Thanks Bill! I’m about to replace the screen in my door. Funny story I had to take the handle off to get the guard off and locked myself out of the house when the rod came out 😂 thankfully I watched Mcgyver as a child and the stake from a solar light opened it right back up! Great videos, well explained!

Thanks mate👍i was able to replace fly screen for my backyard sliding door..cost $25 ...your video helped a lot

Hi Bill just to let you know I Actually done a great job and I just want to thank you again I have replaced my fly screen thank you

Perfect DIY tutorial, very easy to follow and well detailed. Thanks!

life saver. Thanks so much. Love how precise you are when you say 'flat head screwdriver' when you refer to it all the time :D

Well done Bill.

A flawless workmanship, Bravo!!!👍👍👍

That looks so easy! Thanks for showing how it’s done. I ended up buying a crimsafe door because I had someone tampering with it… otherwise I would have just replaced the mesh of my security door

THANKS BILL!! My cat just ripped the screen riiiiiight down trying to catch a fly and this is the easiest tutorial Ive found so I can fix it myself 😅

Well done. Very clear and simple. Thank-you.

Thank you! My screen doors look SO much better now!! =) Very easy to follow, too.

Well explained. Thank you for this video.

Thanks Bill, you just saved me $400 for a new door!!

Thanks Bill!

Thank you Bill it looks easy let see how I go this weekend 😀

I was using a screw driver instead of a roller to put the spline in all the way around like a moron. Went to bunnings to grab a roller, life saver mate thanks

Thanks mate, I gotta do that soon and wanted to double check how it’s done. Cheers. 😊👍

Thanks for showing this video, you helped a lot of people.

Excellent walk through - Cheers 👍

Mate youre a bloody champion you saved me a trip to bunnings on a 43° day, good on you!😉

Best video on YT on how to do this!! Great job fellow Aussie! Oi!

thank you for the very clear and easy guide

Thanks for this video. I am going to have to replace my screen doors in my renal because I have cats and, well, you know, cat claws are sharp! This was extremely helpful as it will be cheaper to replace them myself when I decide to vacate in future. Thanks bill :-) have subscribed as I’m keen to check out your other how to videos 😀👍

Thank you Bill. I am going to have a go at this for the first time this weekend 🙂.

Life Saver !!!!!.

Nice video, to the point commentary

Very good demo, thanks

Excellent video, Bill. I will be making my own flyscreen and homemade sill sections (!!) very soon. I changed the mesh on my flyscreen door and it was a nightmare. Being a total beginner DIY-er, I used the stronger aluminium mesh, not fibreglass as per your video. Warning to all!! This seemed industrial and I had to exert great pressure on the roller to apply it. Too rigid. Ended up with a puncture, threw my hands in the air, said many choice words and went back to the big B to swap with fibreglass. They actually gave me a refund. Bill, would be great if you could please explain the pros, cons and uses of each type of mesh in any future videos. Thanks.

Thanks mate. Good job and very informative video.

I’m gonna do it myself thanks for your helpful video.

Really helpful video, thanks 👍 🛠️

Thanks good presentation

I found this video really helpful, thank you very much! 👍

Thank you so much!! Very helpful.

Thank you

Thankyou!! 😭🥰

Good video. I am going to do that today. 😁😁

Thank you 🥰

Thanks for the video Bill. Done and dusted.

Good video mate,,you explained things very clearly.

Thanks mate! Great explanation

Thanks bro, this helped me.

Thanks Bill! Super helpful video again! I have the exact same door and want to remove the lattice (looks like chicken wire to me) and replace with simple cross-bar. Is that possible or do I need to replace the entire door?

Great video! Cheers 👍

Thanks mate.

I guess its easier with the screen out... I'll have to do it with the security screen in... Thanks for video.

The best video demo thanks ❤️

Thanks for such a great tutorial. I’ll be going to the hardware store this weekend and attempting this myself.

Thanks mate!

Great vid bro, real handy!

Brilliant Mate

Cheers mate , keep up the good work legend 👌

Nice video. Any KZfaq DIY video completed in thongs has double the authority👍

Thanks - very useful!

Hey Bill, can you please do a video to show how to replace the screen if you’ve got the tough steel mesh?

Thanks Bill, you are my lifeline!

That was very helpful thank you for that 👍

Good, very good.

yes

Love you bill

Nice video

excellent.

will give this a go

Thnx for the vid.

Can you do a video on how to make a diamond grill window screen please?

How about tips to replace with metal wire for mouse proofing? I can’t get the rubber in the groove

Thank for your good video. My problem is how to remove the amplimesh security screen from the window frame. I have removed the two screws at the top but I am unable to lift the screen up and free from the bottom track. There at two black plastic extrusion wedges on the LH side that have taken up the lateral slack between the screen and the window frame and these are making it impossible for me to lift the screen up and out of its track. Can you advise me please?

Hey mate, can you show us how to replace the cord lock for a roman blind? And clarify whether you need to take down the whole blind, or whether you can leave the blind up while you swap the old lock with the new?

How did you remove and refit it? Ive got the same that are pop riveted

Thank you. Very helpful. BUT! 3:58. No!!! Bringing the utility knife towards yourself like that is begging for trouble, particularly while not wearing shoes. Looks like a few inches away from a nasty slice to the foot there!

Hi bill, loving your videos and your helpful tips on jobs around the house. I've got a bathroom sink where the plug is one of those push down and pop up ones, not the ones where you have the plug completely separate. Anyway when you push down on it to stop the water from going down, it doesn't lock. It stays down and I have to unscrew the plug and use pliers to get the centre bit back up to normal open state. Do you have any ideas on how to fix this. I've tried spraying WD40 but that hasn't helped.

I need to change the fly screen of my balcony sliding door but the spline is facing inside, and I don't have any idea how to take out the sliding door🤔 could you please tell me how I can take out the sliding door as well? Great video btw, thank you so much!!

Bewty 👌🏻

Legend!!

So how strands of the screen mesh did you sever with the screwdriver & spline installation tool?

How do you get the security screen off the window?

awesome and thanks for that ....you can't go wrong lol

Is it possible to remove the crisscross bars from these? Current house has this pattern and they took the screens down prior to us moving in. Don't want to feel like I'm living in a prison but want the screens to open the windows.

thanks bill, great video! If i dont have a spline roller what could i use instead?

Little dog and need to replace fly wire. The fly screen doesn’t have a metal mesh . Would you be able to show me how to install the metal mesh please ?

Could you show me how to pull down a plaster wall please

Hey bill . My fly screen has not got the grill installed . Is it possible to install a grill ?

Can You pls let us know how to unscrew the window screen

How do you put it in?

Question... should the screens be fitted with the grille facing inside the house or outside the house?

To be fair putting the screen frame straight on the concrete floor will scratch it to buggery....why not do it on a dust sheet on a bench at waist height??

is it possible to replace the mesh with the door still attached standing up? I'm worried if i take it apart, the screws etc are so old, I may not be able to put the door back up lol

No Sline-Roller? Hack?( fluted pastry cutter roller?)

What mesh do I need to buy from bunnings? Haha they all say fly screen for windows - does it matter can I just buy a roll of any fly screen mesh or?

Hi bill can you show me how to take mesh door off the rails 👍😊

My crazy dog brings me here

I used the spline and it ended up ripping the screen.

God

You cooked it, sounds like you ripped the mesh on the bottom. . . .people remember, always be careful when putting the last run of spline in as you might make the mesh so tight it rips.

Damn annoying. Not everyone has a roller in their tool box.