How to Remove the Heater Core on a Mustang

Рет қаралды 7,481

Жыл бұрын

This video covers the removal of the heater box from the 1964-1966 Mustang. There may be some similarities with the 1967 and newer cars.
The car is a 1966 Mustang Fastback with a factory V8 and T5 transmission.
Shot with GoPro Hero 9 with the Media Mod, edited on Davinci Resolve 17.
Credit for the music in the video:
::::::::::::::::::::
Epidemic Sound
Try it today! www.epidemicsound.com/referra...
::::::::::::::::::::
#krusebuilt
#kruseview
#Mustang
#1966
#fastback

Пікірлер: 48

@MK4PERFORMANCE Жыл бұрын

Just completed this rebuild on my 65. Great video and good luck on the rebuild!

@AndyKruseChannel Жыл бұрын

Awesome! Thank you!

@paulbruno8327 Жыл бұрын

Nothing like making an old car complete and correct! Kudos Andy! 🏆🏁

@AndyKruseChannel Жыл бұрын

Thanks! 👍

@SmackeysGarage Жыл бұрын

That isn't too bad of a project on your car. The 69 is a massive project with the dash pad needing to come out. Awesome video!

@mattcornett7180 Жыл бұрын

Yeah just did this on my 69. It was no fun. I loosened the dash and was able to get out… but not before dropping a ton of coolant on my new carpet. I put a trash bag over the carpet first which helped.

@AndyKruseChannel Жыл бұрын

Yeah, I think it will be pretty easy to refurbish this system, I just gotta stop spending money on other, more fun parts. :)

@CC_Top_Solutions Жыл бұрын

I did one in my girlfriend's 70 Cougar...that was tough. Then I did one in my '93 Vette...that recalibrated the meaning of the word tough! kzfaq.info/get/bejne/f7V4qNucyrnIpWQ.html

@PowerfulRoman Жыл бұрын

I was thinking of doing the same thing. Thanks for posting this video!

@AndyKruseChannel Жыл бұрын

No problem!

@billgoble6209 Жыл бұрын

Very helpful Andy. I hope your next video shows you rebuilding the box and replacing the core.

@AndyKruseChannel Жыл бұрын

Yes, I will be doing the rebuild, but it will be a bit. :)

@sergioacevedo2874 Жыл бұрын

I would recommend the Scott drake core so the heater hose pipes stick out through the firewall making hose replacement and servicing easier. Mine just burst for a second time with an aluminum core so I’m just going to take it out and get a block plate. I’m in CA so cold here is like 55 lol. Maybe in the future I’ll do vintage air but I’m good with just oem ac and no Heater lol.

@AndyKruseChannel Жыл бұрын

Yes, I used that core on my last Mustang, definitely easier to service with the longer tubes. :)

@stang3028 Жыл бұрын

great job bro

@AndyKruseChannel Жыл бұрын

Appreciate it

@Prestondlay Жыл бұрын

Just found your channel and absolutely love your videos as they are giving me the encouragement i need to get my father's old 1966 convertible mustang back on the road he bought all the way back in 1988. Quick question for you though. What wheel/tire size are you running?

@AndyKruseChannel Жыл бұрын

Thanks!! Wheels are American Racing - Torque Thrust II, size 16x7 w/ 5x4.5 bolt and 4 inch backspacing, part number VN2156765. The tires are Falken Azenis RT615K+, size 225/60/16, all four. :)

@Prestondlay Жыл бұрын

@@AndyKruseChannel thank you! Looking forward to your future videos

@ronaldlawrimore4838 Жыл бұрын

Question for you. What is blocking off the holes in your firewall were the ac hoses would go through. Could you post a picture of yours.

@AndyKruseChannel Жыл бұрын

This car does not have AC, nor are there factory holes for an AC system. The holes by the fan are for the heater lines going to the heater core.

@ronaldlawrimore4838 Жыл бұрын

Thanks. I guess the previous owner added the holes for an ac that was in the car when I bought it. I’ll try to get some body plugs to see if I can block them off until needed.

@Donny.C.wlWilliams Жыл бұрын

did mine on the cougar all the louvers inside rusted out looking into a oem complete replacement

@AndyKruseChannel Жыл бұрын

Sounds like an opportunity for an upgrade!

@sergioacevedo2874 Жыл бұрын

Two other pro tips on the rebuild is those plastic clamps from harbor freight are your friend when you have to put those box clips back in and potentially have to fiberglass fix the clip mounting points. Second pro tip is to let the glue on the foam gaskets dry a day or two. I was too eager to get it in and had glue shut my heater flaps closed and had to do some work getting those unstick. Then a couple months later the shitty aluminum core replacement blew on me. Now I bypassed it again and am just going to remove it and block off that hole.

@AndyKruseChannel Жыл бұрын

Thanks for the heads up. :)

@AlfsMustangGarage Жыл бұрын

Good work, should be nice to have some heat! It's getting cold out there.

@AndyKruseChannel Жыл бұрын

Thanks! Not sure I'll get it done fast enough, the cold weather is coming fast. :)

@AlfsMustangGarage Жыл бұрын

@@AndyKruseChannel that it is. We have snow here in Utah already.

@AndyKruseChannel Жыл бұрын

@@AlfsMustangGarage Yeah, it's snowing now. Ugh. :)

@LeeFred78 Жыл бұрын

Wow....still have the original cardboard-type heater plenum. Don't see those much anymore!

@AndyKruseChannel Жыл бұрын

Yeah, it's pretty bad, it's easy to see why people opt for the plastic units now. :)

@1965copester Жыл бұрын

I keep blowing my heater core. I found out I need to use a pressure reducer in the hose to keep that from happening. I have all the parts, I just have taken the time to do it yet. I spend too much time watching your videos waiting for the electric power steering. :-)

@AndyKruseChannel Жыл бұрын

Do you have a high pressure or high volume water pump? I wonder if that is causing the heater core to go?

@1965copester Жыл бұрын

@@AndyKruseChannel It should just be a stock pump. Not fun when you put your foot in it and it blows all over the inside of your car and covers you and the windows with steam. I just recently read about some of the fox body mustangs having the problem and solved it with a reducer. I hope it does.

@williamgreen1489 Жыл бұрын

Andy, have you thought of going with a Vintage Air or similar system? Your car isn't a concours show car and is made to drive. I've done this only my cars and it is so much better.

@AndyKruseChannel Жыл бұрын

I have, but it's pricey. It's on the list, but below other more fun items I want right now. :)

@petertremulis3835 Жыл бұрын

I did this on my 66' FB too. Not hard but awkward.

@AndyKruseChannel Жыл бұрын

I got lucky, cut hoses and missing screws make it really easy to pull this box out. :)

@saltysalt397 Ай бұрын

2:25 this bolt is a pain to remove. It’s a carriage bolt and the nut is rusted on so when I try to loosen it, the whole thing spins

@AndyKruseChannel Ай бұрын

It's these kinds of projects that keep us young. :)

@swooshdave Жыл бұрын

If you still have the coolant hoses connected and have coolant in the heater the best thing to do is to remove the hoses from the thermostat housing and water pump, let them drain out the best you can and plug the ends. Then when you pull the heater out from the inside of the car pull the hoses all the way through. Some people try to disconnect the hoses under the dash and it's a giant mess.

@AndyKruseChannel Жыл бұрын

Yes, I had that problem on my last Mustang. :)

@swooshdave Жыл бұрын

@@AndyKruseChannel Pretty sure I commented on that one too. 🙂

@sergioacevedo2874 Жыл бұрын

It’s actually pretty easy just put one hose to a bucket and the other put a air compressor or even just use your mouth to blow out the fluid.

@FaustKnight 3 ай бұрын

FYI my cardboard plenum was in pretty decent shape and sold for $250 on ebay within 45mins of listing it. If anyone has one that isnt torn to heck, don't toss em!

@AndyKruseChannel 3 ай бұрын

Agreed, quality original parts go pretty fast these days. 🙂

@FaustKnight 3 ай бұрын

@@AndyKruseChannel The old parts are financing a lot of my build haha. Even a decent shape original 2bbl with the tag still on it was worth $100. I see a lot of people just chuck the old parts and it hurts.