@slowwalkprepping 3 ай бұрын
Very helpful on how to remove the PCV . Thanks !
@jonathanburkhead681 2 жыл бұрын
Hey Max do you know the part # to the right pcv vavle. I know you showed one but was that the one part.
@2themaxx853 2 жыл бұрын
Hey Jonathan, I don’t remember the part number, the one from autozone was wrong and they didn’t even have the correct one on stock, so I had to put the original one I took off back on
@jaantonio702 Жыл бұрын
Cant find pcv valve on 2008!!!
@cybersfn7678 Жыл бұрын
Did you ever find it
@frankkramer2267 Жыл бұрын
Look on valve cover
@chrundlethagreat 2 жыл бұрын
How did you get the sensor part out? Idk what it is to be honest.
@2themaxx853 2 жыл бұрын
The sensor has like a vacuum hose with a green clip,press on the green clip and twist/pull at the same time. After you got that vacuum hose out you can remove the wire conector that’s on the PCV valve, the way you remove the wire conector is from the top it has a little tab where you press down and then just pull… now that you have both of those things out you twist the PCV valve counterclockwise and it should come out
@WeddingbyLeo 5 ай бұрын
what year engine is this?
@2themaxx853 5 ай бұрын
4.2L V6
@Juanbaez_ Жыл бұрын
What was the part number?
@2themaxx853 Жыл бұрын
Hello, I don’t remember the part number, the one from autozone wasn’t the correct one and they didn’t have the correct one in stock so I had to put back the one I took off. I suggest looking for it on Amazon or rock auto if you are willing to wait for the part.
@rogeryanez8107 8 ай бұрын
Is that a 5.4?
@2themaxx853 8 ай бұрын
No, it’s a 4.2L V6
@ricklopez190 2 ай бұрын
@@2themaxx853 you should put that in the title.
The Old Mecanico Show
Рет қаралды 694 М.
FordTechMakuloco
Рет қаралды 726 М.
Truck Life Dad
Рет қаралды 24 М.