Superb mate. Never done it before. Got quoted £140 to replace and fit. Done it for £40. Thank you

All videos should be like this. Straight to the point simple and standard. Good man

Have never see any video straight forward and simple as this, 10/10 man

I’m actually so grateful god bless. I was worried what to do. I took out the frame from inside the house. Raised the window and got rid of the gap and put the frame back in place. Saved my self money and worry. Thank you

Straightforward demo, that's all that is required. Perfect.

Just as it should be, well demonstrated and clearly explained .

Great, I tried for 20 minutes to get that beading off, now I know its possible. Many thanks for your knowledge and skill. God bless you.

nice job. No nonsensical intro and "youtubery" involved. Good work.

Having just broken a (thankfully) small double glazed window with a small small stone that got flung across my garden while strimming, I'm relieved to find its easier replacing a double glazed window than a older single glazed one and there not to difficult. Thanks.

Great video,simple,direct, and informative. I've broken 2 glazed units trying to fit the beading, too aggressive with the mallet. Now, my current project should be easy peasy

Thanks very much Shane. I could not get the new unit in, but learning from you how to clip in the top and bottom beads first solved the problem.

Thank you, you gave me the confidence to do it myself, and now my windows look new again.

Absolute hero... Saves me spending thousands on new windows!

Yep, no waffle, straight to it, a refreshing change 👍🏻

As soon as I heard this gentleman I thought thank goodness, this sounds straight to the point and no messing around unlike all that American accent rubbish that drives me mad with all the chat and getting no where.

First video i've watched on the subject...........don't need to watch any others, thank you.

I found putting the trims back really tough. I found hammering them did no good at all. I spent a good hour trying to hammer them in, instead I had to push them in using a massive force. It was satisfying to hear that plastic against plastic noise as they squashed in.

Thank u for this video. I have been trying to replace a broken window pane and no one knew how or wanted try to open the casement.

Great video, just replaced the glazing in a window after putting it off for the last 6 weeks. Took half an hour all in. Would’ve been quicker if I had someone to push the glass through for me, that bit was a bit hairy!

Brilliant and thanks for explaining the purpose of the spacers since I got blue and black one's and wasn't sure if they were used for the same thing, windows come with no instructions! I don't have the tools so I'll carefully use a kitchen knife or stanley knife to prise open the beading.

Perfect demonstration, great video, thanks for sharing 👍🏿

Legend. Great work

No messing about...Great video - thanks 😊

Shane keep up the good work, straight to the point video, brilliant

This video has given me the confidence to try, thank you soo much !!!!!

Great video. It guided me to do the job successfully. Much appreciated mate!

Thanks for the vid, and a great money saver too with your help I'm part way through a job that used to be a mystery. That moon knife is a big help too

These videos are very helpful and I looked for this video and particular because I need to replace the glass as it has shattered on my conservatory, what I am finding hard as finding somewhere that actually sells the glass

That's how you make an instructional video. Proper.

Nice one, cheers Shane 👏🏻👏🏻👍🏻

This video was an absolute life saver. Thanks.

Great stuff mate, cheers

Great video easy to follow.....made changing my kitchen window easy.....thank you

Great tutorial, and all my question answered in comment section. Many thanks mate (and chaps with pointers/advises below)... AB Ps.: my advise: never clean glass with scrub sponge.👎...(and you got the idea why i'm here lol)...

Good video, and handy tip regarding not sliding the nylon hammer across the glass when tapping the beading back in. Cheers.

AWESOME!... just what I wanted to know before attempting myself. Yhe last time I had a vinyl window repair done it cost me about $100.00 bucks.

Nice video. Straight to the point and I also know which tools I need to buy! Much appreciated! :)

Very clear and clean, no need for putty then!!

To the point without blather. Thank you.

I agree with the comments below, what a nice straight forward video. Great guy!!

Excellent tutorial. That's a "moon knife" at the start if you couldn't hear. The sound went a bit funny

That was real quick. In a heartbeat !!

Great vid - no stupid music or lengthy intros

Thanks for the eazy explanation it realy saved me today

Grand now i know how to quickly and cleanly get into my neighbours house, take a shit on his floor, then replace window and stand outside my house when he gets home, see his reaction. Thank you

Great video - Just what I needed to know so thanks for taking the time to make it - Chris - North Devon

It's easier to remove any longer strips first. Here in Germany they use 'packers' all around the window not just underneath the glass pain. There's normally a sticker on the new glass pain which goes on the inside.

Fair play, straight forward instruction.

Very clear, to the point and most helpful. Thanks

Thanks, very helpful.

Can you please give links to the tools in the description? Thank you so much for this video

lovely no music no bullsh.. video thanks mate

great instruction i have one to change and having watched your video shane i will do it myself thanks.

Very helpful!

absolutely deserves all 260 thousand views and more compared to the other shite on KZfaq

A much better video thanks!

Brilliant video. Followed it step by step.thanks very much

Very informative, excellent.

Straight to the point. Jobs a good'un.

Amazing video. veey easy to follow. Thank u

Thanks didn't realise the packers were for drainage

Good video

craftmanship

Shane you are brill man

Easy instruction but should always put the bottom beading in first it holds the unit down onto the packers when the top beading is being located also for any diy folks it’s helps if you lube the beading gasket as this stops resistance on the glass.

Thank you

Thanks for putting this up.

I always wondered how glaziers get the window out! Now I know.

Very helpful thanks man. 🙏

Thank you very much for your help ✌️✌️✌️

Great! Thank You so much

thak you, helped a lot

Komolor bhai Soitendro Ingti Jim👍🏻

very helpful video, thanks for showing us how to make it :)

Very helpful, top job!

Thank you !

Great how to video!!

Great video very useful! Would you recommend this process for cleaning a blown window??

Excellent video, thanks

PERFECT!

Thank you for this video, mate 🙏🏻

Great video! Can I ask do you always put the furniture stamp at the top left instead of the bottom corner?

good to know. the double glazing glass failed on mine. there is watermarks inside it. its good to know you can just replace the glass and not the whole frame

Great video, thanks :)

Thank you for sharing your skill

Cheers pal just saved me a few quid 👍

Thanks, yes that was helpful!

Excellent video. What were the three tools needed?

Very helpful to me. Thanks mate.

Very helpfull many thanks

Thanks fella.

very helpful, ….job done.

Great job LOVED ITTTT!!!

Great video mate. Though just shows what a rip off getting someone charging hundreds for this simple thing! Are all panes the same or are some stuck in? Cheers

Great! Thanks

Hi Shane, awesome video mate, just subbed. What are the name of the tools that you used. I'm new to DIY so this is very helpful! ATVB. Take care mate. Steve. 👍👍

Nice.. we could remove glass from outside... the big big security :D

Thanks Brilliant video. I used a hose on my window(I know stupid) which has blown the spacers between the frames. Can they be replaced?

Very helpful - 👍👍👍

Nice, thank you.