How to Replace Cabin Air Filter 2012 Ford Focus

Рет қаралды 111,092

6 жыл бұрын

Purchase this filter at: filterheads.com/products/cabi...
AQ1211 filter fits:
Ford C-Max 2013 - 2017
Ford Escape 2013 - 2016
Ford Focus 2012 - 2018
Ford Transit Connect 2014 - 2017
Lincoln MKC 2015 - 2017
The model shown in this video is a 2012 Ford Focus but installation is similar on the other models.
Timestamps
00:25 Filter location
01:20 Remove old filter
02:02 Install new filter

Пікірлер: 43

@filterheads 5 жыл бұрын

Purchase this filter at www.filterheads.com/i-357-aq1211-cabin-air-filter-particulate-media.html?ref=category:12

@REVNUMANEWBERN 5 жыл бұрын

The engineer who DESIGNED where this was put & how should be FIRED ! After getting on my knees OUTSIDE the car, I decided it best for me to push passenger seat as far back and seat back as low as possible, THEN throw my legs OVER the seat with head in floor board, what a joke !

@CortxVortx 4 жыл бұрын

And thanks to all manufacturers for making everything BLACK back in the shadows.

@es-qf2gw 4 жыл бұрын

The cabin air filter on the focus is super easy compared too replacing the blower motor. Then you will need to resume that fun position for about three hours. Btw CUK25-007 is the original oem supplier carbon filter part number if you need a higher grade filter.

@2229lionman 3 жыл бұрын

@Yzb. CutMe Orses seriously! No cabin air filter under the cowl to replace, parts stores say "no parts for your selected vehicle", and the few online videos for the 2010 say there isn't one. It's an absolute joke. Is it simply in the same spot as this 2012? Also, how did you get around the "no parts" issue from parts stores? I'm worried I'm gonna pull out the old and not find a replacement for a new one

@filterheads 3 жыл бұрын

Yes, Ford and Nissan both have this poor install process.

@noroom4commies086 3 жыл бұрын

@@filterheads i own both a ford and nissan. I find the ford more difficult but that might just be because the ford is a smaller car.

@dirtmover123 6 жыл бұрын

You forgot to mention that there is a T20 screw that needs to be removed from the bottom of the cover. Not a big deal but if one doesn't have this size driver to hand the job can quickly grind to a halt. Suspect the screw has been removed from your demo vehicle at some point.

@filterheads 6 жыл бұрын

Thank you for in forming us. This vehicle most likely had a change at the dealer in the past because we have noticed that the mechanics tend to not put that screw back in the housing.

@ILikeDonuts666 5 жыл бұрын

If theres supposed to be a screw my 2016 focus didn't come with one. It looks like a slot for a screw but no screw. And I'm the only one that's checked it

@filterheads 5 жыл бұрын

If you had your car inspected by a mechanic they could of removed the screw and not replaced it after looking at your filter.

@dirtmover123 5 жыл бұрын

@@ILikeDonuts666 Maybe they stopped installing it in newer models? It's not really necessary.

@REVNUMANEWBERN 5 жыл бұрын

MINE didn't have it, probably left out by dealer when it was replaced MANY years ago, we just replaced @ 100798 miles

@teawillie 5 жыл бұрын

Good Lord!!! I agree with others that the placement for the cabin filter is poorly placed. I used to change my cabin filter myself all the while I had my 2003 Mercury Sable. Bought a 2012 Ford Focus SEL recently and checked out this video to see where filter was located in my "new/used car" ....Like hard homework, I don't wanna do it , but willing to at least give it a try. Sounds like I'll need to do some stretching exercises beforehand LOL

@filterheads 5 жыл бұрын

It always helps to push the passenger seat as far back as possible and having a flashlight with this installation.

@theJStrick54 9 ай бұрын

Pro Tip: to put the cover back on, just lay with your back on the floor and legs out the passenger side. Make sure you have enough stamina, flexibility, and patience before starting this project. At one point, I contemplated just laying there and hoping someone found me to help me get out of the awkward position I found myself in.

@nickphillips4398 6 ай бұрын

Been there man lol!

@filterheads 2 ай бұрын

Great advice! This is exactly how we do it.

@AD-1138 6 жыл бұрын

Could they have made this any more difficult to change? lol Excellent video, thanks!

@filterheads 6 жыл бұрын

There are are harder installations but the Ford engineers could of done a better job. You're welcome!

@jendelly 5 жыл бұрын

Absolutely agree! This could have been designed better. Just like where the plug is for the auxiliary. I mean seriously? IN the glovebox??? I just replaced my filter and it was not fun. 😤

@jendelly 5 жыл бұрын

Andrew Harris omg I never thought about the whine! I was wondering why it started. Thanks for the info.

@HaploPrime Жыл бұрын

Yes. Look at the 07 Mazda 3 which is also ford designed. You need to remove the whole fuze panel to access the filter.

@guyincogneto8979 4 жыл бұрын

Great vid. Straight to the point, no jibber jabber about this that or the other.

@filterheads 4 жыл бұрын

Thank you!

@Shitongaza 2 жыл бұрын

Will itmakethe blower throw air stronger?

@tenzATL 4 жыл бұрын

I just changed mine, it was a PITA. Thanks for the tip to squeeze and twist otherwise I'd be struggling for the next 30 minutes. I literally had to get my face in there to even get the cover back on.

@filterheads 4 жыл бұрын

Glad it helped! Ford definitely needs to have their engineers step up their game.