Shop Bumpers: realtruck.com/... In this video Todd shows you how to remove your bumper on a 2020 Ram 2500. Subscribe to our Channel: / realtruck Free shipping for orders over $100!
Пікірлер: 29
@gol10dr4511 ай бұрын
Do you need to remove the tow hooks to remove the bumper? Or was it because you changed out the bumper?
@thetriplew49112 жыл бұрын
Appreciate the help! But you forgot about the heater plug that's pinned to the bumper in a few spots.. Other than that, spot on!!
@thomaskirk35482 жыл бұрын
Thanks for video. My 2020 RAM 2500 Tradesman has an air dam at the top of the bumper that joins the lower radiator shroud. 4 plastic push pins that must be removed.
@Realtruck2 жыл бұрын
Glad it helped!
@giovanimartinez97279 ай бұрын
After long time suffering, it’s easier now haha thanks!!
@bobbyhogston6 ай бұрын
Is this the same procedure for a 2023 Ram 2500?
@mbray103 ай бұрын
Yes
@shawnbossert76765 ай бұрын
Do the tow hooks have to come out? I know you need to pull the front tow hook bolt.
@seangreene4311 Жыл бұрын
Is that truck stock height? What tires and size are you running?
@sandiegobashbrothers2 жыл бұрын
Great video, I have a 2021 ram 2500 power wagon and I bought the grumper 4400-1 bumper through your website. I’m having trouble removing the bumper with the winch. Do I have to remove the winch also?? Thanks
@sandiegobashbrothers2 жыл бұрын
I removed the winch. Removed the bumper. It doesn’t seem to work with the new grumper bumper though… any thoughts??
@Jason-fq5zh Жыл бұрын
Will a 2021 3500 be the same?
@michaelwalker2091 Жыл бұрын
If you are adding tow hooks, can you loosen the bottom 18mm, take the top 18mm bolts out and roll it forward enough to get the bottom grill changed out?
@wellarmedfarm7546 ай бұрын
I know this is an old comment. But maybe it will help others. Unless you have tiny tiny hands the answer is no. It is next to impossible to remove the lower grille without removing the bumper and then removing the bracketry behind the bumper.
@timf69163 жыл бұрын
Good information
@AddyOverbeeke2 жыл бұрын
Nice Job explaining the procedure. I have a question please....With the Tow Hook bolts torqued, is it from OEM to have the Tow Hooks to float a little in the tolerances of the boxed frame mount.....Mine are loose with bolts tight.... tightening more would start to deflect the box metal beam..... It this your understanding. Are your Tow Hooks somewhat loose?
@Dylan-tt3ic2 жыл бұрын
I just removed the bumper on a brand new truck. The tow hooks did not have any wiggle room
@Realtruck2 жыл бұрын
Hey Addy, it depends on the manufacturer of your bumper. The SteelCraft bumper I installed had a little wiggle room with the tow hooks when all was torqued.
@Financebyhorus2 жыл бұрын
There is no need to remove tow hooks if you just take the 18 mil bits at the front brackets .
@johnanderson602 жыл бұрын
In the beginning, the harness disconnect was for the fog lights?
@Realtruck2 жыл бұрын
Hey John, that harness connects to the factory fogs and also the sensors if equipped. Hope that helps!
@josafatortiz38822 жыл бұрын
Thanks !
@ToddSalisbury Жыл бұрын
Great video!!!! Thanks
@andydeppe2175 Жыл бұрын
They forgot to tell you about the 10ish clips that hold in the heating cord that you have to remove as you're holding it up when it's off
@Nytro22772 жыл бұрын
Excellent video
@Realtruck2 жыл бұрын
Glad you liked it!
@zacharysmith78722 жыл бұрын
If you have a block heater, that harness has to be disconnected separately.
@Financebyhorus2 жыл бұрын
All respect to the techs on the video but it’s a total waste of time and effort. I had at the shop a 21 Ram and I tried to follow all the steps, because it was my first time with this type of trucks ,all I had was a big headache!!! Guys fastest way is removing the 18 mil bolts on the front brackets. And You’ll just spend 10 min maximum .
@Realtruck2 жыл бұрын
Sorry to hear about that. We appreciate you sharing!