How To replace a bulb in a recessed downlight

How To replace a bulb in a recessed downlight - Your local Electrician

Рет қаралды 300,380

Күн бұрын

Are you suffering with less and less light on an evening due to constant failure of light bulbs in your recessed downlights (spot lights)? Take a look at this video to be sure how to change the light bulb yourself rather than call an electrician.

Пікірлер: 177

@hustake4475 2 жыл бұрын

THANK YOU!!! Have the 2nd type in my bathroom, a couple had gone out - I'd never have had the confidence to unscrew it with as much force as was required (an absurd amount!) if not for your helpful video. Thanks again Steve!

@user-nr3we2iw8z Жыл бұрын

Finally found a video that explains how to change a bathroom down light(2.20). Thank you so much, really clear instructions and then made it really easy to change the bulb.

@MultiTitinaki 5 жыл бұрын

Very informative video. I contacted Steve and he was very helpful and responsive. Thanks Steve!

@breky14 3 жыл бұрын

Thank you for this video, now I'm comfortable changing out our ceiling lights in our kitchen. Cheers!

@mayurgadhvi007 3 жыл бұрын

Thanks for this informative video matey! Was struggling to change the bathroom spot light bulb as the fitting was a bit tricky, you have explained all types so well..👍🏼 Keep doing the great work..

@JPSElectricalServicesBristol 3 жыл бұрын

Thank you so much for taking the time to share your appreciation. I’m so pleased that you found my video useful. Kind regards Steve :)

@williamgibson189 2 жыл бұрын

Excellent Steve…….Needed to change the GU10 in an Aurora EN-DLM981X but found I’d lost the leaflet. Tried umpteen ways to remove the bezel but didn’t want to break anything so got nowhere. Found your magic video and got the job done in less than 10 minutes……and that included going to get the replacement bulb from the larder. Thanks mate. : - ))

@markgilmore2077 2 жыл бұрын

Thanks so much! You gave me the confidence to FORRRRRCE the face plate off, and I was able to change the bulb. Perfect!!

@lindarattray2462 28 күн бұрын

Excellent video and like the look of your shed!

@JPSElectricalServicesBristol 26 күн бұрын

Hi @lindarattray2462, Thank you for taking the time to comment. I'm so pleased that you found my video useful :)

@penelopeallport3498 Жыл бұрын

Brilliant Steve. I've just managed to replace our old fashioned metal clip type. Would never have know how without your advice. 👏💥

@PippaB 2 жыл бұрын

You have saved my sanity Steve! All four lights in my ensuite failed within a year of my loft conversion. I couldn’t work out how to open up the to get to the bulb (I have the vicious, break-your-knuckle kind -don’t ask how I know!! 😳☝🏼) After watching your brilliant video, turns out I just needed brute strength to turn the stuck covers anti-clockwise. Simples! So I now have light in my shower room - 4 years later. 💡

@Parsley1968 4 жыл бұрын

You absolute star!!! We’ve had three bulbs go in quick succession in the bathroom and could not for the life of us work out how to change them. Other half has just come downstairs triumphant. Thank goodness for you.

@JPSElectricalServicesBristol 4 жыл бұрын

Parsley1968 thank you so much for taking the time to comment. I’m so pleased that you found my video helpful and it helped with the issue. Kind regards Steve :)

@sianp5227 2 жыл бұрын

Been trying for ages to pop of my bathroom spotlights, was about to send the Mr up into the attic, convinced you must have to do it from up there (he doesn't have much clue either!) and sure enough a turn anti-clockwise did it. 🙄 thank you!

@adambethell4153 Жыл бұрын

Thanks! Quick video, easy to understand, exactly what I needed for my bathroom lights

@stevesharkey5026 4 жыл бұрын

I have been struggling to replace a bulb in a sealed unit in our shower room for months, until now, thanks very much great video

@JPSElectricalServicesBristol 4 жыл бұрын

Thank you for taking the time to post your comment Steve. I’m so pleased that my video proves helpful. Have a fantastic Christmas and New Year Kind regards Steve :)

@Willakimbo_ Жыл бұрын

Thank you so much! Was proper struggling thinking, didn’t even think to twist the outside part in regard to the 2nd one! Never seen one like that before but I’ve learnt something new today!

@JPSElectricalServicesBristol Жыл бұрын

Thank you for taking the time to comment. It’s always great to see that my videos are providing valuable help. Kind regards Steve :)

@AndyC605 7 ай бұрын

The best on youtube explaining all the different types saved me hours

@JPSElectricalServicesBristol 6 ай бұрын

Thank you for taking the time to comment. I really appreciate your kind words. Kind regards Steve :)

@edithwoodhouse3669 3 жыл бұрын

Phew. A good explanation.... we have both types of fitting in our new build. Bulbs that should have lasted for years have all started to go one after the other within a year. What a faff! Don’t remember a problem changing ordinary lightbulbs in the past😂. Thank you for helping to solve a problem.

@JPSElectricalServicesBristol 3 жыл бұрын

I’m so pleased that you found my video useful. Thank you for taking the time to comment. Kind regards Steve :)

@liammears 3 жыл бұрын

I'll mention here in the comments that some you need to replace the whole fitting rather than the bulb. I spent the best part of an hour including watching this video to figure out how to take the bulb out of my bathroom light. Went to the manufacturer website and it turns out you can't. You replace the whole light fitting!

@JPSElectricalServicesBristol 3 жыл бұрын

Thank you for taking the time to comment. I have had a few people contact me to explain that they cannot see how to remove the lamp. On some newer LED units the lamp is integrated into the unit so it is not removable. Where possible, I try to avoid installing this type of unit. LED isn't quite what they made out it would be and there are many units failing. With this in mind, it's so much easier to install units with replaceable lamps. Thank you for your feedback. I'm pleased that you resolved your issue. Kind regards Steve :)

@Madnezza Жыл бұрын

Wish I would have watched this before trying; got caught by one of those snapping clips and nearly lost a finger haha. Thanks for the clear video. It gave me the confidence to open up the case and do the replacement after my finger bent back into place.

@robertwright9465 5 жыл бұрын

Fantastic video and support from this company

@davidargent2775 2 жыл бұрын

Thank you ever so much - again it was the bathroom one that was causing heartache for me!

@annatikhonova6409 3 жыл бұрын

Thank you, thank you, thank you!! this video saved me and my bathroom

@JPSElectricalServicesBristol 3 жыл бұрын

Thank you for making me smile. This comment alone has made it worth the effort creating the video. I'm so pleased that it was of use to you. Kind regards Steve :)

@herbman786 4 жыл бұрын

Thanks mate, very useful, helped me change out my spotlight

@JPSElectricalServicesBristol 4 жыл бұрын

herbman786 thank you so much for taking the time to comment. I’m so pleased that this video helped you. Kind regards Steve :)

@KP-mb9jx 9 ай бұрын

Thank you some much for posting this video. I found it extremely helpful.

@edithwoodhouse3669 3 жыл бұрын

So useful..... again.... as l had forgotten how to change bathroom bulb from my last attempt. A great help.😀

@JPSElectricalServicesBristol 3 жыл бұрын

I’m so pleased that you found my video useful. Thank you so much for taking the time to post your comment. Kind regards Steve :)

@HelenGreen-d1q 16 күн бұрын

Brilliant, absolute lifesavers thank you!

@emmajenkins82 3 ай бұрын

Thank you this is so helpful trying to get to work out how to fit the spring.

@JPSElectricalServicesBristol 3 ай бұрын

Thank you for taking the time to comment. I’m so pleased that you found my video useful 🥰👍🏼

@petehobson1054 2 жыл бұрын

Just saved my sanity mate! Thanks a lot!

@leighboivin63 2 жыл бұрын

Thanks heaps for posting this, really great help

@elliecole6659 3 жыл бұрын

Hi Steve! Thank you for the helpful video. We have the EN-FD103204V lights in the bathrooms but they seem to give out such a little amount of light? The room is still so dark with them on - I’m not sure if this is the bulb or because the bulbs are quite recessed into the ceiling? Would you recommend changing the bulb or the whole fitting? Many Thanks!!

@alincostache2750 2 жыл бұрын

Hi, I enjoyed the video,found it extremely helpful, great clip 💎, THANK YOU👍

@acspellcheque Жыл бұрын

Thanks. This video helped me immediately. You are a true g👍

@JPSElectricalServicesBristol Жыл бұрын

Thank you so much for taking the time to comment. I’m really pleased that you found my video useful. Kind regards Steve :)

@Alex-xd5ft 3 жыл бұрын

Thanks for the useful information!

@liamaddis3075 3 жыл бұрын

Cheers for this vid pal just helped me out big time 👍🏽

@JPSElectricalServicesBristol 3 жыл бұрын

You are most welcome. Thank you for taking the time to comment and show your appreciation. Kind regards Steve :)

@cha2k12 Жыл бұрын

Hi Steve , when you first said you just pinch it in as if it was easy as that I thought this fella is a knob head , but your video really helped as I had given up trying and lost all hope

@JPSElectricalServicesBristol Жыл бұрын

Haha, thank you for taking the time to comment. I’m really pleased my video was useful 🥰👍🏼

@moayadsaeed 4 жыл бұрын

Rally good. Thank you.

@mynightoff 3 жыл бұрын

Thanks for the explanation ... the bathroom version in my home was causing some head scratching which you've solved.

@JPSElectricalServicesBristol 3 жыл бұрын

mynightoff Thank you for taking the time to comment. I’m so pleased that my video provided you with the answer you were looking for. Comments like these make it worth the time spent creating and editing the videos. Kind regards Steve :)

@richardacollings 3 жыл бұрын

Same here - many thanks

@djm5k 4 ай бұрын

Very informative video on how to replace MR-16 type bulbs in recessed Downlight fixtures. When replacing a halogen bulb with an LED version to be used with a dimmer, you might have problems with LED MR-16 low-voltage bulbs flickering at low light levels. This is usually resolved by replacing lamp transformer with one rated from 0 volts to a higher voltage since the overall load on the transformer is considerably lower with LEDs. Older transformers require a minimum load around 50 or more watts which is why an LED bulb will flicker at low light levels.

@peterberry5442 3 жыл бұрын

Thanks for video. I have. JCC1001 ceiling kitchen light which has failed: do I have to replace the entire unit as I cannot see how to change the bulb, Many thanks pete Berry Gloucester

@paulbellmedia 3 жыл бұрын

I have the type for the bathroom with the rubber seal where you need to twist anti-clokwise. I have twisted and twisted it and all it does is turn but never release - is there something else I can try?

@elizabethm5889 3 жыл бұрын

Very helpful! Thank you

@daheath7242 Жыл бұрын

Very useful video, thankyou 👍

@Supergirlasp 5 жыл бұрын

Very helpful, thank you!

@JPSElectricalServicesBristol 5 жыл бұрын

Alia Price Thank You so much for taking the time to comment. It’s replies such as these that makes it worth taking the time to help. Kind regards Steve 😍👍🏼

@Suzy-sp8lv 2 жыл бұрын

Thanks perfect instructions good job you mentioned the springs ouch 😣😊

@JPSElectricalServicesBristol 2 жыл бұрын

Thank you for taking the time to comment. I’m really pleased you found my video useful. Kind regards Steve :)

@juliekeithreeves2602 3 жыл бұрын

Hi Steve, Thanks for your Video, I think it's resolved something in my head in that one of our kitchen lights is not working possibly because the transformer has failed especially as when I swap it for another in the room the non working "bulb" works again so I'll look into sourcing one of these It's an Enlite EN-PL06B/30. Also (a very minor point) you are softly spoken and the bits that are spliced in afterwards are much louder. Oh, and although I knew what to expect, the spring mechanism still whacked me when I was taking one of them out!!!

@JPSElectricalServicesBristol 3 жыл бұрын

Thank you for your positive feedback regarding the volume. This is something that I will look into. I’m sorry to hear that you managed to catch your fingers. It still happens to myself on occasions and it’s a painful reminder of my error each time! 🤣 It does sound very likely that you have a failed transformer. I think I may need to do a video in this alone. Kind regards Steve :)

@fabiandee8178 5 жыл бұрын

Excellent video

@JPSElectricalServicesBristol 5 жыл бұрын

Fabian Dee thanks for taking the time to post. Your comment is very much appreciated ☺️👍🏼

@seabadger38 11 ай бұрын

Most helpful, thank you very much.

@garyfrankel9457 2 жыл бұрын

Thank you very much for this video.

@mil3761 3 жыл бұрын

Great video, thank you

@learnmathswAaryan 8 ай бұрын

Hi. Many thanks for the video. I have an old spotlight , brand called Click. When I take it out of the ceiling the front plate just doesn’t come out like yours in the video. It remains stuck. Any ideas? Many thanks !

@JamesMasters023 3 жыл бұрын

confirming those prongs hurt. Thanks for the video!

@jac9366 2 ай бұрын

Thanks, very helpful!

@JPSElectricalServicesBristol 2 ай бұрын

I’m so pleased you found my video helpful. Kind regards Steve :)

@facundogoya Жыл бұрын

Hello, why don't you use lamps with a gu10 socket? Could you explain the difference and which one do you consider more convenient?

@secretsymphony 4 жыл бұрын

Thanks, very helpful.

@JPSElectricalServicesBristol 4 жыл бұрын

secretsymphony I’m so pleased you found this useful. I appreciate you taking the time to let me know. Many thanks Steve ☺️

@annabamford5627 3 жыл бұрын

Really helpful. Thanks 👍

@JPSElectricalServicesBristol 3 жыл бұрын

Thank you for taking the time to show to comment. I’m pleased this video helped you. Kind regards Steve :)

@erikalipeikyte1179 2 жыл бұрын

really useful thank you

@omfgsai 6 жыл бұрын

Informative video 👍

@JPSElectricalServicesBristol 6 жыл бұрын

adam yu, thank you. I’m pleased you thought so ☺️👍🏼

@SH-lb9rr 4 жыл бұрын

Excellent video thanks. Went to replace our bulb which has one of the screw release fittings but the screw won’t turn (don’t know if it was cross threaded or seized up??). Any advice how to tackle this? Thanks 👍

@JPSElectricalServicesBristol 4 жыл бұрын

Stephen Humphreys, thank you for taking the time to comment. There is a possibility that the thread is aluminium and could have stripped due to being over tightened. If it’s just a seized thread and a halogen light bulb is being used then you could turn the power off, remove the unit from the ceiling completely and then after turning the power back on ,run the light up to temperature. Turn the power off again and using something that will protect your hands from the heat try unscrewing the thread again. The heat from the halogen light bulb could be enough to make the unit expand and allow the thread to turn. If this does not work then you may need to cut your losses and source a replacement. Please let me know how you get on. Kind regards Steve :)

@ShirazEsat 2 жыл бұрын

Thanks! I just couldn't find any guidance for the over-shower lamps

@neillambton4065 Жыл бұрын

Hi Steve, yes, i found it useful, BUT, ours are a different make, and the bulbs don`t seem to want to come out. We have "ENLITE EN-BZE8" which has a "bayonette" type bezel, which comes off easily, but i can`t work out how the actual bulb comes out?. Also, do you know if these are the mains power, or low voltage variants?. We have 4 in our bathroom, and one has started intermitent flashing on and off, could it be a transformer type, and the transformer is faulty?.

@migounane7162 Жыл бұрын

Thanks for sharing

@Bzz22 2 жыл бұрын

Hi great video, are the light fitting shown in the video considered enclosed. Only I’ve just bought some LED lamps that say do not use in the enclosed light fitting. I have light fitting that resemble the ones in the video fire rated which are vented round the top , it doesn’t say if they are or not an enclosed fitting . Any information would be appreciated Thanks .

@JPSElectricalServicesBristol 2 жыл бұрын

Hi John, Thank you for taking the time to comment on my video. Could you possibly send me a photo of the exact wording and a photo of the markings on the side of the unit please. steve@jpselectricalservices.co.uk Kind regards Steve

@DadsAnime Жыл бұрын

In my bathroom there's one like you showed above the shower (as you said is common in most bathrooms) and on the other side one with no glass protector that's attached to a rod shaped transformer. It was like that when we moved in just not sure if there should be a glass protector on that one as well to protect the wires from steam and condensation

@JPSElectricalServicesBristol Жыл бұрын

Hi, Thank you for taking the time to comment. I would always suggest that an appropriately rated lamp/enclosure is installed within a bathroom where there is steam, water and humidity. If the light is above 2.25metres then technically, this is what is referred to as outside of the zones so it doesn't present a safety risk. That being said, if it's open to the elements expected to be present in a bathroom then it's not suitable to the environment that it has been installed within. I hope this helps. kind regards Steve :)

@DadsAnime Жыл бұрын

@JPS Electrical Services Yes, very helpful. Thanks for taking the time to get back to me. 👌👌👌👍

@davidrugman7910 3 жыл бұрын

Hi Steve, Thank you for the video, very useful. I've got several of the version you talked through at 2:30. Some are impossible to twist anti-clockwise others are fine. Do you have any tips to unscrew the difficult lids? I think it's something to do with the rubber ring? Thank you, David.

@JPSElectricalServicesBristol 2 жыл бұрын

Hi David, Thank you for commenting and apologies for the delay in my reply. If the lights have had Halogen lamps installed then I have seen in a few situations where the units have become so hot that they have warped. Are these particular lights installed within a bathroom?

@ShirazEsat 2 жыл бұрын

@@JPSElectricalServicesBristol I have exactly the same situation. In the bathroom, with the rubber seal, and no movement at all when trying to twist anti-clockwise

@SaxJockey 2 жыл бұрын

@@ShirazEsat Maybe they have been overtightened (locked by the compressed seal), or maybe some corrosion on the threaded parts?

@SaxJockey 2 жыл бұрын

Yes, a very useful video, Thank You. I also have fittings similar to those at 2:30. They differ slightly, the GU10 lamp does not drop down, so have to turn the lamp anticlockwise while in position...which is fiddly; but works OK.

@karengorman9671 2 жыл бұрын

@@SaxJockey '

@ameerahme 3 жыл бұрын

How is a spotlight fit into ceiling changed that can't have the bulb removed once fixed into place, as looking to fix some in bathroom but can't find any that are ip65 and changeable easily. Afraid it will ruin the plasterboard ceiling if the light fails and the the whole spotlight needs to be removed in order to change the bulb itself.

@heathermaude8969 2 жыл бұрын

Thank you - so helpful. Now I don't need to call anyone to change out the bulbs

@PlymouthSparky 6 жыл бұрын

Thanks Steve for this how to. Many a black thumbnail from the spring backs😂

@JPSElectricalServicesBristol 6 жыл бұрын

Plymouth Sparky Thanks 😁 I caught myself an absolute peach the other day. Just as well the Property was empty is all I’ll say. I found a stubborn unit, so more concentration went to trying not to damage the ceiling and then before I had time to consider my fingers it had popped out and caught the backs of my fingers on both hands 🤣👍🏼

@send2gl 3 жыл бұрын

Yep, me too.

@lezabaldwin3776 21 күн бұрын

Hi This is a really useful video but the fitting I have is in like a sealed unit are you able to advise I can send a photo.. 😁😁

@MrAas41 3 жыл бұрын

hey, great video. could you do a video on how to run twin and earth through joists (best way to drill the joist) for downlights. cheers!

@JPSElectricalServicesBristol 3 жыл бұрын

That’s not a bad idea. Thank you for taking the time to mention it. Kind regards Steve :)

@kinocchio Жыл бұрын

Thanks for the video. I still can't seem to change the bulb. I've got those spring clips holding the fitting in the wall. I partially yanked it out put I can't seem to open the thing to remove the bulb.

@JPSElectricalServicesBristol Жыл бұрын

Thanks for taking the time to comment. Some of the newer versions of a recessed downlight are now integrated units. This means that the lights inside are not replaceable. If you go through to my website and complete the contact form, you can email me a photo and I’ll be able to assist you further. Kind regards Steve www.jpselectricalservices.co.uk

@fabiandee8178 4 жыл бұрын

good video. it would be nice if you could get your whole hand up their into the ceiling to grab the main body of the light when you twisted the bezel!

@JPSElectricalServicesBristol 4 жыл бұрын

Fabian Dee thanks for taking the time to comment. I must agree, that would make my life SOOO much easier ☺️👍🏼

@TheOpenmindStudio Жыл бұрын

I have one that has metal 'teeth' all around the edges of the gu10, and I can't seem to push, twist, turn or do anything with them - any ideas?

@hardi888 4 жыл бұрын

Same here with the bulb changing forgot how they open and 2nd one you demonstrate is the one we have... no lights broken, one light bulb changed :)

@JPSElectricalServicesBristol 4 жыл бұрын

InSuperCarNation thank you for taking the time to comment. I’m so pleased that my video was able to help remind you. Well done ☺️👍🏼

@dubjay1981 3 жыл бұрын

Hi, I’ve got a JC94174 in my en-suite. After a struggle getting it out with those clasps I can’t get the face fitting off to get to the bulb...any advice?? 🤦‍♂️

@JPSElectricalServicesBristol 3 жыл бұрын

Hi dubjay1981. thank you for your question. Some newer units come as an integrated lamp. This means that the entire unit needs to be replaced. The light bulb is not accessible. Can you send me a photo of the light so that I can confirm if this is the case please. You can make contact through my website www.jpselectricalservices.co.uk Kind regards Steve :)

@william8108 4 жыл бұрын

Hi Steve,What diameter does the twin and earth cable have to be when fitting the latest Led downlights?Thanks.

@JPSElectricalServicesBristol 4 жыл бұрын

William thanks for taking the time to post your question. There are a number different factors that need to be taken into consideration before selecting a cable. If you are unsure then please get in touch with your local electrician and they will be happy to advise you of how best to proceed. I’m sure you understand that is impossible to advise you in this situation due to not knowing the installation and the external influences etc. Kind regards Steve :)

@richard-ij2fm 10 ай бұрын

Thank you.

@amysquie 2 жыл бұрын

All very well sat at a table and you can grip the holder, what do you do when the holder is stuck in the recess so you can't grip and twist? We've tried a sucker to grip the bulb as we push it but the holder just twists with it.

@JPSElectricalServicesBristol 2 жыл бұрын

Hi Amy, thank you for taking the the time to comment. It sounds like you need to call someone in to assist you further. Kind regards Steve :)

@donny6033 Жыл бұрын

Thanks mate

@karhukivi 8 ай бұрын

I find when I replace some spots with an LED bulb, the spring clip won't go back into the groove without considerable force. They look identical so what can the problem be?

@dolantwins101_x5 3 ай бұрын

Thanks Steve. We have the low voltage ‘pin’ type in our kitchen. They are so temperamental. I think the transformers are ok as when I wiggle them the light does work. You drop it back in the recess fitting and it often goes off after 10 mins or so. Could It be the pin type light. I wondered if I could change the config to the other version (insert and twiest type) or would the voltages be all wrong? Thanks if you can help. Todd

@JPSElectricalServicesBristol 3 ай бұрын

Thank you for taking the time to comment. If you're having issues with a light that uses a transformer then I would definitely start looking at replacing them for a 230V unit and GU10 lamp. They're far more reliable. How many are in the room? With regards to the intermittent issue you are having, sometimes the lamp holder wires fail, especially where halogen lamps have been in use. In this case you would need to replace the lamp holder ***Remember that the electricity supply should be isolated if you attempt this task yourself*** This link will provide you with reference to the part I am referring to. You can get these at all decent electrical wholesalers and I would recommend that you try a local independent establishment before using the chains such as shown in the link. www.toolstation.com/spare-lampholder/p99286?gad_source=1&gclid=Cj0KCQjw2a6wBhCVARIsABPeH1t2f_UrGIIgk54in2mips_hhPTvxcqtoqmDHwj4bBSGxbwaJVlgNLsaAlHeEALw_wcB&gclsrc=aw.ds I hope this helps. Kind regards Steve :)

@dolantwins101_x5 3 ай бұрын

Thank you so much Steve. I’ll digest fully later. Thanks again

@JPSElectricalServicesBristol 3 ай бұрын

@@dolantwins101_x5 if you have any further questions then feel free to reply here. I'm always happy to help. Kind regards Steve :)

@dolantwins101_x5 3 ай бұрын

I have quite a few to replace. 8 in one area (kitchen) and 7 in the other area. I’d imagine these are on separate feeds as they have different switches. Feels like a big job to me 😢

@tobs7968 5 жыл бұрын

Thanks..!!!!!!!!

@DunelmVideo 4 жыл бұрын

Any suggestions on getting the can out of the ceiling? Those pesky springs are TOO fierce. Also found the 2-pin low voltage cable fails at the back of the socket. Poor design?

@JPSElectricalServicesBristol 4 жыл бұрын

Dunelm Video thanks for taking the time to comment. Those clips are savage aren’t they! The plan should be to tilt the light and bring one spring clip out first and then the other one. Take your time and once the spring clip becomes visible, hold it back so that it cannot spring shut. With regards to the lamp holders, they can fail due to excessive use with halogen lamps. Pop to your local TLC Wholesaler and ask for their upgrade version. I hope this helps, please let me know how you get on. Kind regards Steve :)

@DunelmVideo 4 жыл бұрын

Great video, incidentally. Heaved the can out without getting mouse-trapped!

@JPSElectricalServicesBristol 4 жыл бұрын

Dunelm Video that’s fantastic news, well done ☺️👍🏼

@RobbieM72 6 ай бұрын

Is it ok to change the bulb Just by switching of the light or turn off power at the fuse box? Thanks

@JPSElectricalServicesBristol 6 ай бұрын

If there are other lights still working and you can see that they have gone off when the switch is operated then you can proceed with changing the bulb. If in doubt, turn the power off at the fuse box. Kind regards Steve 🙂👍🏼

@jogon2140 Жыл бұрын

Not sure if I'm right but certain types of downlight once light bulb goes the whole unit needs to be replaced. I have a Luceco ftype f600

@JPSElectricalServicesBristol Жыл бұрын

Hi, thanks for taking the time to comment. You are correct. Since creating this video, integrated downlights have become a very common application. Personally, wherever possible, I try to avoid using them. LED lighting still isn’t as great as some manufacturers make out. This becomes an issue when an integrated lamp fails because the homeowner isn’t usually able to replace the entire unit because it’s connected to the electrical cables. A lamp however, can be easily replaced by most… when they know how 🥰👍🏼 Kind regards Steve :)

@DrBroncanuus Жыл бұрын

I've got a semi-circular spring clip which i have no idea how it secures the bulb ?

@JPSElectricalServicesBristol Жыл бұрын

Thank you for taking the time to comment. With the light bulb connected to the light and pushed up into its housing, the semi circular clip sits between the light bulb and the bezel (outer surround) of the light. The circular spring clip will be angled outwards on each end. This is so that you can pinch the clip (angle facing towards you) closed so that it will slot into place. I hope this helps. Kind regards Steve :)

@DrBroncanuus Жыл бұрын

@@JPSElectricalServicesBristol thank you will now attempt to refit bulb...

@Mass1987 6 ай бұрын

Thanks for the hell with clip style ones

@JPSElectricalServicesBristol 6 ай бұрын

I’m pleased you found my video useful. Kind regards Steve :)

@GiuseppeCasey Жыл бұрын

Just watched this video too late. Finger eaten by the mousetrap! Thanks for the information though I was about to give up figuring out how to unscrew it.

@SeedsyTV 15 күн бұрын

thanks g

@kila_whale 4 жыл бұрын

I've been trying to twist anti-clockwise above the shower one and it won't just open. Any tips mate? It's so frustrating, might end up calling an electrician.

@JPSElectricalServicesBristol 4 жыл бұрын

Tanim Ahmad thanks for taking the time to comment. Some LED recessed downlights are a completely sealed unit and the lamp cannot be removed. Some can just be stubborn. Please feel free to use the contact form on my website and I’ll reply requesting a photo of the unit. From this I should be able to determine if it is replaceable or sealed. Kind regards Steve - www.jpselectricalservices.co.uk

@kila_whale 4 жыл бұрын

@@JPSElectricalServicesBristol You Sir are an absolute star!! Thank you, I'll send the picture over. 😊

@matthewlewis2072 3 жыл бұрын

Lush West Country accent. Good vid.

@JPSElectricalServicesBristol 3 жыл бұрын

Haha, thank you Matthew. I’m from Weston super-Mare originally but lived in South Bristol for the last 14 years so there’s no denying that I must have quite a twang by now 😁👍🏼 Thank you for taking the time to comment, every single one makes me realise that there are so many people viewing these videos that appreciate my efforts 🙂

@send2gl 3 жыл бұрын

Yes, can confirm those springs do bite. Puzzled about people saying LEDs save energy over halogen. My kitchen has 8 12V 50W halogens. 400W at 12V, does that not convert roughly to 20W at 230 volts? Eight LEDs at about 5W each is double what the halogens use, or have I got the maths wrong? Appreciate the LEDs run much cooler.

@karlotto1561 3 жыл бұрын

10/10

@scorpionnetherrealm8937 4 жыл бұрын

Hi stevie hope you are well. I have spot lights bog standard but want to replace them with the ip65 for a bathroom. I have 7 to change. Could you tell me how much would i be looking to pay to rectify a job i had done over a decade ago by a pro. I would love to recieve a reply. Stay safe

@JPSElectricalServicesBristol 4 жыл бұрын

scorpion netherrealm Thanks you for taking the time to comment. This is a very interesting question that I would love to help you have answered. First off, where in the World/Country are you please? I look forward to hearing from you. Kind regards Steve :)

@scorpionnetherrealm8937 4 жыл бұрын

@@JPSElectricalServicesBristol manchester uk england

@scorpionnetherrealm8937 4 жыл бұрын

Any luck?

@JPSElectricalServicesBristol 4 жыл бұрын

scorpion netherrealm Give Adam at South Manchester Electrical a call. If he does not cover your area then I’m sure he will know an electrician who does. He too has a KZfaq channel. I hope this helps. Kind regards Steve :)

@JPSElectricalServicesBristol 4 жыл бұрын

scorpion netherrealm www.google.co.uk/search?q=south+manchester+electrical&ie=UTF-8&oe=UTF-8&hl=en-gb&client=safari

@laura_000 3 жыл бұрын

What if you can’t twist and there’s no metal ring? 😫😫I have the one that you can move the direction of bulb slightly, but there’s no way of actually removing the LED light...🥺

@JPSElectricalServicesBristol 3 жыл бұрын

Thank you for taking the time to comment. If your fitting had an integrated LED installed then the entire unit will need to be replaced. It’s for this reason that I try to avoid installing integrated units. I hope this helps. Kind regards Steve :)

@matiasbascunan77 2 ай бұрын

I’m having trouble with mine it’s doesn’t come apart and entire thing is metal

@JPSElectricalServicesBristol 2 ай бұрын

Since creating this video and LED lights evolving, many recessed downlights have been manufactured in a way that integrates the unit and the lamp. This means that if the light fails, the whole unit needs to be replaced. I really do dislike these units but even I opt to install them on occasions where the installation dictates that particular design is the best option. I hope this helps. Kind regards Steve :)

@RossPatzelt 5 ай бұрын

music comes in really loud on the logo but thanks for the video

@JPSElectricalServicesBristol 5 ай бұрын

Thank you for the heads-up. It seems that there are a number of viewers experiencing different issues with the volume. Some say they can't hear it, others say certain parts are too loud. I think it's likely platform or computer setting differences amongst users? I hope the video was useful. Kind regards Steve :)

@melanieeaton2626 3 жыл бұрын

Having problems 1-getting the fixing down without taking off the ceiling plaster and 2- the small ceramic white fixing circle is broken

@JPSElectricalServicesBristol 3 жыл бұрын

Thanks for taking the time to get in touch. Please feel free to contact me through my website. The enquiry form allows you to attach photos. I’ll see if there is any advice that I can provide. Kind regards Steve :)

@sonix5472 3 жыл бұрын

For the spring clip type kzfaq.info/get/bejne/as6Hnaaar9vFpXU.html I've found you need to set the bulb in place inside the fitting then push the spring clip until it clicks into place then screw on the outer plate. If you haven't put the spring in place properly the plate will not srew onto the thread.

@suedonym55 3 жыл бұрын

argh we've got older style gu10 mains fitted lights in the bathroom, no clips, not twistable, won't budge in any direction, any ideas? Help!!!!

@JPSElectricalServicesBristol 3 жыл бұрын

Thank you for taking the time to comment. If your units are using the old style halogen lamps then there is a possibility that the unit itself has become warped which is preventing the light from twisting. If you would like to email me then I might be able to identify the type of unit and confirm the method of removal required. I hope this helps. Kind regards Steve :)

@viktoriakireeva5860 Жыл бұрын

I need help:((( Spend half a day watching YT videos to understand how to change my bulb. In the end I had to cut it off the ceiling because it was painted over by the builders a few years ago. I managed to get it out but now I’m stuck as I can’t figure out how to take the bulb out of its casing (or whatever it’s called)😢😢😢.

@JPSElectricalServicesBristol Жыл бұрын

Hi Viktoria, thanks for getting in touch. Please visit my website www.jpselectricalservices.co.uk and complete the contact form. It will allow you to upload a photo so that I can see exactly what the issue is. I look forward to helping you soon. Kind regards Steve :)

@viktoriakireeva5860 Жыл бұрын

@@JPSElectricalServicesBristol omg thank you so much!! Ive already done smth wrong.. I took out the whole fitting out of the ceiling🤦‍♀️🤦‍♀️🤦‍♀️ then didn’t know how to take the bulb out. Then someone told me to use a screwdriver do detach the piece which I didn’t know was detachable - and it was!! It’s hard to explain showing just a photo. I made a short video - will have to upload here, if you dont mind, would you have a look tomorrow? I’ll send a link once it’s uploaded. My question is - after I put the fitting back in, now there’s a visible gap between the ceiling and the fitting, is it ok to leave it like that? Or should I buy some sealant and cover it? And - when I touch it, it sounds scary, very loud creak or squeak. The second bulb should be easier to change since I already know how it works.. although I’m scared of electricity 😳😳😳 Thank you ever so much for replying and offering to upload a photo!

@viktoriakireeva5860 Жыл бұрын

Good morning Steve, I have just uploaded the video, I made it as short as possible and sped up. I seem to have destroyed the integrity of the ceiling.. Do you think I should book a professional person to redo the job? I have to change another light and I’m scared to even touch it after this😳 kzfaq.info/get/bejne/ZpyYnJqjqKmccac.html