No video
How to Replace a Bathtub Drum Trap | This Old House
Рет қаралды 647,512
Күн бұрынThis Old House plumbing and heating expert Richard Trethewey shows how to replace an old bathtub drum trap with a new PVC P-trap. (See below for a shopping list and tools.)
SUBSCRIBE to This Old House: bit.ly/Subscrib...
Shopping List for How to Replace a Bathtub Drum Trap:
- PVC P-trap, used to replace existing iron drum trap
- 1 1/2-inch PVC pipe
- 45 degree and 90 degree PVC elbows
- threaded PVC male adapter, used to connect to existing iron pipe
- threaded PVC female adapter, used to connect to existing iron pipe
- pipe dope, for creating a watertight seal on threaded PVC fittings
- single-strand wicking, used to help seal threaded connections between PVC and iron fittings
- PVC primer and cement, for gluing together PVC pipes and fittings
- bucket, to catch drips and empty water from old drum trap
Tools for How to Replace a Bathtub Drum Trap:
- reciprocating saw fitted with metal-cutting blade
- pipe wrench, two large wrenches needed to disassemble the old iron pipe and trap
- PVC pipe cutter or hacksaw, used to cut pipe to length
- pliers
- tape measure
- indelible marker, for marking the alignment of PVC pipes and fittings prior to gluing
- pocketknife, used to remove rough burrs from the ends of just-cut PVC pipe.
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldH...
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldH...
How to Replace a Bathtub Drum Trap | This Old House
/ thisoldhouse
@robertnelson9018 5 жыл бұрын
Just a tip from a plumber, before disposing of the drum trap, always break them open, i've found many cool items, including jewelry inside of these and house traps.
@madcowusa4277 5 жыл бұрын
I wasn't so lucky. Mine had quite a bit of liquid mercury which spilled all over the rough wood subfloor. The shiny beads went everywhere and kept sub dividing into smaller and smaller beads as I attempted to clean them up. Nasty stuff that can release toxic mercury vapor years. It had probably been in that drum trap since the 1950s when some idiot poured it down the drain after breaking a mercury filled thermometer.
@mastocytoma1 4 жыл бұрын
@@madcowusa4277 Wow! That's crazy!
@eliduttman315 4 жыл бұрын
@@madcowusa4277 Hopefully, you never have to deal with mercury again. However, dealing with spilled mercury is not that difficult. You sprinkle powdered sulfur on it. A chemical reaction occurs that results in mercuric sulfide, which is among the MOST insoluble substances around. Boiling concentrated nitric acid will not attack mercuric sulfide.
@TheLouisianan 3 жыл бұрын
@@madcowusa4277 I have a similar issue, but my drum trap is made of lead. Pipes were custom made since the configuration is pretty unique. Don't need to replace it yet, but I saved this video for when the time comes.
@bixbabble3935 3 жыл бұрын
@@TheLouisianan are they led drain pipes?
@mayormc 4 жыл бұрын
I love how these semi-nightmare scenarios get fixed on video in 5 minutes whereas in the real world there are unforeseen consequences like cracked pipes, barked knuckles, spilled yeech water and often swearing a blue streak. All good fun.
@charlesarp6781 4 жыл бұрын
Yes and now he has no cleanout
@mrfester42 4 жыл бұрын
That doesn't happen that often if you're experienced and these video are meant to impart a good degree of that.
@Johnkoth 4 жыл бұрын
The videos are edited. They lasted longer and scenes were editted our for time purposes. The TV show is for 30 minutes and has multiple projects in 1 episode. Plus commericals too. That leaves you with around 5 to 8 minutes per repair.
@bixbabble3935 3 жыл бұрын
@@Johnkoth the KZfaq shorts are even shorter than the full episode.
@oldtwinsna8347 3 жыл бұрын
It's all staged for the camera. Often there's a separate crew that does the pre-work to take things apart and install things that look old but were really just put in.
@coreyhunt9199 3 ай бұрын
How in the sweet hell did that adapter come off for him?! Thats insane. I dont even attempt anymore, just cut the pipe and use a no hub. He is one lucky/skilled plumber!
@TENTHIRTYONE 3 жыл бұрын
“At least I’ll know where to find a good plumber.” Bruh.
@TheBlindSwordsman 2 жыл бұрын
Witty
@geletmote 3 ай бұрын
man didnt say a word whole video then closes with that..
@quazimoto5241 12 күн бұрын
This is late but that's how This Old House is programmed lol
@davea4250 5 жыл бұрын
Loved watching Richard, learned so much over the years.
@ChaNnArD-mD Жыл бұрын
I can't think of a better plumber in the universe.
@MrWadim94 Жыл бұрын
This little kzfaq.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
@Champinote 3 жыл бұрын
So great,nobody could have made a more useful video for me. I played with lot of pipres but sinece i never had à thub bat.I actualy have to go for that job this very week ! ;)
@MrCowboy1492 9 жыл бұрын
look at all that old beautiful brass...things sure are not build like they were. Thanks for the part about the pipe dope and wicking.... Never too old to learn new tricks...
@matthewkromer9256 7 жыл бұрын
MrCowboy1492 wicking is trash. thread tape and blue goop
@kalijasin 5 жыл бұрын
That old plumbing is built like a tank.
@rastrand1 Жыл бұрын
Thank you. Mine is even older and has a cast iron drum trap. I've never seen one before but now I know how to eliminate it.
@oldtwinsna8347 Жыл бұрын
Richard is an expert in replacing sewer lines.
@insanmonster 7 жыл бұрын
Sometimes I wonder if its just tricky camera work or if these guys are really this lucky......if I would have gotten on that fitting I would shattered the whole damn thing.
@JisINSANE3 10 ай бұрын
I work a an apartment complex built in the early to mid 70's. Drum traps have been found on the old tubs they pulled.
@Pro1er 3 жыл бұрын
I tried removing the cap from my drum trap to clean it out. I had a cheater bar so long the house was spinning on its foundation and I couldn't budge the cap. Richard it the luckiest plumber I've ever seen.
@jasexavier 3 жыл бұрын
If your cover has a lip that extends past the drum, the best way to remove it is with a cold chisel and a big hammer. Drive the chisel into the lip counterclockwise, the impact helps to break things loose. You'll probably have to repeat it multiple times around the circumference before it lets go. If you put a new cover on, a wrap of teflon tape will make the job easier the next time. If you have a cover like the one in the video, you might still get it out with a chisel, in pieces.
@Pro1er 3 жыл бұрын
@@jasexavier The cap does not have a lip, only a square nut. I have a jetter with a very small head but even that won't make the 90s. I used acid to clean the drain and it's been working good for a few years now.
@bradhaenitsch1145 2 жыл бұрын
Time and patience and I have none
@bradhaenitsch1145 2 жыл бұрын
I’ve changed out one in a historic district in downtown phoenix no problem it was interesting
@aaronbays4 5 жыл бұрын
Man the original plumber that put that tub in made like a beaver with that floor joist.
@carlmax46 3 жыл бұрын
note the floor joist is over a wall; hence strength is not an issue.
@deweydodo6691 3 жыл бұрын
just went through a drum trap , it was clean inside , replaced the drain lid with the correct part and it holds good .
@socaljackpotscratcher3073 4 жыл бұрын
I usually use a pole from my kids swing set as a breaker bar on my wrench to loosen the old pipe threads.
@Scott-eo7lj 4 жыл бұрын
Cheater bar. Yeah I use anything I can find, usually a piece of 1"1/2 pvc since I'm a plumber and it's readily available.
@jacksplumbingvideos7147 3 жыл бұрын
@@Scott-eo7lj i tried pvc and it broke into bits.
@edwardmyers1746 5 жыл бұрын
OMG watching this in 2019 and Richard looks young!
@wonnie46403 4 жыл бұрын
I replaced my drum trap or whatever its called few years ago and replaced it with pvc drum trap the same looking thing except the new was pvc the old was metal. I didn't know i could just add a catch base like this. It would have been much easier and no limitation of draining water.
@kingokafor6215 11 ай бұрын
For anyone watching this use both tape and dope. Especially for plastic going into any metal.
@luxurycarkey7207 Жыл бұрын
Great job guys I love this video...
@snipercoder9778 4 жыл бұрын
Wow, everything goes off so smoothly. What are the chances in real life?
@jaco7675 3 жыл бұрын
Zero. If it’s me working on it.
@dans9228 5 жыл бұрын
You made that look simple! Great Job!
@LayneWhite 2 жыл бұрын
I had never heard of whiking until this video
@carlmax46 3 жыл бұрын
one should only put pipe dope or glue on the male end of fitting. if put on the female end the excess could partially block off the flow area.
@metallitech 3 жыл бұрын
Epic ending to the video.
@davidfrankel9267 2 жыл бұрын
I wonder if they can always get the right pitch after the switch. It would suck to have to cut the stack or raise the tub.
@mitchryder1953 5 жыл бұрын
I think they take it apart first, then put it back together for the show. On all of this fix it or replace it, they never show you what to do if this goes, wrong or that goes wrong.
@TheLouisianan 3 жыл бұрын
I noticed that first saw sal cut he made was at about a 45 degree angle and then magically he goes back to that pipe and it's not just an exposed male thread. Probably some curse words when taking the old piece off.
@donreding2892 3 жыл бұрын
Nice easy job , and done the right way!
@9MillDill 5 жыл бұрын
Great video literally doing that right now haha
@Chuck59ish 9 жыл бұрын
Just think how many houses in North America have that old drum trap still in their systems.
@bigpardner 6 жыл бұрын
What's wrong with them?
@ClicketyClack 6 жыл бұрын
The main problem is they collect sediment and can't be snaked. Most have a cleanout cap, but after decades it may be impossible to open, or inaccessible behind a ceiling or wall.
@msmejekify 6 жыл бұрын
Clickety Clack I have a 50 yo house and the tub drain is stopped. I've tried everything. This could be the reason? I have easy access to it but don't want to tear it apart if I don't have to. Sorry if this is bothersome
@phillies0477 6 жыл бұрын
matt smejek most likely that is the reason. I have one as well and the shower/tub drain is very slow to drain. After baking soda and vinegar, plungers, and snakes, you can pretty much assume it's the drum trap. The problem with me is I'm a hairy guy, so all the hair is probably all caked in the drum trap.
@BRUCECRUZ 6 жыл бұрын
Yep, I'm living in one now buit 1968. with the same issues.
@jeffcanyafixiy 5 жыл бұрын
If that was me there would be far more cursing. 🤬😁 Great video 👍
@Iamkitkatbar 6 жыл бұрын
I wish every time I went to replace a tub trap it went this easy
@puglydoodle 5 жыл бұрын
Yeah especially in western states where the trap is in the slap. Good luck with just replacing the trap.
@mikehardesty98 5 жыл бұрын
No shit did one today no pipe wrench was going to loosen anything had to saw zaw pipe out of threads and chisel it loose took over 8 hours .i think this was prepped before cameras rolled.that pipe is way to old to spin out that easy, just saying
@Animusapertus 4 жыл бұрын
yea a lot of people are saying this, i think for their 30 min episodes they cant show all the work it takes most times, they just show the main points of what they are doing
@erics3886 4 жыл бұрын
@@mikehardesty98 try heating it up next time after you let it soak in PB blaster for a few minutes. Get it hot then attempt tighten it a little before loosening it. 8/10 it will come out.
@adamguymon7096 5 жыл бұрын
Nothing short of having a plumber on call.
@michaelbarr8379 5 жыл бұрын
It's open replace the hole tub assembly
@davidparker9676 2 ай бұрын
That's not how TOH does it. Mickey mouse all the way.
@anthonymacolini2609 4 жыл бұрын
I am a plumber he should have replaced the whole tub waste an overflow and cut out that galvanized drain pipe he retired into.it’s not meant to be drain pipe it’s ok for venting.Eventually down the road drain pipe gets all scale and clogged up,that if you try to snake it’s like drilling through concrete.sometimes you can get it clear or if you do get it clear sometimes the pipe ends up leaking.
@birddog7248 2 жыл бұрын
I am a self-employed plumber with 34 year's experience and only on TV Will a 70 year old 1 1/2" copper male adapter come out of a steel fitting that easy. We would have charged $185 plus materials, plus hole cutting for that service call
@sprouse9 4 жыл бұрын
Question: Why doesn't the new pvc trap have a clean out plug?
@m3rdpwr 4 жыл бұрын
I'm going to guess because it's going to be a finished ceiling again. I don't think you could have a clean out where where it would be blocked by a finished space.
@erics3886 4 жыл бұрын
You can remove the overflow plate in the tub and clean it from there as well.
@TheLouisianan 3 жыл бұрын
You could easily snake that too. That's essentially a sweeping elbow. I have some old cast pipes with a sharp P trap and it has the clean out plug on the bottom. Realized it's there because I couldn't get my snake to make the turn.
@bradhaenitsch1145 2 жыл бұрын
It’s a drain plug for cold weather climate
@jeffmoss26 7 жыл бұрын
this was in Cleveland!
@caraudiosolutions 3 жыл бұрын
Leaks galore
@blackpine6693 3 жыл бұрын
If it ain’t broke don’t fix it......have one that’s been there for 100 yrs......works perfectly.....
@jacksplumbingvideos7147 2 жыл бұрын
drum traps fill with sediment and clogg that's why they replace it.
@Maxid1 9 жыл бұрын
At 0:52, is he cutting right toward his fingers? Richard will be all right, specially if he cuts his left hand off...
@stephensnell1379 6 жыл бұрын
He's not cutting near his fingers No one is that stupid
@kingofrandom9504 6 жыл бұрын
You can cut near your fingers bit have to wear hearing protection for an electric mower😂😂😂😂😂
@BradiKal61 5 жыл бұрын
So both fittings came loose for you? Im calling shenanigans
@omarhernandez289oh 5 жыл бұрын
Almost never happens
@Mrcaffinebean 4 жыл бұрын
BradiKal61 mine while I cut a single pipe and the entire stack falls apart in a heap lol
@BradiKal61 4 жыл бұрын
@@Mrcaffinebean I call plumbing 'lighting the fuse' because you are starting a sequential trail of destruction.
@Mrcaffinebean 4 жыл бұрын
BradiKal61 haha very good analogy
@kchicago64 3 жыл бұрын
Probably the original cast iron drum trap was replace with a cast copper drum trap the one who replaced it probably had a hard time cutting out the old cast iron one and galv piping and did anyone notice that Richard didn’t try to clean de-burr or remove the copper piping attached to the waste and over flow on the bottom run of the tee. If the waste and overflow is in good shape better to keep it it better made than today’s stuff
@stevewhite791 2 жыл бұрын
Haha. Nice ending.
@PatConway-qd2cu 7 ай бұрын
He did the entire installation with no pvc prime as required by code?
@marquette93 3 жыл бұрын
I was under the impression to never have female plastic threads going over male metal threads?
@allieb7757 3 жыл бұрын
I wish you could come and do mine. I'm in Australia. It's near impossible to find a tradesperson to come and do this job. They all don't call back.
@anferny8 5 ай бұрын
Anyone know what kind of 90° fitting is installed directly into the tub drain?
@davidharter7151 Жыл бұрын
Now do this on a slab home inside a 18inch square hole in the concrete.
@dc2090 10 ай бұрын
Fixed that trap issue, but that old drain pipe I would be is 90% clogged... least that was my case...
@bsm6776 5 жыл бұрын
Going to need to get a plasterer to redo that lath
@jobblyvids 3 жыл бұрын
any benefit to increasing P trap and after to 2"??
@AStanton1966 3 жыл бұрын
Those brass fittings looked so old, I wonder if Al Capone used that bath tub?
@kalijasin 5 жыл бұрын
That guy has some serious remodeling to do.
@matthewkromer9256 7 жыл бұрын
they make levels!!!!
@bygsmuv5820 3 жыл бұрын
Imagine a level drain pipe...😂
@patrickcotter4386 7 жыл бұрын
When looking at the trap that was removed, look all the way to the left, the first bend directly under the drain has a drill sized hole causing my tub to leak out before it even gets to the p-trap, also the tub is slow draining even when this is happening, any suggestions?
@iliketakingshowers 6 жыл бұрын
All that work and he leaves the old trip lever...
@elevate32767 3 жыл бұрын
In terms of programming, it's to avoid "scope creep"
@shantor100 Ай бұрын
Notice the dripping water
@BIGGBAY90 3 жыл бұрын
I have a drum trap under my sink, would I have to cut it to remove
@Simon-qn5wm Жыл бұрын
I know if I tried to undo that fitting it would be seized soild, take hours & probably strip the thread out of fitting
@jonienglish3231 4 жыл бұрын
HOW COME NO PURPLE PRIMER BEFORE GLUE ??? i thought for PCV Pipe need to Purple Brime before GLUE ??? what gives
@johnsushi2007 4 жыл бұрын
Joni English I think they also make one now where the cleaner and the glue are in one solution, but I could be wrong.
@TheLouisianan 3 жыл бұрын
@@johnsushi2007 I've scene "clear" primers too. They probably used that, but I like the purple stuff since I know I got full exposure.
@jaco7675 3 жыл бұрын
I was wondering the same thing. 🤔
@ethandumas6937 3 жыл бұрын
Ah yo who tha brotha gotta be cleaning the parts son,,, thas raccisisttiss
@HongNguyen-rz2uv 2 жыл бұрын
Great
@microphonixvirtualstudio1634 4 жыл бұрын
Teflon tape will work just as well and will last as long without any leaks.
@midwest4416 2 жыл бұрын
@ :40 that pre-cut brass is no match for the recip saw. Interesting drum trap antique quite a piece of engineering to be replaced by by a simple p-trap
@TNtoolman 9 жыл бұрын
It is worth the few extra seconds to de-burr the outside of the PVC cut pipe too. It makes slipping it into the connector trouble-free.
@matthewkromer9256 7 жыл бұрын
Porsche924Tim don't use a Sawzall
@kalijasin 5 жыл бұрын
Or use a deburring Tool.
@TheHungarianchick 4 жыл бұрын
I have a PVC drum trap under my bathroom sink with an access on the bottom. It’s a complete PITA to clean when clogged and there isn’t access in the basement to snake the descending portion of the pipe. I’d personally love to punch the plumber installing that mess.
@jacksplumbingvideos7147 3 жыл бұрын
that drum trap has probably been there a long time.
@derakmurray1086 6 жыл бұрын
Great video enjoyed it! Bad news It pop up after i worked on a tub.😠. And question can I use the blue glue 4 Plumbing. Is it code allowable or for repairs only
@lilboyblue5977 5 жыл бұрын
Blue is used for pressurized systems
@dougpeters1625 3 жыл бұрын
0:52 chops finger off with the sawzall
@nickbailey202 4 жыл бұрын
How high can water pressure push up the trap? I have one of these basin traps and it's a PITA. But I haven't replaced with a p-trap because it needs to be like 6 inches. Is this ok?
@TheLouisianan 3 жыл бұрын
If you mean how high it will sit? Assuming you have no clogs the water level will sit just at the bottom of where the water exits the pipe at the top. Water will also sit at that exact same elevation in the pipe leading to your shower drain. If you have a clog, that's a different story.
@2020Bookworm 3 жыл бұрын
I wonder how much that plumbers visit would cost the average homeowner for that job he just did.
@glaaddyy 2 жыл бұрын
$850 for me, decided to tackle it myself
@ashamobley-keel4171 2 жыл бұрын
1500. Trying to see if I can do this myself.
@BobbleHead90 2 жыл бұрын
Is this house under construction or is it really that messed up?
@DirectCurrent4u 5 жыл бұрын
You would think that he would of put in a union or something so that the next time you needed to place something you wouldn't need to cut all that pluming out and start all over again. (IMO) Thanks for sharing...
@chefbillyx 5 жыл бұрын
At 0:38 Wow were did you get that blade😂😂😂😂 the pipe was butter or that blade is made of magic lol.
@numssened 4 жыл бұрын
chefbillyx specially for cast iron. Home Depot
@jasexavier 3 жыл бұрын
It's thin copper pipe, so it basically is butter. Although, I worked in a lab where we cut a lot of metal, and we had some recip blades that cut thick metal, including mild steel, like magic. I can't remember the brand (might have been ICS?), but they were labelled 'For Metal 1/8" and Over'.
@joemiller2629 2 жыл бұрын
It was already cut off camera.
@jeffreyrichardson 3 жыл бұрын
laurie shermans tub william rogers class room sub montreal steak rub
@user-qp4gp4ri8c 25 күн бұрын
y no primah?
@QQZinOficiall 6 жыл бұрын
Parabéns
@josiahbirdsong4272 5 жыл бұрын
Question for plumbers. I have this exact scenario with having to replace my drum with pvc ptrap. Is it true I need to vent ptrap? I have been told this on multiple forums however do not understand exactly where to vent the trap.
@sean45crooks 5 жыл бұрын
EL1TE ONE you need a vent on the drain downstream of the trap within 6 feet of the trap itself if its 1.5" and 8 feet if the trap is two inch
@stevelovesgod 5 жыл бұрын
Its should be near your toilet line which should be within distance of the vent
@bradhaenitsch1145 2 жыл бұрын
These guy’s read to much if you have enough room yea vent it but it’s not worth tearing up yer house unless you just can’t live with a slow draining tub
@KingSobieski Жыл бұрын
At this point change out the tub drain as well...........
@fproszek 6 жыл бұрын
Why not leave a threaded cleanout. Might save a wedding ring by simply unscrewing a plug.
@ammerconsulting 6 жыл бұрын
That would mean having an access panel in the ceiling.
@BRUCECRUZ 6 жыл бұрын
Crap, I think thats what's happening with my tub drain.
@juanaguilera709 5 жыл бұрын
Why not remplase all next to the tub?? Is very old too
@padzz2198 9 жыл бұрын
pipe dope xD
@eduardsiger1860 3 жыл бұрын
Where’s the primer
@rsz90182 8 ай бұрын
I failed your installation. You didn't use the purple primer.
@makgou9148 2 жыл бұрын
You left the section of pipe in the vent drain tee after you cut out the drum trap and didn't remove it! Lazy
@aaronl731 4 жыл бұрын
How do you replace a p trap that comes from the floor?
@axelbuckets3858 4 жыл бұрын
Aaron Lipscomb all p traps come from the floor
@rskalisky 4 жыл бұрын
@@axelbuckets3858 Pretty sure he means the drain terminates at the floor rather than going into a wall.
@erics3886 4 жыл бұрын
Is it on a concrete slab? If so, you will have to pull the tub or shower then dig it up to replace the trap.
@bradhaenitsch1145 2 жыл бұрын
Call a real plumber it’s no match for you
@CharlesUibel 3 жыл бұрын
why didn't they think of that 100 years ago?
@samuelt2072 5 жыл бұрын
This can't be real... nothing went wrong.
@tjfreak 8 жыл бұрын
So was the whole reason for doing this the "scum" reason & easier clean out ? was there a sediment build up problem that warranted this & do you now build an access panel for future accessibility ?
@ammerconsulting 6 жыл бұрын
Drum traps worked, but they also collected sediment. The more modern P-Trap is pretty much self-cleaning. An access panel is not necessary, because if there is a clog in the future, you can run a snake through the drain above. You cannot run a snake through a drum trap.
@jeffreyviglone4790 4 жыл бұрын
No primer.....
@corpse4434 7 жыл бұрын
Hmm The fastest way to get rid of hand
@jonhipolito807 5 жыл бұрын
Every pipe needs doped
@coolski1954 6 жыл бұрын
why didn't you use a la.trap
@stevelovesgod 5 жыл бұрын
The u piece is the trap
@finscreenname 6 жыл бұрын
I thought pipe-dope and plastic is a no no?
@calebburns4346 5 жыл бұрын
I never herd that. Ive used pipe dope for years on pvc, cast iron, brass, copper and haven't had any issues. In fact ive stopped using thread tape and have switched to pipe dope for most things that aren't pressurized
@djscrizzle 5 жыл бұрын
Old school pipe dope has mineral oils that'll break down the plastic. This kind tends to be grey to greyish-black in color and reeks of oil. Newer stuff is PTFE based, and won't affect plastics. Oatey Great White and Rectorseal no. 55 both come to mind, as does Blue Monster's pie dope.
@icecold155 6 жыл бұрын
Clear glue? and no primer? wow... 2014... I bet that repair has already been cut out
@ammerconsulting 6 жыл бұрын
This video has been pretty heavily edited from the original format, but at one point it does show the homeowner using the cleaner on the pipe.
@Menmyboy1230 6 жыл бұрын
Y
@bigsweaty8088 4 жыл бұрын
:38 lmao yeah that wasnt precut off camera already or nothin
@rawbacon 4 жыл бұрын
It's copper that saw rips thru it easy, no need for precutting or camera trickery.
@bigsweaty8088 4 жыл бұрын
@@rawbacon you could be right it just looked a little too easy. Im aware its that thin walled copper. And I do keep nice sawzall blades with me relative to these animal guys. Still it was just a joke it jut looked too too easy at first glance
@MrJmorra79 3 жыл бұрын
Use s torpedo level like a real plumber
@t-fin7309 3 жыл бұрын
Richard is soaked lmao
@55098 4 жыл бұрын
Why do you wear gloves could never figure it out
@jacksplumbingvideos7147 4 жыл бұрын
Steve lavimonere
Fabiosa Best Lifehacks
Рет қаралды 27 МЛН
The Excellent Laborer
Рет қаралды 341 М.