I watched your video twice, went and bought the same products you used, went outside and repaired the hose. I am a 63 year old retired librarian, I can't wait to show my husband my handywork, THANKS to YOU!!!!!!!

Great video - well done. Direct and to the point. No intro or music or misc. talking about this and that - just the info we need. Short and sweet. Thank you !

U CAN’T EVEN IMAGINE HOW MANY HOSES I HAVE THROWN AWAY IN THE LAST 12 YEARS - THANK U SO MUCH FOR SHOWING US HOW EASY THIS IS & HOW STUPID I HAVE BEEN!!!!

I watched your video and wet to Lowes for the same part you have on yours! Yes it cost a little more than the old type, but I did it! I love it! Thank you so much! Also a lady at Lowes was going to buy a new hose! She didn’t know you could repair! She bought one of these too! Thank you for your help!

EXACTLY what I was looking for! Thank you so much for the reminder to pick up the better clamp. I ran out of them and just used the thin ring clamps I had lying around. I always cut myself, too, on those sharp ends that grow longer after they're screwed on. I once tried to snip one back and round it out -- even filed it -- but it's still in the way, so then I had to hassle around with thick outdoor tape to "pad" it. It looked ridiculous. I'm just going to mosey on over to Amazon (where else?) and buy the right one (or two). I'm a petite 68 year-old Yiayia (Greek Grandma) and still love to do all of these repairs and tinkering with gardening power equipment I built and maintain myself. I just rebuilt our old beloved 2002 John Deere LT150 lawn tractor after a head-on collision with a deck post last summer. As I always taught my now 4 grown sons, my philosophy is that, if you have the utter nerve, you can accomplish positively anything. I've always had that utter nerve (unmitigated gall?), and so I learned. Hubby just smiles and shakes his head. He's jealous... LOL!

FANTASTIC! Instead of spending $25 spent $5 & a few minutes to repair. Older & spouse limited. These vids help so much. Thank you!

Thanks - you taught me a basic skills and saved me $$$. Very nice presentation - clear, thorough, brief. Nice work!

Thank you for this. I accidentally cut the last 15 feet of my 100 foot heavy duty garden hose with the lawn tractor today (high grass) . This saves me $ compared to replacing the entire hose. Excellent instruction here!

Great video. You saved my money 💰. My hubby wanted to buy a new hose just because the end broke. It was super easy to repair and I only spent $6.

Exactly what my problem is. Thank you for the most practical and efficient solution. That pipe cutter is a great technique Thanks man!

This video is awesome! Do you have more videos? Simple, direct, clear & steady video, no bs! I loved it!

I had a hell of a time getting the brass piece down into the hose all the way. I ended up getting some coconut oil that I had in the house and coating the brass piece and then also put some down inside the hose as deep as I thought the brass piece was going to go and voila! The lubricant makes all the difference!

This is exactly what I needed to learn, and yes, I thought it was much more difficult. Thanks for making it easier.

Thank you, sir. I had no idea these existed. I have like three hoses that have the same issue and I don’t wanna buy another one this will fix my problem. thumbs way up.

Excellent. Thank you. Went online to purchase through Amazon but it would have been 2 weeks+ delivery. Went to ACE bought the same exact product, followed your lead and Voila! Thank you, thank you.

You’re “opening” was perfect. Gave me a good belly laugh! And, thank you for the info😁

Just spent less than $5 and fixed our hose in less than ten minutes. Thank you!

Just watched this and it worked. Here is my experience to help others. I got a male end by mistake. I kept it for the other end. I went back and got the female end. It's metal with stainless steel screws and is brass and the clamp is like aluminum. I used a sharp utility knife and just eyed the cut. I hacked a couple of uneven parts. I do have a PVC cutter but didn't want to dig it out. The product I bought at Ace Hardware said it would fit both size hoses. I think it's 5/ and 3/4. I used the correct size screw driver, which seems important to do, and unscrewed the sleeve. Using a cordless drill is fine for taking the screws out and putting them back in but don't use the drill with a Phillips but to do the final tightening. Use that big fat screwdriver and do the final cranking by hand. You can easily slip the screwdriver when tightening and hurt yourself. You can also strup the screws if they are cheap. As I tightened it, I eyed the gap on both sides. Making sure to alternate a little turning of each screw back and forth. Always making sure the gap of the clamps stay parallel. This is what would cause a leak along with a really bad cutting of the hose and also not lining the sleeve up in the right spot. I personally left a little gap below the insert and the sleeve but wanted to mention this little detail. I believe that's correct but tell me if I'm wrong. The gap was about 1/8 inch. In the end, no leak. One more tip, I did put the whole setup against my deck rail as I tightened the final turns. This keeps you from putting the screw driver through your hand. Lol. As for tightening, I did as much as I could just barely before the point when the screws felt like they would slip or strip. Take your time and like I said, turn one screw a little and then the other and back and forth. I think it cost about 14 bucks for all metal, which is a little high but we get a discount at Ace. If you need to do both sides, in my case, it may be best to buy a new hose.. mine is pretty strong and lives with pressure a lot and never ruptured so I wanted to salvage it. Some may want to look at the chemicals in the metal if using for drinking water. If you've been vaxed, don't waist your time though. I really hope this helps someone!

Amazon has it for $8.80, local ACE Hardware has it for $6.49. My money stays local. Thanks for the helpful video. I second the joy of your video NOT having background music.

I 🧏🏻‍♀️ thought, I was going to have to throw out a perfectly good hose? Until I saw your video. Thanks for the video! 👍🏼 You make it seem easy, and encouraging to do it myself! Also, thanks for your smooth voice, and not yelling. 😊

Very cool, I have this old hose outside the previous owner had it rigged up for watering the lawn and the end is chopped off. Thought I would throw it away, figured I’d search this. Bingo, guess I’ll put a new end on it and keep it! In the old days, I’d have to ask around if this is even possible, these day just do a quick search on youtube and figure all this stuff out. Thanks man!

It's 7:05 pm Nashville TN. Watched your video, and you were right. It was an easy fix and working fine!! Thank you so much!!!😊😊

that clamp looks so easy to installed and sturdy

Thanks for the video! I have a hose close to 10 years old and still great. The Amazon links were so helpful.

Pure genius! Thank you so much for the simple solution. I watched a few other methods and yours is definitely the best and fastest. You have done a tremendous service here sir!

Thank you for the 4 years later review! Very helpful!

Thank you for this great video. I have one of those stupid lightweight flat hoses that I do not care for that much cause they crimp too much and its annoying..... but it really is too new of a hose to replace and the metal end fell off. I cut the end as you instructed and the flat hose ending was still a little too small to fit over the brass clamp male end, so I nipped it a little on one side so I could shove the hose over it as far as I could. Then I used duct tape to secure the end of the hose around the male brass end and screwed the clamp on and voila, its not leaking and works great so far. I am using my sprinkler with it right now.

Great video,short,precise,I'm using this info to cut away the front 25 feet of rotted and kinked hose and this is the perfect solution,thx again 😃

Thanks man! I really didn't want to buy more hoses. With your tips, I not only can replace the end, I can cut the hose and create more hoses! 👍🏾

Thank you for helping a single lady out! Yay!

THANK YOU!!! I had no idea I cld fix my hose myself. Really a glad I found you, easy instructions!

I just I just watched your video, right now I’m about to fix my hose using the same products, thanks for the video 👍👍

On my way to Home Depot to pick up one of these. You did great by the way, don't sweat the camera closeness and fireworks. Thanks for the video and recommendations.

This is exactly the information I was looking for. I bought the product from your link. Thank you for your help .🙂

Easy to follow and very helpful. Saved me a lot of time. Thanks!

This is just what I needed to fix my oops of attaching the hose reel without feeding the leader hose into the base first! Thank you!!!!! I love the interwebs!

Love videos like this, just saved an expensive hose!

So, it must be the female end I need for my hose. Somehow a sprinkler attachment can't be loosened BY ME so I'm going to cut the thing plus with that section of hose and do the same thing you've done here! Really good video.

WOW......had no idea you can do that. Off to Home Depot now. Thank You so much

Just when I was about to go out and buy a new hose, thanks for the info. 👍💯

Great info and no junk clear and to the point. Thanks

Not only was this helpful and I purchase the products you have the links for but you’re funny! Thanks for making the video this is exactly what I was looking for

So the broken hose has caused drama lol . I’m so excited to do this now!! Thank you so much! I know it’s simple but I could still mess it up so lol I appreciate it 🙏🏾

Thank you! My hubby is gone and I need to get pressure washing done and needed a new hose end. Perfect!

thanks bro, dropped a like saved me money and time.

Excellent and simple fix. Easy to understand. Thank you so much! God bless. 👍

Thank you so much, I was aching over having to throw away a very good hose.

Thank u I seen them in stores never have a bad hose till just now.i should be able to find at least one around, with ur help I can fix it like a pro.

Great video - to the point. The only thing missing is seeing how it holds under water pressure. :)

Thank you so much! Really saved me 50 dollars on a new hose!

When you cut the hose and it hit the table or whatever it made a tony hawk pro skater special move sound!!

Thank you for the video! Saved my hose and a quick fix.

Really appreciate this! Thank you. You encouraged me to do it myself 💪

Wow thanks I am going to do this myself. 65 and getting younger! Lol

Thanks for this video, straight to the point and very informative ordered the part from the Amazon link thanks for that as well don't have time to be running to Lowe's and then I have the part.🤭

Can spit blood asking son to replace head hose for 3 months. Finally did it on my own watching your Video. Thanks

That looks easy. Thanks for showing me how to do it.

You are a man of the people. Need to do this soon.

Boy, this video just hosed me! Thanks...great stuff!

That's a better idea than the other hose clamp. Thank you for the model and video.

Great video. However, the end of my hose still leaked a bit around the clamp. What we did was to add a few layers of duct tape around the hose underneath the clamp and that was enough for a good seal. Our hose is ten years old so it may have lost some of its integrity.

Thank you for this video! I wish we knew how many hoses you've kept out of the landfills!

I replaced one of these about a year ago and today it popped off. It took some effort to get the fitting back into the hose (thanks to the people who suggested hot water and petroleum jelly). Then my issue was that the clamp will not fit over the hose next to the female fitting. It's just not big enough. I ended up screwing it down on the hose below the fitting about 1 1/2-2". It's not leaking so I hope the fix lasts. I wonder why I had this issue and others don't comment on it.

Thank you. Fixed my hose!!

Thank you! I just bought a hose and my dog chewed up like 3 foot of it, so I had to find a cheaper option than buying another $50 hose!

Thanks for the advice. I am not a gifted handyman, but even I can do it.

oh man! Thank you so much!!! My end got stuck on a nozzle, and this video helped me!

hey.. Maybe you have some Canadian 🇨🇦 neighbors that we’re too “OUT OF ER” to do their Fireworks the night before..!! Haha..!! Great Vid as well buddy..!! 👍

Thank you so much! I had no idea it would be so easy!

Thanks for the video. How do you measure the hose to determine if it is a 5/8 or 3/4?

Excellen and informative video!

Thank you. That's so helpful.

Thank you!! Will do this tomorrow! Also, my father will be getting this look 😑 for not showing me this. I know he knows it lol

A big thanks. Great video - kept a good hose out of the dump!

My hoses are much narrower. I looked up this video hoping to find a technique for getting the replacement head FULLY into the hose…because it’s not easy!! Please make a video on that process!! Thanks…

I’m in 2022 and literally watching this as well 2 days before Fourth of July. Thank you

Great vedeo I have a question I have the same problem how can I use on the flexible or expandable hose?

This was super helpful. I need to do this tomorrow.

so that's a female end that he just replaced, which connect to a nozzle sprayer?

Thanks man, that helped!

That was excellent, thank you!!!

Great idea actually

Just cut the end of the clamp and then you can do one of 2 things. You can leave enough tail to fold it over on itself to make a blunt end vice a sharp one or you can get a silicone hose cap and epoxy it onto the tail.

My end of hose is welded onto the sprayer with corrosion. I'm just going to cut the damn thing off and buy a new end. The sprayer is broken anyway so no big loss. Thanks for the video.

2:17 the neighbors are definitely peeking out the window.

People in the background shooting up the place …. Lol jk But thank you sir! Amazing video and explained everything so well 💪🏽🔥

Good video Sir, thanks a bunch. I'm about to do this right now. Wade Out

I have the same hose, what size did you get for yours. And thank you for this, I will be replacing it myself 💗 my husband will be super proud.

I got it sir, Short and sweet ! Thank you !!!

Stupid question, works the same way to replace a worn-out female hose end? Also, what if I am not sure of the diameter of the hose? Thanks!

Thank you! I am going to do this this weekend.

Right on! Now I dont have to throw my hose away. 👍😎🤙

glad I founds this-just saved me a some bucks on a new hose!

I just did it and worked pretty well! Thanks

Perfect explanation in Generation X terminology. 👌 U don't have to "ROID OUT"... Lmao. 🤣😂🤣

"4th of July is in 2 days, yup. That's happening" 😂

Thanks for the video. Home Depot one is about half price. Even the same brand in ace hardware is much cheaper.

yo, thanks for this video and providing the links

Hey Thanks man for this great video I thought I’d need special tools to do this. I’m a female with a RV AND I need to get a pressure nozzle off and add the female end with threads Bcuz the place I go to on the mountain their hose has stripped threads and I cannot fill the Rv H2o reservoir now. So I was gonna walk into ace and ask but I watched your video and I have the tools already and didn’t you make it look easy?! Thanks

Thanks! Ordered from your link. Have a great Navy Day!