Hi all. I've added Super Thanks to my channel. If this video has saved you the expense of buying a new pair of headphones, please consider donating via the "THANKS" button. Cheers!

my headphones fell on the floor at the gym today and the left side stopped working. I was seriously about to throw them away. Your video saved my day, and my money!! thanks!!

Man , you know what ? I just want to cry . I have this problem for like 1 year and you just fixed it . Thanks a lot.

So glad I looked for an answer on my left speaker not working. I disassembled it and saw that the board was intact. So I looked overall and all seemed good. Last thing I did was spray contact cleaner on the board. After reassembling. I powered on and heard both speakers 🔊 Thank you for having this available. You made my day. Now I can listen totally. And listen to these bad boys when I mow my yard!!👍💛💙

That was EXACTLY my predicament! For a moment I thought I had lost my wonderful-sounding headphone, and then I found your video and fixed it in less than five minutes! Thanks dude!

Finally! I opened mine, pulled on the springs ever so lightly and reassembled. Working again, thanks so much!

Almost went to JBL service center which is 2 hours away from my home then i found this video and it works! Thankyou ✨

Yay! Thanks a lot for showing how to properly open and close these. Got both sides of the phone working again! Opened, stretched the springs, as someone suggested in the comments, and closed - and it was fixed. (The circuit board was firmly in place.)

Thanks rob, i was going to replace mine because of several problems, but seeing how easy is was to take them apart, i dont need to! Thank you for saving me and my headphones!

This video is a lifesaver. Thank you so much for saving me from making an expensive decision! My headphones are working perfectly now.

Thank you very much for this video mate. I have the Tune500bt, almost the same model but with longer battery life and some other feature I think but same appearance. A nephew of mine dropped them 2 nights ago and they completely stopped on the right side for me unfortunately. I was reading through the comments and found someone who had the issue and followed his suggestions about the springs not touching the pads etc. I stretched them out and now it works normal again. Thanks for the video, I will even leave a like on my way.

Brilliant video. I've followed your easy steps, tested the coils and now my JBL's are working again! Thank you from South Africa 😊

Works perfectly. When I went home frome work my right earpiece stopped working. Now (after dinner) I went to look at possible repair videos. I have seen yours and I wanted to check that it was really the right earpiece that was not working. It seems that watching your video repaired my headset 😃

OMG thank you! Left side was not working. I've just literally opened that side, cleaned it a bit and it works!!!

Thanks for the help! Mine stopped working on the left side after they fell on the floor during my training and thought there was no solution. Just found your video and gave it a try. I'm so happy I tried! They're working fine now 🤩🤩🤩

Thanks you so much🔥🔥🔥🔥 I was so worried when my previous JBL TUNE 600BTNC randomly stopped working. Thank you and bless you

This video just saved me a few hundred dollars, This helped a lot. Good stuff mate✌🏽

Wow!! Thank you very much. By following your advice I fixed my JBL TUNE750BYNC left side that wasn't working after a fall down

Thank you so much, got mine working again after they fell c: This was a great tutorial!

I had the same symptom, but turned out the actual speaker was open circuit. Also, I guess I have a newer version of the Tune 500BT because there were no springs; now there are soldered wires. Still, I had a second non-working pair so managed to fix this one by replacing the speaker. And would never have figured out how to open, test speaker resistance, and then replace the pad, without this video. Thanks.

The way you put back the soft padding is truly impressive. I'm still working on it. 🤪

Ich danke dir, war schon so traurig weil sie runtergefallen sind und ich natürlich den kassenzettel nicht aufgehoben hab ... Dank deinem einfachen verständlichen Video hat man Geld/ Zeit und Elektroschrott gespart 🤩

Wow! Thanks so much!! Took two attempts, but it really worked!!

Had a problem with the right side, it's a bit different there, the board was not moving, but video helped me to understand about that connection (strings and pads... I am not an electrician, sorry). I think strings were short, they didn't touch those pads, so I helped them a little with a force. It works now. Thank you :)

Cool, I only cleaned those contact where the springs touch with some isopropanol and now it works again (I didn't see any dirt or anything but somehow it worked). Thanks also for showing how to put the ear cushion back on, that was easier than I thought!

Thanks so much. Very helpful..fixed my troubleshooting (jbl 500) already. It worked! Godbless. More power!

Excellent tutorial Rob. Very appreciate.

Thanks! The soft padding came off on the right headpiece. I had no idea how to put it back until I watched your video! Thanks! I am now subscribed and I liked your video😁

Rad video! How do you disable the led on these?

Thank you sir, because of you i wont have to buy new headphones

Had mine for years, the left side barely works now, was wondering were you can buy replacement spring things, pretty sure mine are corroded

problem solved, great guide, thank you very much, keep it up!! by from Italy

Thanks for sharing this!🙌 you're the GOAT!🏅

Thanks for this vid. Just saved my son’s headphones 👍🏻🥳

Super thanks! My JBL BT's left headphone is working again.

Awesome man! Thanks for the info, worked perfectly.

Mine fixed this way thank you so much!

Thank you very much, you saved my headphones 🤩

Problem fixed! Cheers mate, great video 🎧 🎆

What did you use on your video? Please can you answer I see everyone have their headphones fixed

Thanks for your video!! I was about to throw the headphones to the bin. Good work!

I have a Momentum 2 that has been great for me but my water bottle leaked in my bag and after about 3-5 months after that it randomly pairs with my phone will it fully stopped pairing. It powers ON and I can use it wired but I miss the wirelss function of it. I believe the bluetooth does not power ON or the part that needs to power on the bluetooth is damaged. Have ever looked ito one or know where I should start?Thanks

Thank you for this solution. I was in the same situation, but on the other side.

TY IT WORKEDD!!! I STRETCHED THE COIL LIKE THE OTHERS IN THE COMMENTS AND IT FINALLY WORKKKEDDD

omg I´ve been having the exact same issue! i can´t hear a thing on the left side! I´ll definitely try this out. Thank you!

Thank you! It was very useful.

hey i slept and probably presssured the minus key button and it won't click and that is creating the issue so I see you opened the left one can I do that with the right one to?

Do you have a guidance how to replace the battery?

Where are you based , I got the same problem or might be the switch

It works to the wireless ones?

You just saved my day ❤️

Well this help if the headphones won’t turn on?

Saved my phones too ! Thanks !!!

excuse me but can this fix both sides of the headphones? or only one

can yall help me out when i take out the screws the black part wont open its glued

what to do when the battery are overheating when charging like do i need to replace the battery?

I have problems with the charging any advice?

It worked!!!!! Unbelievable! Ty man 👍

The unit has no response.Not used for long time.Could the battery not working ?Thanks.

My 500bt sounds very high pitched after i assembled it. I can't fix it. I took it apart, cleaned it, stretched the springs but there is still no bass. Do you know how to fix this?

What is the battery dimension and mah of jbl t450bt... Please reply

my jbl wont turn on and the volume button and stop button is not working too do you know what should i do?

Thank You. Love from Ethiopia

HOLY SHIT!! I was so sceptic about this and I was about to throw mine away but then is was like why not try it and it ACTUALLY worked 😳

Like a charm, thanks!

It worked! Thank u so much

My left only works if i move around my right one... I tried your method on the left but it didnt work. I dont understand how to fix, please help

Excellent video! Short, straight to the point but still you can learn few tricks. We need more of those kind of, not useless talking and sh...!

Repair successful!! Thanx a lot!!!

I just wanna say thank youuu so muchggg Man

Thanx so much. It works. You the OG

It worked!!! Thanks a lot!!!

Thank you mine are working again!

Ty so mich this savwd me another pair of headphones

My off/on button is idk like loose and idk how to fix it

when the volume is low on 1 side check if there is litle iron peaces/dirt on the speaker at ear side of the litle speaker ...i had this and only litle volume came out ,now fixed.

thank you very much!

Does anyone know how to reconnect a earphone that popped out of the swivel? I fell asleep with them on and now one side is hanging.

Where is the thing at Mine look fine but not playing

Thank you idol, hehe right lang kasi gumagana, ngayon ok na 👍

a hundred thanks to you

Thanks!

i have 450BT JBL head phone BUT THERE IS SOME CHARGING PROBLEM WHOLE NIGHT CHARGED BUT NOT POWERON...PLZ HELP ME DEAR....

HOW TO STOP THE HISSING SOUND ONY JBL NC 760 ?

thx, this worked

Maaf ijin nanya, kalo tiba2 koneksi sering terputus gimana cara perbaikinya ya?

Hi, I disassembled my t450bt and need to change the black wire (with the 4 wires insinde) that goes through the whole headphones. I'm new at this and don't know which kind of wire to order. Please, can you help me? Cheers

Thanks, nicely made. But my headphones work perfectly on both sides but on per cable. Bluetooth or startup sound only right. Anyone knows this problem and how to solve?

Mine seem to only work when I place my t500s at a certain angle

Thanks for sharing

gracias

My right side is it working plz help

I have a problem, my headphones fell and now the buttons wont click (most of them) and they get pressed really easily

Does anyone here know how to factory reset this model? (JBL Tune 500bt). Volume + and - simultaneously does not work..... Thanks.

Mine stopped charging out of no where pls help.

Thanks U mate! U saved my life-and my money too ;) :D

what do you use to clean the board?

Thanks

nice job bro

I have a pair of Tune 600BTNC's and wired they work fine but with bluetooth the right side doesn't work. Can't find anyone with a similar issue or solution. Anyone else ran into the same?