Im a single father with a 12 year old daughter . I work 45 hours a week to try snd makes ends meet . I cant tell you how much this video meant to me ( us ) . Our washer has been barely spinning for months . I searched the internet trying to find an answer . I went out on a limb and paid 50 dollars for a new clutch from a local alliance repair shop . I watched your video probably 15 times and had the old clutch out and the new clutch in within an hour . Thank you so much . Now we have a washer that works .

Very easy to follow! I repaired by myself and I am a 67 year old woman!! Thank you so much.

Thank you on helping me fix my 22 year old Kenmore washer, saved me hundreds in repair or replacement

Dude you just saved me hundreds. Washer slowly quit spinning well and last night finally gave up. Ordered a 20 dollar part on Amazon and had it fixed in no time. THANK YOU!!!!

Just used your video to replace the clutch and coupler in my washing machine. $75 and an hour of my time and it works! Thanks!

Very helpful video. Thank you. My washer and dryer both went out on me at the same time so I'm here finding out how to do the repairs myself. Even if I had the money to hire a repair man, I would still do it myself to save money. I like fixing things though. It gives me a sense of accomplishment and purpose. Although as of today either my air conditioning is on the fritz or the blower on the furnace isn't working properly! I can't seem to get a break! Ugh. I fixed my dishwasher a month ago. It was a $14.99 part. I'm a 49 yr old woman with teenage daughters. I'm trying to teach them how to be self-reliant and repair things instead of replacing to cut down on waste and unnecessary purchases.

This is a Whirlpool Direct Drive washing machine. Made various models for about a 30 year production run. Incredibly easy to work on and very dependable. Parts available on EBay , Amazon, and local appliance repair shops. People throw these away because they are “old” when in reality they last 3-4 times longer then most new washers. Also NO computers or mother boards to break . Yeah many people will wish they kept and repaired them when they are all gone.

Hank is very easy to follow I fixed a Kirby Vacuum put a new fan on I'm glad you made this video Thank You I'm a 64 year old woman .

Thanks!! 6 years later, the link you provided for the clutch kit on Amazon is still the best (cheapest) place I found to get the OEM/Genuine parts. Looks like the seller (Cashwell appliance parts) is semi-local to me, but I checked the part on their website and it was $44, compared to ~$22 for the part (including shipping) from the same seller on Amazon. So I bought it and let them deliver it to my door for 1/2 off their walk in retail price. Not a great way to do business IMHO, but the part worked great. Washer spins like a champ now!!!!

Still relevant today… Kenmore series 80👌🏽👏🏽

I've found the motor area is easier to access if you loosen and pull the body forward as it was intended rather than lay the unit on its side. All of the clamps were made to disengage from the front as well.

Thank you for posting, I was able to diagnose and repair my washer without calling a repair person. It was easy with the detailed step by step instructions you gave!!

Getting the retainer ring back in was a little tricky. It doesn't really thread in, as said. First, make sure that all four of the white plastic tabs are coming through (from the bottom side) properly. Then make sure that the four metal slots go all the way on the motor so everything is seated properly. Then I put the tang end in the hole, and held the ring down with one thumb positioned just past the tang (in the clockwise direction). Then I used the tip of a flat screwdriver to push the loose end of the ring toward the center (to make the diameter smaller). At the same time, I pushed the screwdriver down at an angle. If the screwdriver isn't angled down some, you probably won't be able to get the ring in. The ring has to go OVER the top (of the last one or two of the four shapes formed into the metal on the motor side), then inside.The angled-down position also helps to keep the screwdriver tip from sliding off, possibly gouging your other hand.The flat blade is positioned vertically, and it should be centered on the wire of the ring.

Nice Video! Tim Hill said what I was thinking - There is a COUPLING in the BOTTOM - You have to remove 2-4 clamps and 2 screws and the motor comes out - I literally JUST did this TODAY on our Kenmore Washer - I found a guy who owns a shop who happened to have a coupling and the small black round piece with 6 holes in it that holds both couplings (there are actually two - one facing one way the other (the one that usually breaks) facing the other way - Once you get the motor off it's REALLY easy to to replace that coupling(s) - Washer is running... spinning AND draining again after replacing that coupling and black ring it goes into (the ring was worn out too) ... $8 (in parts) - I think in your case it really was a BAD CLUTCH - but always check those couplings FIRST (anybody else that encounters this problem) when NO SPIN check the lid switch 1st - if that isn't it 90% of the time it's those little couplings... @11:36 you can see the couplings/black ring CLEARLY (between the clutch and motor)

I’m also getting one of these when I finally get my house as well. A stockpile of parts will be in place when I do get one. I’ll gladly spend $150.00 to $250.00 on one of these used before I spend $800.00 to $1,100.00 on a brand new one that can only do half the stuff that these old workhorse like Whirlpools and Sears Kenmore Direct-Drives can do. They’re nothing but garbage anyway. And as you showed, there very easy to work on and to fix and repair if something go wrong with it. These lasted 25 years or longer when they were brand new. Get it fixed up and gone through really good, I’ll probably get another 20-25 out of mine before I’ll either die, and then leave it in my old house when I’m gone. Or I’ll finally throw it out when there no more parts to buy for it, and if I’m still living, I’ll probably replace it with a Speed Queen, provided their still around, they’re still making their washers the old way they seem to be still making them now (sans 2018, of course). If fixed up very well, there’s no reason why this washer won’t out live me. If a 67 year old woman can fix it up and keep it working, then there’s no reason why a 56 year old (and nearly 60 year man) like me can do the same thing to his. These were good washers when they were out. I don’t know why Whirlpool stopped making them in the first place. Great Job Sir.... -Charles-

Bro! I underestimated the "heaving and hoeing" that is needed to pull the trany out. This video saved me from buying a whole new washer. Thanks for the great video. My washer started out with a weak spin and eventually stopped spinning. Ordered a new clutch and motor coupling but coupling wasnt broken, but i replaced it anyways because why not.

Labor wise, it took all of 30 minutes. Simple and clear. Thanks!

This video was awesome. Very well explained. I replaced the clutch, drain pump, plastic part between motor and transmission and washer dogs on my machine. Working very well now. If it helps anyone, my agitator was removed first by using a half inch ratchet extension ( Seen in another video) which then revealed a 9/16 bolt to be removed .

This washer is exactly the same as mine, that stopped spinning last night. Hoping to find a clutch kit at a local appliance repair place or Sears today, so I can get back to doing laundry. Thanks for the detailed replacement procedure. At least now I feel like I know what to expect, when I start taking things apart.

One minor detail: the rocket looking thing (15:25) is actually supposed to sit the other way as it's a cup for liquid softener. Otherwise...you just saved my gizzard! Replacement parts are SO much cheaper! And this washer...we've had it for YEARS.

Very good video for me - my machine also. Looks very heavy duty made. It is helpful to remove the agitator side - in upright position, and then go underneath. Also I find it helpful to have a camera person or to be looing at my thru the view finder/camera screen.

Great Video, Helped me fix my kenmore! My clutch was okay, but the cam was busted. The cam was included in the clutch kit, so it was still $ well spent. Thanks!

Before ordering any parts check the white plastic cam. Most of the time one of the two nipples will be worn off causing it not to engage, thus causing a no spin situation. Also, if there are any worn areas or little hairline cracks on the motor coupler, this will cause a no spin situation.

This video is super helpful. I almost had it off just didn’t know what bolt to use. Thanks for sharing.

Here's an important tip guys.... I you install that thrust washer THEN the retainer clip, you will get a REALLY annoying click click click when it's doing the agitation. Don't ask how I know this. :-/ I found it easier to just remove the motor off the transmission, only 2 clips hold it on anyway. This is also a good time to spend 8bucks and change the motor to transmission rubber coupling.

Thanks to this video I was able to fix my washer. Thought about waiting for my husband to do it but decided to do it myself!

My washer will spin sometimes. If the loaf is too heavyit won't spin. Sometimes I can spin the tub by hand and it will spin. Could this be the clutch or the coupler?

Good deal. I just did this but got the wrong clutch so I needed to reuse my blue spring. They're color coded but the clutch packs are all the same.

It's 2022 .. great video .. im about to try .. because the last time checked the coup links wasn't damaged. I found this video .. I did notice oil was leaking from the transmission.. I think I have to change both clutch and transmission.. wish me luck 🤣🤣🤣

thank you very much. ..now I know how to fix my washer. ..this video helped a lot

The pump clips and motor clips are more easily removed if you remove the cover completely and work from the front of the machine. For pulling the transmission to get to the clutch as he does here, having the machine on its side IS nice.

2019 and still works for me, thank you for taking time to explain everything.

This saved a lot of time and money. God bless you

I sure miss these types of washers😢

How the gearbox, aka transmission, works is brilliant and well worth taking a look inside. My friend was looking at my spare gearbox, as he had done on and off over several months when he experienced something quite unexpected, "holy shit it just popped into my head. I know how it works! I'm pretty sure i just had my first eureka moment too, I can't believe how good I feel over a washing machine." Our wive did not share in his enthusiasm as he attempted to explain his discovery. Yup, we are different. Thanks for the video. Cheers, Jim

Great video on this, getting ready to replace this clutch assy. on my daughters kenmore, this will really help. thanks

Great video, it really helped me fix my washer. Thank you for making it.

thanks a lot brother because of you and this video I was able to fix my washing machine

Thank you so much! This was just like my machine. Only mine did not have the little black thingy, but everything went into place just like you explained. :-)

Nice presentation and good technique, but the longer I watched the video, I got dizzy because the camera moves a lot

great video mine turned out to be the coupler--

holy smokes this makes the coupler job look simple. If it's the cluctch I'm trashing it too!

looks easy...ill be trying it this weekend...hope all goes well

Be sure to get a genuine OEM Whirlpool clutch kit. The packaging will say made in US or Mex. It costs a little more & is worth it. The dirt cheap parts on EB are made in china >> DO NOT get made in china crap. I just refurbished my washer & only installed made in USA parts and just spent an extra $30 or maybe less >> drive block, spanner nut, seal & bearing kit, tub seal, clutch, Dr/Br assy w top seal, cntr-bal spring plus a capacitor. After refurbishing & repair, 25-yr old washer is now almost like new.

its turning but this is a neutral drain type. It should not be spinning while empying the water. It spins once the water is gone. The transmission neutral drain parts need to be replaced, about 25 dollars and easy to replace.

Ok just wondering why you haven't put one up in a week but I watch all your videos and I like the vacuum tune-up videos

Very well done...off I go to swap this thing out

Thanks brother.....I GREATLY APPRECIATE YOUR HELP!!!!!! GOD BLESS

For 4 bucks I would always go ahead and install new agitator dogs when doing a clutch.....just a personal preference.

Very nice and well done!! I had the same problem and this made it easy to follow. Thank you!!

Nice clean machine for a garbage pick! You lucked out! Great machine that will last a long time!

It's actually easier to work on them sitting up right and take the shell off

Thank you for your in depth video. It really helps!

Thanks for sharing. You give me all of the confidence in the world.

Thank you so much for this detailed, concise video. Made things so much easier :D

I have a question. My coupler was broken and I repaired it and it appeared to be fixed except for it only lasted 2 minutes or so and then stopped spinning and agitating at all. Does that mean then that the clutch would be my next step to try? Or do you think something else is going on?

I was just wondering did this machine also not agitate? Thank you

I agree why not if I knew how to fix appliances I would do the same thing very helpful 👍🏽

I’m trying to do this and the transmission just won’t go back in. I have the washing machine tilted against the wall and I’m trying to put the rod back in and putting it back in about 1/4 or 1/3 of an inch it stops before aligning with the bolts on the bottom. I can see the rod coming out of the middle in the inside of the machine but I just can’t figure out with the bolts can’t go right up against the holes to screw in. Does anyone know why this is?

Thank you you help me fix my washer!!

I did 4 different troubleshooting steps as shown on KZfaq: 1 switch inside door, it was not broken nor loose, but I did unscrew and clean up and retighten. The switch does open when door is closed. (2) I looked at plastic spinner that engages the engine shaft, no broken pieces or cracks. I disassembled to remove transmission and engine, observing that the clutch is NOT loose or moved by hand. It is very hard to move. (4) I checked inside the pump, no debris or broken pieces. All these steps do NOT solve my "no drain/spin. Please advise what is next step. Thank you!!!

Appreciate this man saved me a lot of money

Thanks brother great job!!💥💥💥. Can you make one for maytag machine because that type of machine doesn't fill up before spinning or agitator on.

Awesome! Parts arriving tomorrow. :)

I had one today that looked like a bad clutch but turned out that the tub was rusted and bent and partially separated ! $240 tub retail

great vid, very detailed and easy to understand,

Hank I replace the clutch and on the test it and it made a grinding noise. Pulled it apart again and found it had shredded off shavings of the clutch pad. What would cause this on a new clutch?

Sounds good I do the same thing you do get them from free fix them and sell them

Trying to fix my mom’s washer, the agitator turns back and forth but the basket doesn’t spin at all. Would this be the answer?

Very good..my frend.s....wellcome. Sonora. Mexico. Thank you

I have this exact model and the bolt in the agitator was rusted

You need a gopro camera on your head!! then we could see the whole repair and you can use both hands. :)

Trying to wiggle the transmission back in a 2 inch gold color pin falls out of nowhere , any body know where it goes?

Sometimes you can just stretch the spring on the clutch and you good to go

This video was clear and helpful. Great info. Thanks.

how did you know it was not the water pump? great video

why would there be a louding clicking after I replaced the clutch. It is agitating, spinning but with a loud clicking

Thanks u...u made it look too easy..

Very helpful thanks Buddy!!!

3:49 I don't see these parts in my Whirlpool. I am wondering if It was like this or I lost it?

Help needed. Just changed the clutch, as the old one was loose as shown in the video. But the washer still doesn't spin properly. The motor runs, the drum barely moves, or spins slowly if I push the drum a bit. Any idea what else may be wrong?

Thank you Sir for posting this video.

Great video, thank you..... simple question, would the clutch be the same issue if it intermittently spins in between wash/rinse and the final rinse? Mine agitates fine (I replaced the dog agits a few months back) but now it doesn't always spin, sometimes it does sometimes I have to restart the spin cycle. I can usually hear if it's not engaging and I'll usually just have to open the lid and close it a few times for it to kick start and spin the clothes

I'm extremely cheap, I like that, cool video.

That washing machine is a 80 series... that kit will fit... it's almost the same as that one, only one button less

The coupler to my washer spins but the tub does not spin. Should I even bother replacing the coupler? Should I change the clutch?

The bolt to my washer agitater is on the side not the top. How do I remove it and what size is it

What a big help your video was thank you

Not sure if my washer has a clutch problem,I can hear the motor working and it does everything else,such as draining water,fill,etc but it wouldn’t agitate or spin, but there’s times that it would spin,so I check the agitator dogs and they were worn out,could the worn out agitator dogs also cause it not to spin?thanks

nice ratcheting tool....can u tell me where i can buy it...thanx a lot buddy.

I’ll try to do it 👍🏻

Thank-you!!! Well done!!!

Hank, I can't seem to get the agitator off the drive shaft. There's the nut I unscrewed and all the top parts but that damn thing wouldn't budge. Any suggestions? Thanks.

Would be easier to remove cabinet off frame and just tilt it back against the wall that transmission will slide outfrom bottom

Where can I get the number part for my washer machine?

Great video. Oone question, why the extra spring that comes with the new clutch assembly?

Good afternoon, Hank I just finished the clutch replacement and upon reassembly I get this clicking sound, and there's no sniping the water fully out of the cloth. What could I be doing wrong?

Para que lave con más potencia cómo le hago, porque en todos los niveles lava como la tuya en suave

Great video

Perfect. Thank you!