How To Replace a Countershaft Seal on a Dirt Bike

Рет қаралды 174,281

Күн бұрын

Counter Shaft Seal Replacement Parts & Tools:
www.rockymountainatvmc.com/Sa...
Your dirt bike’s engine is intricately designed, with every piece performing a specific job to keep the machine operating as intended. Any engine component which is no longer functioning correctly can mess up an entire day’s off-road adventure. In this video we demonstrate how to successfully replace a leaky countershaft seal on a dirt bike.
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?...

Пікірлер: 95

@fishtailfred8686 3 жыл бұрын

Thanks for making the video, I could not figure out which way to orient the recess on the bushing and you took the time to point this out in your video.

@connerjorgensen2013 5 жыл бұрын

Could you guys do a video/ show more about that light bar setup? That is totally awesome and I’ve thought of using the Tusk light bar for that. Thanks!

@ernieengineer3462 3 жыл бұрын

Excellent video. One of the best demonstration videos I’ve seen. Thanks for posting!

@thehungryhunter3454 2 жыл бұрын

Excellent video and great products thanks guys!

@lukemadsen7254 6 жыл бұрын

Thanks, for the great vid. Im going to do this on my ktm 85 because it leaks.

@SweenOTheMartyr 4 жыл бұрын

Really helpful buddy here from london uk

@edilsonfaberruizrivera7262 6 ай бұрын

As Usual ,GREAT VIDEO, THANKS MAN

@andyostertag 4 жыл бұрын

Thank you

@CA-zs5cr 4 жыл бұрын

👍👌😎 Excellent! Thanks for sharing

@robertbarger6439 5 жыл бұрын

Thanks kx 450 did this yesterday

@bwooters8227 2 жыл бұрын

Have you ever done this on a banshee? Is it similar to this? Have on leaking and i believe its coming from behind sprocket I’m also going to replace shift shaft seal when doing it

@alloutmoving1564 8 ай бұрын

Good morning and thank you for the great video. I guess I got a little carried away when trying to put the seal back in and ended up damaging the case. My question.. Does the seal ride along a race that can be replaced or did I damage the actual case? Either way I can’t find the race or information about it. (2004 KTM 250sx)

@connersnow298 2 жыл бұрын

Awesome vid

@doublex632 5 жыл бұрын

Hi, thanks for this video, excellent as always. I have a 99 KX250, says there's two o-rings, where does the other one go? do i just slide the other one after the first one that's in that groove? I cant seem to find any information even in the service manual. thanks

@blazers12369 2 жыл бұрын

I have an 01 kx250 I plan to do this on. Did you find out?

@hectical_skidrig406 3 ай бұрын

can you use a drill and screw like with the shift shaft seal?

@mattaustin4663 5 жыл бұрын

Is it the same procedure on a ktm 50 senior. I have a 2014 leaking quite badly

@john-paulstone791 26 күн бұрын

I replaced mine with an allballs kit and took advice to grease it all up first. The grease caused it to leak when riding, I had to clean it all off.

@hrsey71 4 жыл бұрын

I pushed the countershaft seal in a little past "flush with the case".. will that hurt anything?

@user-mx9ps8tb6y 3 ай бұрын

Nice

@TBuilds888 4 жыл бұрын

Some bikes like the 2011 kx250f u put the sprocket spacer in first

@sutomokhosasie3436 2 жыл бұрын

Mine is gasgas 300 gp 2018 and the bushing won't get out. How tips to take out the bushing. Thx alot

@tommywallbanger 3 жыл бұрын

If you still get a leak after replacing the seal and you have to use the bigger O-Ring, can you take the old O-ring off and put the new one on without taking the seal off?

@timfagan816 6 жыл бұрын

Counter shaft seal puller. $44 in America. $119 in New Zealand. What a joke.

@andyirwin2559 Жыл бұрын

can u change to a thicker o ring without removing the seal?

@coyote_450f 4 жыл бұрын

thats kinda crazy how its only a snap ring holding on the sprocket. you know the thing that you rely on to move the machine.

@albertocason3564 3 жыл бұрын

Pro trick : you can watch movies at Flixzone. Been using it for watching all kinds of movies these days.

@brettjuelz2373 3 жыл бұрын

@Alberto Cason definitely, I have been using flixzone} for since december myself =)

@jaydenfrank6925 3 жыл бұрын

@Alberto Cason Definitely, have been using flixzone} for years myself =)

@ShadowgamerRS 2 жыл бұрын

Interesting that you say that. Got home this afternoon and oil was pissing out of ky sprocket. Opened it up and the seal somehow pulled in front of the snap ring and now I'm figuring out how to get the seal out without speciality tools. 😅

@raptormx9502 5 жыл бұрын

when i get the two seals can i just use the thicker seal so i know for sure it won't leak?

@hrsey71 4 жыл бұрын

all balls recommends this.

@WillyD1 Жыл бұрын

The sprocket bolts break all the time it’s bull red lock tight with a junk metal bolt and if your lucky enough to get it out you should use a new bolt it will come with red lock tight on it brush it off and use blue so it comes off easier next time I wish I had the nut like yours does instead of the bolt

@rowancorry6330 5 жыл бұрын

Rmx450z seal wouldn't come off with tool just ripped seal and seal is stuck on good. Any ideas how to remove seal? Also rmx450z have 2 oring seals.

@lancz1977 3 жыл бұрын

Drill a screw in a little bit and pull off with Channels twist and pull

@markuswiens9028 4 жыл бұрын

Is it bad if the seal is pressed all the way in ?

@bartjar2 9 ай бұрын

What kind of Slave cylinder is the purple one on this bike? Just wondering if someone besides rekluse is making an adjustable slave cylinder.

@rmatvmc 9 ай бұрын

That is a slave cylinder guard from Enduro Engineering.

@surfnskate1147 6 жыл бұрын

Might be a dumb question but if I had a bad seal, would the sprocket have to be spinning in order to leak? I’ve whipped everything down and let the bike idle for a while and it’s dry as a whistle, do you think I’m good to go?

@rmatvmc 6 жыл бұрын

*Cameron* Sometimes, yes. Seals aren't too pricey. It's best to simply replace the countershaft shaft seal and clean and inspect your countershaft.

@surfnskate1147 6 жыл бұрын

Rocky Mountain ATV MC thank you!

@slapthemat 5 жыл бұрын

Do you need to drain the oil beforehand?

@rmatvmc 5 жыл бұрын

Its not necessary, you'll probably have a little more oil come out while doing this job if its not drained. You can also lean the bike over a bit when you're changing it and you shouldn't lose very much oil that way either. Thanks for watching!

@danosullivan2313 6 жыл бұрын

Do you know were I can get a husquvarna tc 85 bar pad

@lukemadsen7254 6 жыл бұрын

you can get oem or aftermarket bar pads from rocky mountain.

@claytonhertz251 5 жыл бұрын

Instead of using the Motion pro seal remover, will the Tusk bearing remover kit work instead? I already have that kit and won’t want to buy the Motion Pro if I don’t have to. Thanks!

@rmatvmc 5 жыл бұрын

*Clayton Hertz* If you have it, it's worth trying. I'm worried the Tusk tool won't clear around the countershaft? That is my concern.

@pennedaizee 6 жыл бұрын

Great video, Never had to do this before on my Honda's, Yamaha's or Suzuki's. This must be a repair very specific to KTM.😬

@natural5015 6 жыл бұрын

LOL

@mrcapsicum739 5 жыл бұрын

Paul Claverie currently doing it on my Honda crf250x😬

@TheAngeloakers 5 жыл бұрын

My Kawasaki just did it

@SweenOTheMartyr 4 жыл бұрын

Mine leaking on my 2004 honda but shes an old girl

@SweenOTheMartyr 4 жыл бұрын

@@mrcapsicum739 how did it go mate I got the same bike

@bigchungus2493 4 жыл бұрын

My dirt bike has an oil leak from near the front sprocket, however it is engine oil leaking out of it. Is it still the countershaft seal? Bike is a 2007 crf450r.

@travisk1487 3 жыл бұрын

lol that is a big misconception on these bikes. the "Transmission oil" is in reality engine oil. there isnt a seperate pan for it like in cars. it is all the same. if it has oil coming out. it is your countershaft seal.

@StrykerV8 2 жыл бұрын

@@travisk1487 actually they are separate on certain crf450s

@Xiferr 2 жыл бұрын

@@StrykerV8 i was referencing the 2 strokes but yea true

@Carter124 7 ай бұрын

My countershaft seal is tough to put on any tips?

@rmatvmc 7 ай бұрын

Make sure you have the correct seal by matching it up with the old seal. Once you've done that, grease the inside and outside of the seal and try using a bit of heat on the case where the seal will go. Also, check that your socket you're using to drive in the seal is sized properly and isn't hitting on the countershaft or the case.

@jaydencombs85 9 ай бұрын

Does it make a noise when it goes bad?

@rmatvmc 9 ай бұрын

No, you will just notice oil leaking from the countershaft.

@zuimmy2043 4 жыл бұрын

This happened on my ttr 125 and all the oil drained out completely, where am I supposed to buy the seal?

@rmatvmc 4 жыл бұрын

You will want to check the OEM parts for the correct countershaft seal. Here's a link to the Yamaha OEM parts finder: www.rockymountainatvmc.com/oem-parts/Yamaha

@tiaanbotha5461 5 жыл бұрын

hi is it necessary to change it

@rmatvmc 5 жыл бұрын

If it isn't leaking, it's not necessary to replace. Thanks for watching!

@downwiththegreensmanj7240 5 жыл бұрын

It depends on how much it's leaking, I've been letting my going for a while it's rust protection🤣🤣

@jayinla228 Жыл бұрын

transmission oil?

@rmatvmc Жыл бұрын

What about it?

@zuimmy2043 4 жыл бұрын

Hard to change the seal when your website doesn’t carry 1988 kx125 seals

@rmatvmc 4 жыл бұрын

We carry the OEM Kawasaki counter shaft o-ring if you check our OEM parts finder. The part number should be 92055-022. Here's a link to our OEM parts: www.rockymountainatvmc.com/oem-parts/Kawasaki

@zuimmy2043 4 жыл бұрын

Rocky Mountain ATV MC I need the whole parts set with the seal and o ring

@eclipsegaming6959 5 жыл бұрын

Omg my 2015 yz250f was leaking a lot of oil took off the sprocket and no outer seal wtf

@codenamenoob4973 4 жыл бұрын

That would do it 🤦

@gageevans6165 5 жыл бұрын

Is it normal for the counter shaft to move forward and back if you know what I mean?

@cheezedoodle8356 5 жыл бұрын

just replaced the seal on mine and noticed the shaft had around an 1/8 inch wiggle room forwards and backwards as well. Seems to be normal and it all tightens up and pulls the shaft all the way out when you install the sprocket and nut back on the end of it.

@gageevans6165 5 жыл бұрын

@@cheezedoodle8356 okay thank you

@anzedelopst5656 6 жыл бұрын

why you use grease instead of oil?

@rmatvmc 6 жыл бұрын

Manufacturers typically call for grease on seals. I think it lubricates better and longer to help the seal seat to the surface.

@carlosalfonsoadame6694 6 жыл бұрын

54 pounds good

@dairyinn7083 4 жыл бұрын

I’ve tried 100 different methods and I can’t get mine out

@backcountry4life 7 ай бұрын

Super helpful video. My only advice though is to never buy an aftermarket o-ring. Buy the OEM o-ring from the bike Mfr. It'll save the hassle of repeating the process. It's just not worth trying to 'figure out' the right o-ring dimensions on aftermarket.

@napper1496 7 ай бұрын

A seal removal tool to remove then a socket to put one in 😂😂

@ohnegative9526 4 жыл бұрын

Dude WTF happened to your clutch slave!?>!?!

@rmatvmc 4 жыл бұрын

ha ha ha! IDK Chancelor, what happened!? - Wes

@syndicatemotos7534 3 жыл бұрын

Instructions not clear started bike and oil started pouring out. Video rate 3/10 Bent the seal putting it in 🥲

@williamschuman4951 11 ай бұрын

I hope you read this, on my 07 KX 450F the collar that slips over the shaft is absolutely frozen on the shaft, will not even budge I tried everything tapping it in all directions trying to loosen it up, it’s stuck Any Suggestions, thanks for your time, Will.

@rmatvmc 11 ай бұрын

Try using some penetrating oil and let it soak for a while. Then try tapping on it in all directions again.

@markuswiens9028 4 жыл бұрын

Is it bad if the seal is pressed all the way in ?

@rmatvmc 4 жыл бұрын

Not sure what you mean by "all the way" but the seal should be pressed in until it's flush with the outside of the engine case like shown here at 5:30.

@hrsey71 4 жыл бұрын

@@rmatvmc he means pressed in further than "flush with the case". I did the same thing. its a little past flush