You can get a new big rubber O ring to go under the screw down ring at a parts store by matching size with old one. Also, clean ring and heavily spray or place from a tube silicon lubricant on the threads to allow easy removal if needed another time in the future. A 6-8" wood dowel the size of a broom handle and hammer are good to loosen and tighten the big ring. Also a rubber belt wrench is good to remove a difficult to turn ring. A pro mechanic said its possible to just loosen the tank straps on one side to allow tank to hang down, (you have siphoned gas from tank before getting started) and you can remove pump without actually completely lowering tank. But sometimes the big ring is very hard to turn so the tank may have to come all the way down to get better grip and more leverage to turn the ring using a strap wrench. Spraying the liquid wrench trying to get it up into thread can help on a badly stuck ring.
@TheYouTubeMechanic3 ай бұрын
Thank you! Like and subscribe
@johndziegiel588Ай бұрын
Great job with the video.. thank you so much!
@doranoliver1624 Жыл бұрын
Exactly what I needed. Can’t drain my tank unfortunately and it is full.
@TheYouTubeMechanic Жыл бұрын
Like and subscribe! Happy to help!
@guestguide25443 ай бұрын
Did you try a small siphon hose 3/8" plastic tube?
@jskyryder3 ай бұрын
Undue the gas tank straps on the pump side and just loosen the straps on the other side you shouldn't need to drop the tank
@kellykeys833610 ай бұрын
Using a electric socket wrench near a puddle of gas is not recommended. Nice video.
@TheYouTubeMechanic10 ай бұрын
Thanks for the tip!
@johnmilner64849 ай бұрын
Only have to lower the tank 1.5 inches to3 inches,you do not have to totally drop the tank on third gen dodge minivan
@johndziegiel588Ай бұрын
Wish you would have shown the seal ring. Also there is a special fuel ring wrench.. my ring broke taking it off that way.
@TheYouTubeMechanicАй бұрын
Damn man. That's a bummer.
@johndziegiel588Ай бұрын
@@TheKZfaqMechanic i used a fuel pump ring wrench to put the new ring on but i think a strap wrench would be better for this type of ring.
@kevinruiz6252 Жыл бұрын
Nice video tks for post it love the music I will subscribe and hope for more videos like this one Congratulations for your Chanel
@TheYouTubeMechanic Жыл бұрын
Thank you!
@robertjeffries8431 Жыл бұрын
Chrysler voyager fuel pump fues service video footage.
@TheYouTubeMechanic Жыл бұрын
Like and subscribe!
@lessonoftheday791828 күн бұрын
So I have a question I thought I had a line leak and turns out it was gas coming out the fuel pump. I want to make sure before I take it apart can the fuel pump leak or can it be a line just above it. Its hard to see in. I did put my finger on the top and gas did run across my finger, but i have never seen a fuel pump leak.
@TheYouTubeMechanic28 күн бұрын
It's probably a fuel pump. Almost certainly. But you're going to have to drop the tank to find out either way. So just drop the tank and get to it.
@ras98759 ай бұрын
Righty tighty 😂
@Kenneth-fw7tm2 жыл бұрын
This is exactly what I was looking for but I wish it was even longer! Grow your page easily = P-R-O-M-O-S-M !!