How to replace 2005-2009 Mustang GT water pump

Рет қаралды 10,874

Жыл бұрын

In this video i show you how to replace the water pump on your s197 4.6L 3 valve. it's a really easy job that shouldn't take you to long and basic hand tools. If you enjoyed the video please leave a like, comment, share and subscribe. Thanks!
Tools and parts:
Tools used in most videos:
socket set: amzn.to/2ycTz7U
plier set: amzn.to/2Zs7na3
ratchet wrenches: amzn.to/3bXLYrz
electric ratchet: amzn.to/2ZDjOzQ
flash light: amzn.to/3egL5vS
pliers set: amzn.to/2AZqrC5
screwdriver set: amzn.to/2TESsFv
gloves: amzn.to/2TESsFv
pick set: amzn.to/2ZAfwsL
Disclaimer:
Due to factors beyond the control of JunkyardJunkie, I cannot guarantee against improper use or unauthorized modifications of this information. JunkyardJunkie assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. JunkyardJunkie recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of JunkyardJunkie, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not JunkyardJunkie.

Пікірлер: 27

@donnisraines 3 ай бұрын

My 06 GT is still running the original water pump and I’ve been planning to replace it with an Edelbrock hi volume pump. I’d heard Mustang pumps were incredibly difficult but after watching this it looks very simple and straightforward. Thanks.

@JunkyardJunkie 3 ай бұрын

Ya I don’t know why they’d say that. Especially after having electrical fans instead of a fan clutch and everything. Best of luck. Let me know how it goes. Thanks for watching!

@brendencesario7034 6 ай бұрын

Really saved me a lot of time and money with your video! Thank you for your video and my Shelby does as well!

@JunkyardJunkie 6 ай бұрын

I’m glad I was able to help! Thanks for watching!

@adrianmendozaza 4 сағат бұрын

Thank you man 🙏 ❤❤❤

@primomendoza2190 8 ай бұрын

Great video, explanation, and details are awesome.. thank you sir

@JunkyardJunkie 8 ай бұрын

Thanks! I’m glad I could help. Thanks for watching!

@newport348 Жыл бұрын

Thank you for this video. I’ve got a 2009 mustang GT. As soon as I added water into my reservoir, it started leaking at the bottom. Time to change that water pump. 🚘👍🏿

@JunkyardJunkie Жыл бұрын

I’m glad i could help! Good luck and thanks for watching!

@Kingofnoodles 5 ай бұрын

Great video. Extremely informative.

@JunkyardJunkie 5 ай бұрын

Thanks! Glad I could help. Thanks for watching!

@joelpena2947 Жыл бұрын

Thank you for providing the torque settings

@JunkyardJunkie Жыл бұрын

Glad I could help! Thanks for watching!

@CeoBigSmiley 11 ай бұрын

Great Video 🔥🔥

@JunkyardJunkie 11 ай бұрын

Thanks! Thanks for watching!

@Grahamulet 11 ай бұрын

Thank you for your help

@JunkyardJunkie 11 ай бұрын

Glad I could help. Thanks for watching!

@Grahamulet 11 ай бұрын

@@JunkyardJunkie Yes sir, watched the video and got it done almost as fast as you lol

@562driven2 Жыл бұрын

My stang just started leaking bad on my drive up north from California. As I would fill it at the gas stations instant leak and it wasn’t coming from any hoses or radiator. Thanks for the info, bought everything I needed and going to tackle this job tomorrow 👍🏽. Curious what went bad on the bad water pump?

@JunkyardJunkie Жыл бұрын

I’m glad I was able to help! You should be able to knock it out quick. So, with all water pumps usually they just get slop in them where the internals wear out. Hope this helps. Thanks for watching!

@eddiewalker5843 Жыл бұрын

Pretty simple. Belts are a problem after removing. Tightness. But thanks

@JunkyardJunkie Жыл бұрын

Glad it could help. Thanks for watching!

@Johny3xtra 11 ай бұрын

I heard that u need to pull a plug somewhere above the water pump using an allen key to let the air out of the system to further avoid heating issues its a metal plug the size of a half daller. Is that necessary? The guy said if u dont do that there will always be air there. And with pure coolant that air wouldn't be there. Its called the top coolant plug it sits at the the end of the top from the radiator.

@JunkyardJunkie 11 ай бұрын

Ya it’s a place to purge air and is a good idea to use it, just to be sure. But, this car it was stripped so I filled it without it. Which is ok too it runs fine no air in the system no over heating issues. Hope this helps. Thanks for watching!

@jordansoreal 10 ай бұрын

My purge valve was stripped to so I just took the hose going into the coolant reservoir and squeezed it until I didn’t see anymore bubbles