On this week's How To presented by BikeBandit.com Jeremy Coker from Troy Lee Designs/Lucas Oil/Honda teaches us how replace bars & grips with Renthal 999 bars.
Пікірлер: 56
@sullygoes99665 жыл бұрын
Great instruction from someone that is clearly experienced at performing this task. Thanks!
@spectatinggamer55198 жыл бұрын
He seems the guy who would charge $200 for an oil change lol
@TM2254911 жыл бұрын
This would definitely take me more than 9 minutes.
@ThumperzGG4 жыл бұрын
Lol thanks just helped me out got some red cr hi bars and switched stock ones out
@IAMSKILLZ2410 жыл бұрын
Look at his sunburn lol
@christophmorsack245810 жыл бұрын
Good vid. Thx
@Dutchevan1111 жыл бұрын
these videos has helped so much since i moved out of my parents house and have no clue how to do anything mechanically on a dirtbike!
@rockybutler10 жыл бұрын
That's a poor way to install grips - don't put a hole in your grip unless you want it to rip faster, and get water and dirt inside your bars. Blow the grip up with compressed air like a balloon then pop it onto the bars.....
@tworivers717 жыл бұрын
Totally agree...
@pappaclutch32662 жыл бұрын
No, this is wrong. Use Rubbing alcohol, less water drys faster. Just as slippery.
@xxbryan715xx13 жыл бұрын
those are the best looking bikes in the pits
@brodyrichard2634 жыл бұрын
White grips are just insane to me
@cwatson427853 жыл бұрын
Those tan lines on his face 😂😂at least you know your mechanic actually rides! But great info! I saw other bar videos where they slide off the throttle tube while in place which I have no slack to do so
@druminsk812 жыл бұрын
dude how old is this kid?? i soo badly wanna be a factory mechanic (or on a sick team like this guy)
@BLYFACTOR2 жыл бұрын
I've been wondering if you can put grips on the same way as golf grips.
@MrOriginalMan411 жыл бұрын
i found black palm gloves stain them but the mud should wash right of.
@RedneckRIdersofPA13 жыл бұрын
the dude at 0:30 even looks like he's thinking "whos stupid idea was this"
@jarrettseelbinder818411 жыл бұрын
Should I get white grips for my bike
@brodyrichard2634 жыл бұрын
I can tell you how many times I had them all finished and had to tear it down to put the throttle tube on I always always forget... Also white grips 🖕 off with that
@Instabum8 жыл бұрын
ffs. im so confused. why is the kill switch the same as my holeshot device?🤔
@djmystery72357 жыл бұрын
Can I transfer my grips over to the new bar or will I need new grips
@ScrappyDog2007 жыл бұрын
Dj Mystery depends if the grips are in good condish
@speedboiable10 жыл бұрын
Their throttle tube wouldn't be stock, it would have a roller bearing in the end like the protaper one.
@eddie6532111 жыл бұрын
had mine 25 hours no problem still white :)
@OBELISK32109 жыл бұрын
Any one know what the beats called?
@Djmedic239 жыл бұрын
What is with the tape on the bars on the cross member ?
@Mrich7759 жыл бұрын
They cut the crossbar for a different level/feel of flex.
@16MrJay12 жыл бұрын
How to use spray paint to put dirt bike grips on
@1234tche12 жыл бұрын
thats one other reason. like i said i hate grip glue. next time you switch grips try dumping gas in the grip sloshing it around a little. Dump the gas out and then just slip it on. let it dry for about 15 min then go ride.
@hutch273e11 жыл бұрын
why is the cross bar cut in half?? cause i herd the renthal twinwalls make if feel real harsh in your hands. So does that help the bars flex and reduce harsh feelings?? and the tape on it keeps it together so they are still strong?
@breannabalDwin123411 жыл бұрын
they seirsly do but cause u have gloves it dont matter that much cause its coverd
@jarrettseelbinder818411 жыл бұрын
Because I'm afraid of me getting them and they will be hard to keep whit
@tannershallahamer29773 жыл бұрын
How’s that sunglasses tan hahah 😂
@jdeaton1713 жыл бұрын
@xxbryan715xx haha so idiots like me dont get glue under the throttle tube on accident when sliding it on.
@elijahlockwood832411 жыл бұрын
@sledsandmx
@BowHunt122912 жыл бұрын
idc how fast they get dirty, im getting white grips lol theyre ill
@OLLY60513 жыл бұрын
Lmao look at the tan on his face!!!
@milestsinnijinnie83443 жыл бұрын
But you never use your front brake
@lilpap97411 жыл бұрын
I thought your not supposed to put your throttle tube all the way on...
@emax79009 жыл бұрын
Tanned
@pappaclutch32662 жыл бұрын
I hope he remembered to torque them down 😅
@jdeaton1713 жыл бұрын
lol he only did 1 grip! the throttle tube sucks, i accidently glued it off once and had to buy a new one.. lol
@1234tche12 жыл бұрын
grip glue is crap i have had several grips slip off using grip glue. i use gasoline and i have never had on even come loose.
@keith17915012 жыл бұрын
fuck, i want to b a mx mechanic so bad
@jarrettseelbinder818411 жыл бұрын
White*
@ColtonfromSomnium13 жыл бұрын
yeah i just put grips on a day ago... shit.
@MFredericks54613 жыл бұрын
sun tan much????
@xxbryan715xx13 жыл бұрын
@m0t0cr0ss17 well he only needed to show us how to change 1 grip so i dont see why he would waste our time repeating a process.......
@ruymxsx713 жыл бұрын
@razz4646 twati
@MuddyBob6508 жыл бұрын
he looks so miserable.
@kevinstearns41987 жыл бұрын
dorky
@razz464613 жыл бұрын
first
@notrealy1802174 жыл бұрын
Why the fuck does he cut the number plate lmfao, you can just disconnect it and fold it over