drive shaft loops, ebrake cables and brake line.

@Lm701 Жыл бұрын

I have a 1995 buick century. An A-Body I think. Can't find anything on fender removal for it. How similar would it be to this?

@ClassicGBodyGarage Жыл бұрын

I have never worked on one.

@xxbigboy559xx3 5 жыл бұрын

I have an 83 Buick regal 4.1 I'm not getting any spark to the plugs replaced wires spark plugs and ignition coil

@ClassicGBodyGarage 5 жыл бұрын

Check the pick up module. Check power going to the cap, its the large pink wire.

@viclial60 8 жыл бұрын

Do You Have a video to remove/install a power antenna on a 87 olds 442???

@ClassicGBodyGarage 8 жыл бұрын

I don't but you must remove the inner fender well to gain access.

@84sheepdog56 8 жыл бұрын

Hello, would you be willing to talk more about the 350 with an olds crank that makes 440ci.

@ClassicGBodyGarage 8 жыл бұрын

I can do a video on this yes.

@84sheepdog56 8 жыл бұрын

thanks, it would be cool to get part numbers,specs, where you might find a 350 DX, thanks a ton.

@rickvelez6492 2 жыл бұрын

Do you have video to reinstall fender

@ClassicGBodyGarage 2 жыл бұрын

Do not but its just the reverse of removing the fender. Just make sure you have the proper shims to gap the it correctly.

@deezsquuezeorg 4 жыл бұрын

What happens if you lose your shims? How do you get it back to perfect?

@ClassicGBodyGarage 4 жыл бұрын

You buy new shims because they are needed to take up the slack.

@markfrank49 8 жыл бұрын

I have a 84 cutlass supreme my temp Guage isn't working in have changed the sender and traced the wiring I'm at a loss with this any ideas

@ClassicGBodyGarage 8 жыл бұрын

check my rally gauge fix video in the gbody how to playlist. I show how to fix the common issues with them and the temp gauge is part of the fix.

@frederickbrown7002 4 жыл бұрын

Do you have an euro header panel for a cutlass

@ClassicGBodyGarage 4 жыл бұрын

Do not

@ogonzalez602og 5 жыл бұрын

so do I put the old shims on with new fender or the new shims with new fender?

@ClassicGBodyGarage 5 жыл бұрын

Every car and part is different so shim as needed.

@martabus1 6 жыл бұрын

Do you have a set of 14 or 15 inch chrome cutlass rally’s for sale?

@ClassicGBodyGarage 6 жыл бұрын

I don't

@diamondscloudznizcream9839 7 жыл бұрын

steering wheel removal for ignition cylinder?

@ClassicGBodyGarage 7 жыл бұрын

I need to do a video on that.

@yungnthugng5004 6 жыл бұрын

do u got a passenger side fender header panel n hood for sale for a 85 cutlass supreme?...

@ClassicGBodyGarage 6 жыл бұрын

do not

@tylerhall2544 Жыл бұрын

I'm trying to find out to remove rear fender

@ClassicGBodyGarage Жыл бұрын

Welded on.

@isaiasduran1 6 жыл бұрын

How I can replace the antenna from 1984 olds cutlas supreme?

@ClassicGBodyGarage 6 жыл бұрын

Remove the passenger side inner well and its bolted to the inside of the fender

@SalemMillion 8 жыл бұрын

You keep mentioning 78-88 G body cars and my Chevy Caprice is 89, Would your videos still help me with my 1989 ?

@ClassicGBodyGarage 8 жыл бұрын

A Caprice is a B-Body and there are many differences. The fender on a B-Body might have similar bolting points.

@yungnthugng5004 6 жыл бұрын

I also got a 79 cutlass supreme wud that fender fit my 85

@ClassicGBodyGarage 6 жыл бұрын

@kendalemcafee1306 4 жыл бұрын

How do you remove and install the chrome trim that's around the bottom of the car

@ClassicGBodyGarage 4 жыл бұрын

Clips and screws.

@kendalemcafee1306 4 жыл бұрын

@@ClassicGBodyGarage first let me say thank you in advance you rock bro keep doing your thing I'm a big supporter and do you have a video or a how to anywhere

@charlesweimer4681 5 ай бұрын

how do u Install power antenna?

@ClassicGBodyGarage 4 ай бұрын

Remove the inner well.

@G_marvelous85 4 жыл бұрын

Do you have any euro header panels for sale?

@ClassicGBodyGarage 4 жыл бұрын

Do not

@dandrecoleman7976 5 жыл бұрын

Do I need to take that off to replace the antana?

@ClassicGBodyGarage 5 жыл бұрын

Remove the inner well

@seventhirty7308 2 жыл бұрын

do you need to remove the header panel in order to remove the fender?

@ClassicGBodyGarage 2 жыл бұрын

Yes

@markgeary1591 6 жыл бұрын

How do you line up the doors

@ClassicGBodyGarage 6 жыл бұрын

From the hinges. They slide. Thanks for watching!

@paulwoods1825 7 жыл бұрын

Brian how do you change the horns on a 84 GP?

@ClassicGBodyGarage 7 жыл бұрын

Paul Woods they are located inside the drivers fender and easily unbolt and pull out from under the hood.

@paulwoods1825 7 жыл бұрын

Thanks Brian I saw them there but wasn't sure if they were able to be pulled out that triangle opening in the inner fender

@qmays34 6 жыл бұрын

If I remove the heater box how can I still have heat in my car could you please explain that or show me how to do that

@ClassicGBodyGarage 6 жыл бұрын

You need a NON AC box that has heat only. Non AC optioned cars.

@qmays34 6 жыл бұрын

Classic G-Body Garage where do I get that

@ClassicGBodyGarage 6 жыл бұрын

Hunt one down on ebay or through the Classic Gbody Garage Facebook group. It's not an easy swap.

@jobanyrojas1176 8 жыл бұрын

were can i buy a euro front end? for my 84?

@ClassicGBodyGarage 8 жыл бұрын

FaceBook, Ebay, Craigslist. All over.

@anthonycummings7220 5 жыл бұрын

how do you remove the whole front end

@ClassicGBodyGarage 5 жыл бұрын

Remove all fender bolts on the back side near door and windshield, remove inner well bolt behind the front tire, remove each core support body mount bolts, remove wire harness, remove AC condensor, remove radiator, remove hood cable, remove any hoes attached to components on inner wells.

@kevindunson8946 Жыл бұрын

can you show without taking the plastic inner

@ClassicGBodyGarage Жыл бұрын

The plastic inner well comes with it. There is no way it stays in the car cuz its bolded to the fender.

@marzgtp 7 жыл бұрын

email set

@heavymetalandanime4life947 5 жыл бұрын

Will a 1985 monte carlo ls fender fit on a full SS?

@ClassicGBodyGarage 5 жыл бұрын

No the front fenders are in fact different. LS fenders have a different lower section on the front of them.

@heavymetalandanime4life947 5 жыл бұрын

Classic G-Body Garage thanks thought there might have been away around

@shreveportfinest3110 8 жыл бұрын

how to remove finder without finder well

@bighommiesam8788 4 жыл бұрын

How do I get to the 5 bolts in the door well

@jessebogard480 8 жыл бұрын

you still had a Hurst Olds black and gold and as for sale

@ClassicGBodyGarage 8 жыл бұрын

That was a long time ago.

@GBodyJames 8 жыл бұрын

do you use head and shoulders on that awesome hair?? haha

@ClassicGBodyGarage 8 жыл бұрын

LMAO!!!!

@GBodyJames 8 жыл бұрын

Classic G-Body Garage haha just buggin ya!! even though ive pretty much done everything you post i still watch all your vids haha i have a bunch of g body vids too!!!

@manueljohnson6301 2 ай бұрын

Braces

@possiblycrazy442 7 жыл бұрын

So the header panel can stay but the hood does need to come off?

@ClassicGBodyGarage 7 жыл бұрын

yes

@possiblycrazy442 7 жыл бұрын

Thank you for the reply. I ended up doing it already. I did it on a Regal, and from what I experienced it's pretty much mandatory to at least loosen a Regal style header panel. Mostly because of the way it slopes. Removal didn't require it because the fender was badly damaged, but installation of the replacement required some wiggle room. Helpful video! It gets some credit for helping me finish the car in time for my first-ever road course track night! Regards, A fellow Brian

@ClassicGBodyGarage 7 жыл бұрын

Awesome! Glad the video helped out. Every Gbody brand bolts up slightly different but this video is designed to get your off to a good start. See you in the next video!