How to replace an auxiliary drive belt and a crankshaft pulley

No video

How to replace an auxiliary drive belt and a crankshaft pulley

Рет қаралды 282,962

TutoBuild Eng

Күн бұрын

Пікірлер: 28

@YiannisPagonis 8 жыл бұрын

Hi.Your video is very crear and very palpable.Thanks my friend.

@oaktree3240 3 жыл бұрын

Great Video. Helped solve my problem worn belt squeel without the need for special tools to tension the Eccentric pulley wheel. The only error in your video is that the adapter should be 3/8 to 1/4 NOT 1/2 to 3/8. Otherwise spot on.

@johnkahts7698 6 жыл бұрын

Nice video, with good narration. Will definetly help anyone wanting to do the job.

@mikhailchyorny7275 2 жыл бұрын

Thank you this is very helpful.

@marieanders 19 күн бұрын

You mean 1/4 socket wrench grip which is 6,3 mm - not 3/8 ?

@lemacarr 4 жыл бұрын

De verdad, muchísimas gracias! Super claro.

@hipstarchild 6 жыл бұрын

Awesome video. This really helps. Thanks !

@AhmadAhmad-px2km 3 жыл бұрын

Great work mr thanks👈❤️👍

@atanaspetrov9696 2 жыл бұрын

what special tools to tension the Eccentric pulley wheel are used to remove the auxiliary belt

@hannahd9444 5 жыл бұрын

Excellent video my friend, thanks so much.

@hipstarchild 6 жыл бұрын

why did you lock the tensioner roller for ? I don't understand why.

@pyromaniac354 3 жыл бұрын

Outside is a bearing inside is not so lock the center and outside spins

@friendlyg8256 7 жыл бұрын

Hi tuto, I have a nast rattle/ticking noise on the same car and this could be a possible reason, Car has had a recent oil/filter change, I am wondering how long this took in all? Trying to work out labour costs if this is the problem Cheers

@nanskruger9454 7 жыл бұрын

it is great videos but can some one tell me what must i do to fix a waterleak at back of water pump

@v3borg190 5 жыл бұрын

Why do you need to lock a flywheel if you work with a drive belt? It makes sense only if you work with a timing belt...

@Dosedmonkey 4 жыл бұрын

To undo the fly wheel nut. Otherwise fly wheel will just turn.

@georgecroney6168 2 жыл бұрын

Locks the crankshaft, so you can use a ratchet if you don't have a super powerful gun or space to use a gun

@zhaiken6607 5 жыл бұрын

Ew10j4 engine ?

@J4C08G4M3R 4 жыл бұрын

Don't get why bolt is tightened and then tightened a further 50 degrees plus then make sure it's a certain nm, why not just say tighten to the torque of 190 in the first place

@HOrseshoeM 7 жыл бұрын

8:08 up until 8:22 ... how?? I've tried everything and the belt just won't go under the tensioner roller!! In the video at first it looks like he has the same problem as I do but then he magically stretched the belt to go under the tensioner... Please heeelp!! I'm soo close but yet sooo far from auxiliary drive belt DIY replacement :(

@Smeagulable 6 жыл бұрын

You have to lift and lock the tensioner, or hold it by hand in loaded position while you fit the belt.

@J4C08G4M3R 4 жыл бұрын

Yeah just lift tensioner and slide bolt in to lock it 👍👍👍