FINALLY!! a great tutorial for removing the headliner, every other video sucks and nobody shows how to remove it... thank you for this video
@mr.bungle8690 Жыл бұрын
The man has made the Ford Ranger a hybrid Jeep I am officially doing this!
@songs97703 жыл бұрын
These ranger videos saved my life lol 😂 great content man
@rayregnogarage3 жыл бұрын
haha. nice
@terrysheedy6098 Жыл бұрын
Thank you! That is just the info that I needed. I was worried about what I was going to do after removing the headliner but now I feel good just leaving it out.
@rayregnogarage Жыл бұрын
It’s louder in there, but being able to use magnets to mount stuff to the ceiling is really cool.
@georgehickman40752 жыл бұрын
Thanks, very informative. You got to the point without any excess b.s.
@TheShafty3 жыл бұрын
Got a 96 Ranger project truck couple weeks ago and all these videos have helped alot! And my headliner is torn to absolute shit 😂
@rayregnogarage3 жыл бұрын
Congrats!!! Ya, they’re actually pretty easy to remove and reupholster... But I like the bare metal
@lorellehugostino9752 жыл бұрын
1:07 Your headliner looked pristine compared to what our '95 Ranger headliner looks like! IF I even remotely touch it, I'll have a layer of dust on my head, and God forbid I am looking up when I brush it because it will undoubtedly be in my eyes too! I think I'll need to place a tarp down over the seats and dash while simultaneously scrape vacuuming using the wet/dry vac, then get a leaf blower and blow the rest of the dust out before I can even begin removing anything! You've made it look as though it may be something I can handle, so thanks for the video!
@rayregnogarage2 жыл бұрын
Ooof... My allergies wouldn't let me let my headliner go that far. Mine was bad as it was. Much cleaner in there now.
@rayregnogarage2 жыл бұрын
Glad you found the video helpful!
@qpfj2 жыл бұрын
Thank you very much, you sure provide great help in producing this video; prosper well Ray.
@jordanhart9708 Жыл бұрын
This is helpful as I'm planning on putting sound/thermal insulation under the carpet and above the head liners.
@rayregnogarage Жыл бұрын
nice
@precious56632 жыл бұрын
Thank you! I'm planning to redo my headliner and you've shown me what I neede to know.👍👍👍
@Tsmace333 жыл бұрын
I pulled the carpet on my 96 4.0 xlt. Same color. I scraped out the wierd green insulation on the floor and did a black bed. I love it
@rayregnogarage3 жыл бұрын
very cool. you mean the sound deadening? i’ve seen people break that up using dry ice. it just cracks and comes off easy. haven’t tried it yet tho. very cool on the bed stuff. did you mean bed liner?
@Tsmace333 жыл бұрын
@@rayregnogarage yes a black bed line. Just rattle can rustoleum bed liner. And yes the sound dealing I just used a big flat head screw driver it flaked off with minimal effort.
@Tsmace333 жыл бұрын
I think you of all people would appreciate my ranger and the work I've done to it.
@bigbobby699 Жыл бұрын
Thanks never thought about that.
@frankthetank43153 жыл бұрын
I have a 1999 ford ranger that is my first car. We bought it for $150 because we knew the guy. My dad and I have put 3 1/2 grand into it because it’s has 168 thousand miles on salty Mid west roads and wasn’t taken care of. It had no shock left and is a piece of work. Now we will just put a new alternator in it and a new clutch this winter. (Your truck looks factory new underneath compared to mine.)
@rayregnogarage3 жыл бұрын
That’s awesome! And Ha yes I know I’m spoiled. Don’t need to deal with road salt in southern cal. My father in law who is from Minnesota was giving me a hard time about it the other day. 😂.
@scampalong4 ай бұрын
Helpful thanks!!
@AverageBuilds084 жыл бұрын
I love the videos man I just bought a 2001 ranger for 700$ and it’s awesome looking to get some wheels and tires soon!
@rayregnogarage4 жыл бұрын
nice!!
@joshuacarlin14273 жыл бұрын
Not to be a one upper but I just secured a 2004 Ranger for 450 lol. Clutch had air in the system and the guy just wanted to get rid of it instead of working on it.
@AbuBakar-Ironwood.2 жыл бұрын
Nice tips. Glad to diy my ford ranger this weekend. Thanks bro
@rayregnogarage2 жыл бұрын
have fun!
@MajorCaliber3 жыл бұрын
KUDOS--useful video! So glad my '99 Sport 4x4 came with the *rubber flooring* NOT carpet. Cleans easily, deadens noise, and still looks great 22 years later. My headliner is fine, EXCEPT the front edge, where using a folding sun-reflector in the windshield has left the thin fabric torn and hanging down. Was going to jury-rig it with some 3M spray adhesive, but after watching your vid, I'm just going to swap it out with a "virginal" one I found on a 2008 in the U-pick salvage yard. Got some of the fancy "2-way" combo sun visors out of an Explorer... will probably wire up the "makeup mirror" lights whilst I have the headliner out. AFAIK, ALL the Rangers, and all the Ranger-based Explorers ('91-2001), and even Sport-Tracs(?) only came in 2 interior/headliner colors--tan and gray--so you've got a great chance of finding a match.
@rayregnogarage3 жыл бұрын
Awesome!!! My 08 came with rubber floors it was very convenient.
@MajorCaliber3 жыл бұрын
@@rayregnogarage Wish I had your MANUAL transfer case shifter... long ago got tired of the electric shift and pulsed-vacuum hubs.
@rayregnogarage3 жыл бұрын
@@MajorCaliber It's pretty nice, but it isn't without its problems. My truck bumps out of 4HI. I think I need to tighten up some bushings or something on the shift linkage
@Nowhere4u2run4 жыл бұрын
Great videos man, I have 96' explorer that im using as a daily / overland vehicle. big help
@rayregnogarage4 жыл бұрын
Rad! Glad you found it helpful. I've been checking out 90-94 explorers for a while. I like the Ranger, but the Ex is just more practical for adventures.
@pedrodylan72893 жыл бұрын
dunno if anyone gives a shit but if you are bored like me during the covid times then you can stream pretty much all of the latest movies on instaflixxer. Been binge watching with my girlfriend lately xD
@reybenedict58983 жыл бұрын
@Pedro Dylan yup, been using InstaFlixxer for months myself :D
@tomkingdon2827 Жыл бұрын
Thanks for the great video. Yeah,the bear metal looks awesome. I think I'm going bto borrow this page out of your book of magic. Keep up the great work 👍
@jwalkerXx4 ай бұрын
Good video yo thanks for sharing
@colonelgraff91983 жыл бұрын
The “obscurely sized” bolts are 7/32” or 5.5 mm (pick your poison).
@rayregnogarage3 жыл бұрын
Yup that sounds about right!
@keviniski82542 жыл бұрын
Thanks, hitting up the salvage yard for one tomorrow. Took my headliner off years ago and couldn’t remember what tools to bring
@NK-ox9uo8 ай бұрын
Thank you! I really needed the help.
@jtx-tube2 жыл бұрын
Awesome job, i' think imma just pull the seats and clean the carpet and re-install seats. But the headliner, I may do like you did. Not sure yet. Thanks!
@rayregnogarage Жыл бұрын
Ya we pulled the seats and cleaned the carpet first. Did a video on that, too. But it was still gross. haha
@schlippery111 ай бұрын
Very helpful! Thanks for uploading :)
@derfwashere4110 Жыл бұрын
Thank you for the video bub
@mluna692 жыл бұрын
sweet, thank you. I also cut out the front of the carpet, now am going to remove the whole thing. Damn leaky Ranger
@rayregnogarage2 жыл бұрын
ya it's nicer without all the carpet. lol. way easier to clean, too. just pull the plug out of the floor and hose it down. lol
@mluna692 жыл бұрын
@@rayregnogarage thank you, ripped the carpet out the same day.. the carpet was naaaaasty.. the job wasn't bad.. truck still leaks but at least i a'int gotta worry about wet carpet and mold.
@rayregnogarage2 жыл бұрын
@@mluna69 nice!
@PhillyFixed2 жыл бұрын
Probably a 5.5mm socket for some of the trim stuff. Ford loved 5.5mm hex fasteners on the Rangers for no apparent reason ...
@rayregnogarage2 жыл бұрын
Ha that sounds about right. Didn’t have any half metric sizes tho. lol
@eudaenomic3 жыл бұрын
Rock years, Bucky's!
@fza.digital2 жыл бұрын
Thank you for the video! Saved me a lot of time!
@rayregnogarage2 жыл бұрын
Glad you found it helpful!
@jesusreyes17042 жыл бұрын
Nice truck great vid thanks!👍
@rayregnogarage2 жыл бұрын
Thanks!!!
@deancarr45073 жыл бұрын
These videos are awesome man, a huge help!
@rayregnogarage3 жыл бұрын
Awesome. Thanks!
@sonsonny10003 жыл бұрын
Does it get hot in the truck all the carpet and headliner work as insulation to keep noise and heat out of the vehicle so I would imagine head transfers easier into the cab I took of the trim of one of my doors and I feel the heat coming from the meat
@rayregnogarage3 жыл бұрын
I didn’t notice too much change in the noise. My truck is straight piped. It’s just loud. Heat...not really. the trans tunnel gets a little warm to the touch I guess, but I never reach down to touch it. I honestly didn’t notice much difference
@Shadowband723 жыл бұрын
My 2003 Ranger has a rubber floor instead of carpet , no magnet options but beats the hell out of stinky dirty carpet .
@rayregnogarage3 жыл бұрын
Ya. My 08 Ranger had rubber floor, too and I liked it. The magnet mounting is cool, but it is also a little annoying when my wife drops her humongous hydroflask in the truck or lets it roll around in the back. haha.
@805coastlife93 жыл бұрын
Great video
@rayregnogarage3 жыл бұрын
Thanks!
@joeythehomie58154 жыл бұрын
What are those rims?
@rayregnogarage4 жыл бұрын
American Racing Outlaw 2
@peterkeena8667 Жыл бұрын
Won't it be loud when it rains ?
@rayregnogarage Жыл бұрын
Louder. sure. but it doesn’t bother me
@kamraceclardy67772 жыл бұрын
Do you know of any options for a bench seat in this ranger? I have a 97
@rayregnogarage2 жыл бұрын
Both my 99 and 07 had 60/40 bench from the factory. I’m pretty sure the previous owner of my 95 put in bucket seats from an Explorer. The older generation came with a full bench but I’m not sure what modifications are needed to mount it.
@hunterjackman46343 жыл бұрын
What are your magnetic cupholders called? I'm wanting to buy 2 for myself for my truck!
@rayregnogarage3 жыл бұрын
Check out the description for the video. If you’re on your phone just click the title of the video and the description will pop down. All the tools and products I mention in the video are linked there.
@daltonremmert22314 жыл бұрын
What is the torque bit used for the rails can’t seem to get mine out
@rayregnogarage4 жыл бұрын
For the seat rails? They are 10mm
@howiefeltersnatch12363 жыл бұрын
I wish I never ripped the carpet out of my 94 4.0 ranger. Way too hot and much louder inside the cab.
@rayregnogarage3 жыл бұрын
Interesting. I didn’t notice much of a difference to be honest. I guess I just like my trucks loud. Lol
@filipschuster93963 жыл бұрын
In which country do you live? i was planing to do this in my ranger. But after this comment i am not so sure
@rayregnogarage3 жыл бұрын
@@filipschuster9396 USA.
@filipschuster93963 жыл бұрын
@@rayregnogarage Ok, Thanks for the answer ;D.
@sonsonny10003 жыл бұрын
@@filipschuster9396 don’t do it the carpet and headliner are insulation. They keep heat and noise out of the truck. I took off my trim from one door and it gets hot on the door
@JB-dl4ul3 жыл бұрын
Any chance were going to get a Cut and Turn video on the D35 TTB? Cant find any kind of video on KZfaq .
@rayregnogarage3 жыл бұрын
Do you mean actually doing the cut and turn on a set of beams? That's a bit above my skill level. I AM planning on buying some cut, turn and extended beams. I'll do an install vid on that for sure. Looking at Giant and Solo at the moment.
@JB-dl4ul3 жыл бұрын
Yeah, you should do it! From your videos, seems like you got some tools lying around, and you've done some welding right? Common, do it! LOL I was looking at those 2 shops also but staying stock width, but damn$$$$. I'm in WA also, I keep looking for someone selling their old beams and radius arms so I can do the CnT and extend the radius arms for my 94 Sport 5 speed. Just cant find any. Well, good luck. Keep us posted!
@rayregnogarage3 жыл бұрын
@@JB-dl4ul I'm not that brave. I'll build bumpers and shock mounts... but beams is next level.. haha. have tried your local Pull N Save?
@JB-dl4ul3 жыл бұрын
@@rayregnogarage Haven't looked around, but that does sound like a good idea.
@thhomy28683 жыл бұрын
Mine leaks somewhere, idk what to do
@thhomy28683 жыл бұрын
The back windshield with the sliding window, the headliner has water marks on it from where it leaks
@rayregnogarage3 жыл бұрын
Mine headliner had water marks, too. I found some rust in the top corner of the cab. Some sealant should help. They make special sealant for windshields and windows.
@dscableguy2 жыл бұрын
Where do you live? because if i try this it would start raining! LOL
@rayregnogarage2 жыл бұрын
Somewhere it doesn’t rain very often. lol
@philipandrew56432 жыл бұрын
Bullshit! You destroyed the shell of that headliner when you pulled it out!! Notice how his video goes right from the trim piece the pulling out the shell? "Just gently massage it out" he says! ...😂😂
@rayregnogarage2 жыл бұрын
It was water damaged already. Truck leaks in the corner. By that point I had already decided I wasn’t gonna put it back in. Do as I say, not as I do. 😂
@danieljones-fc1eu Жыл бұрын
You will Regret not putting Headliner back in. Condensation will form on roof and It Will Drip..
@rayregnogarage Жыл бұрын
False. 3 years later. No regrets. I love being able to mount things to the ceiling with magnets.