No video
How to replace a riveted Winkhaus Cobra centre gearbox door lock, quick and simple method, save ££££
Рет қаралды 4,760
Күн бұрынWe get asked a lot about how to change these riveted gearboxes on the Winkhaus locks rather than the normal T20 hex or Philips bits you would see on the majority of multipoint door locks, so we decided to show you a short simple method on how to do this with a few simple tools and parts you can order from the links below.
Rivets: www.double-gla...
Gearboxes: www.double-gla...
Winkhaus Stock: www.double-gla...
Use YT10 for 10% off at checkout 👍
Thanks from all of us at DGPS LIKE AND SUBSCRIBE 😊
Our store: www.double-gla...
Our other store: www.eliteframe...
@alanpatterson2384 9 ай бұрын
Very helpful, particularly the link to the rivets. Why Winkhaus does not (like other manufacturers) use screws is, presumably, to encourage users to buy the whole mechanism. I will avoid Winkhaus mechanisms in future, as mine failed after five years.
@DGPSUK 7 ай бұрын
Hi, yes that is most likely the reason , would be so much easier if they did use screws.
The DIY Guy
Рет қаралды 123 М.
schlossereioldorf
Рет қаралды 20 М.
UPVC Spares 4 Repairs
Рет қаралды 12 М.