Hey Tom, my Uncle taught that to me 50 years ago. He taught everything automotive to me when I was 15 saying "you will thank me for this when you get your own car" . I loved helping him fix things, not just cars. Turned out my first "car" was an Air Force surplus Dodge D-200 crew cab with the big slant 6 and 4wd manual four speed I got at Griffiths AFB near Syracuse, NY. You just can't kill those engines no matter what you do with them. I put a Meyers snow plow on it and made a pile of money snow plowing in the Winter, and landscaping the rest of the year. The Dodge cost me $300 at auction in 1974. I undercoated it with toilet ring wax thinned with linseed oil to keep the body and frame from rusting, and that really worked much better than undercoating in a spray can. It filled the rust pits and stuck much better than the asphalt undercoating. I sold the truck in 2001, and it is probably still driving around somewhere.

Had a couple people tell me the smaller the tire, the harder to break the bead, just did one of my John Deere front tires (15X6.00) in less than 10 minutes. The jack method is "Da Bomb", thank you.

This video is getting old but out of no where my wife's tire developed a valve stem leak. Had never fixed one before and you made it look easy. Thanks for the video!

A good trick with the floor jack, Frugal. Thanks.

I'm about to mount my own winter tires on some new dedicated winter rims and this video makes it very clear on how to first install the valvestems. Looks like I'll be making a trip to my local auto parts store. Thanks man!

Just wanted to say a big thank you! I watched your video several times before changing the valve stem on my Chrysler town and country today. You saved me both time and money. I really appreciate informative videos like this one. It only took me under an hour from removing the tire, breaking the seal, adding the new valve stem, and adding air back to the tire. Now I know how to do this if needed in the future. Thanks again!

Just found your channel tonight when I searched for 'change a valve stem'. I'm looking forward to watching your videos!

This is awesome! I just did it and it did not take me long at all! Thanks man

Very helpful. Never thought of using a jack to break the bead. Thanks.

Man, I've had that Lil 4 way tool for years and stupid me never thought to use it to pull new valves up. Thanks man!

Thank you for the great explanation, I love DIY, but also enjoy understanding what goes into the job, when I don’t want to get that dirty, but don’t want to be “taken for a ride” for a set of 4 brand new tires.

I liked the use of the screwdriver to hold your jack handle together. I lost the nut to the bolt that holds my jack together so I stuck the bolt back in & used electrical tape to hold it in as a temporary fix.

Perfect little YT video. Just what I needed. Thanks a lot Tom.

Ah man thanks for the help. at 3:57 is where I needed help to pull the stem and I didn’t know how to. Even though I had this tool but didn’t know it can be used to pull the stem. Thank you so much for the video. I used silicone and it was a breeze. Pulled right through. This tool was so much easier to use. Thanks again

thanks man, the little valve stem tool made all the difference.

Thanks man. First time trying it and you showed me the East way.

Thanks awesome man. Thanks for a great video. I’m definitely trying this

Frugal Prepper thank you! Adding this to my preps.

Nice. Super easy. I’m about to change this valve , I like the jack trick. Thanks

Like the bead breaker! And I never realized you could use the valve core tool as a puller. I thought it was for cleaning the threads!

Brilliant teaching, just like in this video as long as you know how to use a jack to jack up the car so it won’t damage the tire when you crush it to let it loose from the rim. Great video

Great video Tom! Thumbs up as always!

Exactly what I needed to see. Thanks so much for sharing.

Good advice. So easy that even I can do it!

Thanks for the video. I hadn't realized that you could thread the 4 way tool into yhe insude of the stem and use it to pull the stem into the wheel.

Bro you are a genius and a life saver!!!!!!

Thanks for the video Tom.

Nice trick with the valve stem tool!

Thank for the valve stem trick. I was able to do my tractor tire with the help of video.

Great job, looking forward to next one

Awesome Video! The Jack tire removal was ingenious!

Thanks Tom, great info!

Smart dude! Doing this tomorrow ! Thanks

Hi Tom. I like your jack idea. I'm in Columbus for a week of training. Now I can share your weather. :)

Wow that's innovative breaking that bead!

Thank you Tom for the info

Looks easier than i thought just gonna do it myself thanks a ton

Good video, straight to the point.

Great tip. I appreciate it. I'm just putting stems on my airplane tires and appreciate the quick tip.

Very helpful, making a hard job easy Thanks

I tried filling my friend's tire with air and I think I pushed too hard and pushed the needle in in the valve stem and air started shooting out. I think I just needed to replace the valve stem but didn't know how yesterday. Nice video.

Great video! Very cool! Thank you!

Superb! Thanks!

Awesome video bro. Well done!!!

Ill be longhorn mint dipped!!!!! Great job!!!!

Good solid advice, save 20 bucks

Nice job! Thanks!

This guy deserves a statue for pronouncing Hyunday correctly!

Thank you

Very good video thanks buddy

Like the jack trick!

Thanks

You are smart guy 😎

Thanks. Took less than 5 minutes.

Only reason I watched this video is to learn a convenient way to replace my valve stems. Thanks

Thanks for this video, Just a little quick on the Siliramic presentation; -0) Had to put the video on Slowmotion. That stuff looks awesome.

Wow.. cool 😎 thanks man👍

Good shit Tom! Save me hella money bruh! 🙏

Thanks man!

great video! , this was pretty helpful, new viewer here hope we can show luv 2 r channels 💕🙌🏽

Wassup man! There’s a piece of plastic from the cap stuck in one of my tires because it broke and it has low tire pressure but can’t add air cause the plastic is covering it.... do you know what can i use to take the piece of plastic out? Without damaging the tire valve. Thanks!

Excellent.

Genius

Does the lube help seal the stem, as well? Thanks for a great DIY vid.

You have a musical ear to sing the same pitch as when the tyre pops :)

Looks easy enough. I bet you found your tool after you were done? That's how it goes with me.

I just watched 10 videos on how to safely remove the the tire from the rim and with straps, blocks, and whatnot and here you go just putting the wheel under the jack and the car.

I don't see it mentioned, but I had trouble getting the stem inside the rim covered by the tire. I used a paint can opener, stuck it under the lip, and pulled it over to make a seal.

is that lube specific tire lube or what kind of tire lube do you need to do that

What kind of brush for rust? Also I watched several other videos for breaking a tire bead. This was best. very helpful thx

My valve stem break is on the outside of the rim, so I am thinking of throwing some kind of putty or epoxy or something, enough to seal the break in the stem but not so much that getting it out of there to replace it will be difficult... But now that I've seen how simple it is to pop the tire far enough off the rim to do it the right way, I might just grab my hydraulic jack and give it a go. I really don't have the extra $25-$35 to take the tire to a shop right now, but $4 I can swing. And I have all of the tools available except the compressor but I can take the tire to Wawa when I'm done for that

Hey FP, you put that Cilaramic on break pads as well? You mentioned using it on your breaks. If so, wouldn't that make the pads slippery?

Thanks Tom from Tom

Nice

smooth......

I don’t think I wanna do that on my custom rims but otherwise great video, thanks and God Bless

Sir, somehow only my right front and right rear’s valve stem core are shorter compare to left ones after changing new wheels. So it’s very hard to check air pressure with my gauge since valve stem cores are shorter and gauge cannot touch (or push) the core... How can i resolve this issue?!

Good trick to jack on tire!

Now I can get on the road to get some parts and fix something else. Sounds like me!

Old school bumper jacks work like they were made to break a tire off the bead.

I only have a air pump that plugs in would it get it back on the bead

What's the size of tire valve stem for the 235/60/R18 (2011 Hyundai Santa fe limited) thanks.

When you remove the core, about how long does it take to completely let all the air out?

fuck yea, nice video. no bs

Very helpful showing my wife

Thanks a lot!!! I definitely will be doing that myself. I just got scammed, they didn’t even change my valve they just tightened the valve and charged me. Some ghetto looking shop. Thought I was going to be able to save myself some money but I got scammed instead.

Subbed. Thanks guy. Good video. Get that other video going with thenew tool plz lol later

Silicone used ? , I didn’t see it in your link with items used , TY in advance

Nice idea with the nail through the stem stick.

bruh the jack to pop the beed is genius

An air tight plan .😊

At about what psi does the bead seat ?, thanks

What was that silicon base shit you used on brakes too? The brand.

Will I have to re-balance my tire?

Can I do this with any car tire

What about reseating the bead? I thought you should spray it with something??

What’s the name of the lubricant you used?

Whats the name of the silicone you used? Thanks!

Where did you buy the valves from?

This repair was $42 bucks at my local shop.