How to Replace a Door Seal on a Bush Washing Machine

Рет қаралды 32,484

Күн бұрын

this time i show you how to replace a door seal on a vestel made bush washing machine, including dismantling, removing the seal, refitting and reassembly
this may not apply to all models as some do vary slightly, but its mostly the same
Don't forget to LIKE, SUBSCRIBE, & hit the BELL for future upload notifications, and if you want to support the channel further you can donate here:
paypal.me/servisslimline?loca...
Join the channel here & get bonus extras: / @servisslimline
Please take a look at my amazon wish list:
www.amazon.co.uk/hz/wishlist/...

Пікірлер: 50

@ChristianHodgson 20 күн бұрын

Got this exact machine , struggled for ages before finding this. New front clamp is slightly bigger than the old one with a longer spring. Thanks for the video

@DianneWithaT 2 ай бұрын

Thank you so much my Bush washer dryer is slightly different but this video got me in the ball park and saved me a lots of money.. my husband was very impressed as he was prepared to buy a new one. Thank you again

@liammccormack7894 24 күн бұрын

Perfect advice for me.....thanks

@alyxridgway5039 9 ай бұрын

This video literally saved me from buying a new washing machine, bought the seal and replaced it with the help of this video, amazing 🎉

@peterjames1258 Жыл бұрын

Thank you. I have an almost identical AEG L81400, in Canada, which is also a rebadged Vestel machine. Helpful description of how to open-up the front panel.

@louisefraser1959 2 жыл бұрын

Just helped me fix the seal of my machine. Didn't fit a new one just reset the old one back to where it should be and fix the retaining spring. Washing machine isn't old so hopefully this will buy me more time as taking the whole front end off I couldn't do. So thank you

@leecleaton3068 Жыл бұрын

My washing machine wasn't draining properly, and I accidentally pulled the door seal out. Followed your advice to refit seal and removed 'a sock' from the tube near the filter underneath while doing so. I tilt my hat to you, saved me waiting for a call out and and paying for one. Cheers thanks very much 👍

@josyjacob1517 14 күн бұрын

Thanks, It really helped.

@jackhtfc2010 Жыл бұрын

Great video, followed every step and managed to change the seal with ease 👍 thanks very much

@suuii5871 3 жыл бұрын

Thank you. I managed to get a seal from Amazon and thanks to your Chanel I am confident to fix it my self brilliant thanks

@hinchliffe2258 Жыл бұрын

Thanks mate. Very helpful.

@olliebeck2952 2 жыл бұрын

Just want to say thanks. Followed this to the letter and managed to complete the repair in just under an hour and a half on my Bush machine. These types of videos don't get the credit they deserve, really clear. Cheers 🍺

@TheBigLezFanChannel Жыл бұрын

Very helpful, thank you!

@leetigger8443 2 жыл бұрын

Big help - thank you very much!

@philwright7895 3 жыл бұрын

Great video, thanks

@andyharry785 2 жыл бұрын

Thanks mate…. Worked a treat.

@thinker........ 2 жыл бұрын

You saved me from buying a new washing machine.. 👍. But the way, anyone who finds it difficult to put the seal on. Always start from the bottom and then slowly to the top..

@shirleymclean5895 2 жыл бұрын

Size 20 torx screw driver needed - will do the job!

@jeremykemp3782 2 жыл бұрын

I need to do my son's tomorrow. Wish me luck and thank you

@lilycatgamer 3 жыл бұрын

Very helpful mate, thanks!

@vickiwarner7628 2 жыл бұрын

Thank you, easy to follow video. Can use my machine again

@hfjhnbj 2 жыл бұрын

Really really helpful- thank you!

@isrootofalllife 3 жыл бұрын

My 4 month old door seal got damaged right that the bottom, emptied a full load of water onto the kitchen floor 😖 I was dreading changing the seal until I found your video, it’s given me 100% faith in myself to have a go at it, I’ve ordered a new one off eBay for £23, hope it’s ok 🤞 Thanks for taking time to make the video, great work mate 🤝

@isrootofalllife 3 жыл бұрын

Just wanted to feedback, with your video playing on the shelf I successfully fitted the new door seal, I did a few rewinds but got there in not too bad time 😂 And what a top tip with the washing up liquid, no way would you succeed without it👍 And that spring seal 🤦‍♂️ Anyone reading this, follow the video and save yourself quite a few quid, great tuition and top rated!!

@ThemisIsNoMore 3 жыл бұрын

Thank you so much!

@didihunt 2 жыл бұрын

Saved my ass with this vid appreciate it bud

@colin7225 Жыл бұрын

Thanks great video I got it done

@jamiepegler7851 Жыл бұрын

Job done cheers mate

@introverted.magic.shifters 3 жыл бұрын

i think vestel style machines are applied to niche brands: Montpellier Bush Vox Sharp and more....

@andyley329 3 жыл бұрын

Very helpful video👍. if i had made one it would have to be rated 18. Those bl****y springs & yep i tried it without washing liquid to start with. Many thanks

@servisslimline 3 жыл бұрын

Glad it helped 👍👍

@HooverLux 3 жыл бұрын

Great how to vid Phil, really informative, even a novice bodger like me could do that. How do you change the belt if you can’t open the back? I think a how to vid would be in order.

@servisslimline 3 жыл бұрын

Great suggestion!

@HooverLux 3 жыл бұрын

@@servisslimline you’re absolutely welcome my friend 🙏🏻

@hayleyspouge9944 2 жыл бұрын

Great video! Does anyone know what type of seal I need for this washing machine and where I can purchase it from? I don't want to get the wrong one 😅

@pauljaffasdunn276 10 ай бұрын

Hi I can't get the spring back on 😡 😭 any tips would be much appreciated

@Mjay32 Жыл бұрын

Any idea which panel needs to come off to replace the drainage pipe on this particular machine?

@servisslimline Жыл бұрын

no panels come off unless you take the front off, ypu can just unscrew the pump fom the fromt and take it out the bottom , probably easier and quicker

@afeefaanwar3868 2 жыл бұрын

Hi I’ve got a Bush WMDF814B washing machine I’ve taken all the screws you said in the video but my front panel will not come off, any ideas?

@servisslimline 2 жыл бұрын

the panel should slide down if i remember right, if all the screws are out it may just be stiff

@peterjames1258 Жыл бұрын

The front panel slides up. Don't forget to first move the dispenser out of the way. There are 3 of those locating pins each side, and it's kinda tricky to disengage them all at once!