How to Replace Headlight Bulbs - Honda Odyssey (2011-2017)

Рет қаралды 38,670

Күн бұрын

Low Beam Bulb: H11
High Beam Bulb: 9005
Introduction - 0:00
Passenger Low Beam - 0:48
Driver Low Beam - 1:57
Passenger High Beam - 2:24
Driver High Beam - 5:18
MiaMax Automotive Inventory: www.autotrader.ca/cars/?ph=64...
Quickest way to regain night-time driving safety is by ensuring that you are vehicle is visible and that the road is visible is to you.
This video show you how to replace the headlight bulbs on 2011 Honda Odyssey / 2012 Honda Odyssey / 2013 Honda Odyssey / 2014 Honda Odyssey / 2015 Honda Odyssey / 2016 Honda Odyssey / 2017 Honda Odyssey
The entire process will take less than 10 minutes.
Find and purchase the bulbs for your vehicle here. auxito.com/?ref=VirarAutomotive
Use the promo code for a 12% Discount. 'VIRARAUTO'
If you make a purchase using the link, Virar Automotive earns money for referral
Bulb Cross Reference Guide: www.vleds.com/cross-reference...
Watch more EASY TIPS for your 2011-2017 Honda Odyssey: • Honda Odyssey (2011-20...
***************************************************************************************************
DISCLAIMER:
Due to factors beyond the control of Virar Automotive, we cannot guarantee against improper use or unauthorized modifications of this information. Virar Automotive assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Virar Automotive recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Virar Automotive, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not of Virar Automotive.
#VirarAutomotive
#hondaodyssey
#headlightbulb

Пікірлер: 63

@VirarAutomotive Жыл бұрын

Low Beam Bulb: H11 High Beam Bulb: 9005

@rw9495 10 ай бұрын

Thank you for this great advice! Only tutorial I've found that explains in depth how to do the passenger bright light, conveniently the one that burnt out on my car lmao

@rw9495 10 ай бұрын

Push inward on the bulb and turn, don't take too long and spill steering fluid out of the reservoir like I did lmao

@witherow777 11 ай бұрын

This was the best help from any of these videos I’ve looked through! Very thankful! 👏🏻👏🏻👏🏻

@VirarAutomotive 6 ай бұрын

Glad I could help!

@devbandy9004 Ай бұрын

Awesome, crystal clear tutorial . May be the best 2011 odyssey video on KZfaq. Thanks for the upload. 👍👍

@VirarAutomotive Ай бұрын

Thank you! Glad to hear that you found the video helpful!

@drcharliewallace Ай бұрын

Thanks for this video. Just as easy as you showed it, although it is a little tighter on the driver side. Might need small hands or someone with smaller hands to help you.

@VirarAutomotive Ай бұрын

Thank you! Glad to hear that you found the video helpful!

@wgpid 5 ай бұрын

Awesome walk-through, very helpful! Couldn't figure out how to get those high beams out until I watched this!

@VirarAutomotive 4 ай бұрын

Thank you! Glad to hear that you found the video helpful!

@christinetholen997 7 ай бұрын

Thank you so much for this video, I was able to change my light bulb without any problem.

@VirarAutomotive 7 ай бұрын

Thank you for sharing! Glad you found the video helpful!

@GumbootZone 8 ай бұрын

DONE! I had trouble seeing what to do for the Low Beam because it's hidden. This video solved it!

@VirarAutomotive 8 ай бұрын

Thank you!

@aviator004 8 ай бұрын

Great video and description. I looked like I knew what I was doing when I popped the hood.

@VirarAutomotive 8 ай бұрын

That's awesome! So glad to hear that you felt confident when you attempted to change the bulbs after watching this video. Thanks for sharing.it made my day!

@joaquinlugo33 9 ай бұрын

Thank you. Your video was very helpful.

@VirarAutomotive 9 ай бұрын

Glad it was helpful!

@erichinson795 2 ай бұрын

High beam is a pain great video

@VirarAutomotive 2 ай бұрын

Glad to hear that you found the video helpful!

@vikasravindran1312 7 ай бұрын

One of the best videos.. thanks brother

@VirarAutomotive 7 ай бұрын

Glad you liked it!

@robloxgirl9606 10 ай бұрын

Good job, that was clear for me. Thanks

@VirarAutomotive 6 ай бұрын

Glad I could help!

@micahhall816 Ай бұрын

Great video. To the point and easy to follow.

@VirarAutomotive Ай бұрын

Thank you! Glad to hear that you found the video helpful!

@shoukathkhan3646 6 ай бұрын

This was the best video. I was able to quickly change the light

@VirarAutomotive 6 ай бұрын

Thank you so much for your kind words! Glad to hear that you found it useful!

@trosgood 7 ай бұрын

Great video. It helped me change my light.

@VirarAutomotive 7 ай бұрын

Glad it helped!

@pppaaa5399 9 ай бұрын

Very good video, Really appreciate it !!!

@VirarAutomotive 6 ай бұрын

Glad I could help!

@terryfarmer2979 4 ай бұрын

Thank you. This was a very helpful video.

@VirarAutomotive 3 ай бұрын

Thank you so much! Glad to hear that you found the video helpful!

@NadaSurfinAB 6 ай бұрын

Thanks for such a great video.

@VirarAutomotive 6 ай бұрын

Glad you enjoyed it!

@brettjohnson3741 4 ай бұрын

Great Video! Thanks

@VirarAutomotive 3 ай бұрын

Thank you so much! Glad to hear that you found the video helpful!

@sewpolly1 2 ай бұрын

Thank you for the video!

@VirarAutomotive 2 ай бұрын

Thank you! Glad you found it useful!

@georgepanam8133 2 күн бұрын

great video

@robertmurray298 5 ай бұрын

To the point video..well done..

@VirarAutomotive 4 ай бұрын

Thank you! Glad to hear that you found the video helpful!

@hanskarl2215 6 ай бұрын

Thank you very much! Excellent video, without which I may have torn the smithereens out of it!

@VirarAutomotive 6 ай бұрын

Thank you. Glad you found it useful!

@thinhhuynh69 Ай бұрын

Thanks

@noahsager182 5 ай бұрын

I appreciate you!

@VirarAutomotive 5 ай бұрын

Thank you!

@joykerr4558 6 ай бұрын

This was great! Thank you! I did notice that I now get a DRL (warning?) indicator on my dashboard now. I looked online a bit and noticed it might be due to the LED replacements I used due to difference in voltage (halogens use more power). Is there a way to resolve this indicator on my dash without turning off the DRL?

@VirarAutomotive 6 ай бұрын

Glad it helped! There are some aftermarket solutions for the DRL warning cause of LED, but I don't know of one specifically. Sorry :(

@NadaSurfinAB 6 ай бұрын

I couldn’t get my high beams out. Removing the wire clips must have been the trick - which is the step that isn’t in the owner’s manual. Replacing bulbs should never be this difficult.

@VirarAutomotive 6 ай бұрын

Yeah I remember struggling with it too trying to figure it out the first time. Could have been easier, but I hope you found this video helpful in the process.

@GenXMafia 6 ай бұрын

My low beams are nothing like yours. Mine has a warning on the back cap that says do not remove high voltage. It’s got some funky kind of bulb it I’ve never seen before in my life. And I’ve changed a lot of bulbs in my day.

@VirarAutomotive 6 ай бұрын

Yeah you likely have the Touring or Ultimate or any of those higher end trims that has the HID bulbs on it. Unfortunately that will be a different process that this video doesn't cover. :(

@daybyday835 8 ай бұрын

In my 2012 touring there is like a canister protecting the connector. Not as easy access as shown in the video.

@VirarAutomotive 8 ай бұрын

Thanks for sharing!

@SuperThreeboys 8 ай бұрын

Press down and slide down is where I'm stuck! It won't come off😢

@VirarAutomotive 8 ай бұрын

Yeah it takes a while to get it off sometimes. When I tried it the first time I struggled with it a couple mins before I figured it out. It gets stuck over the years due to dirt and moisture.

@vikasravindran1312 7 ай бұрын

Passenger high beam bulb was really tough with very tight space, and it was kind of stuck since I never changed for 9 years. Finally I had to use an adjustable wrench to turn and get the bulb out from the headlight hole . Wrench gave some leverage and was able to turn, came out pretty quickly

@VirarAutomotive 6 ай бұрын

Yeah its not the most accessible vehicle to work for you for headlight bulbs. Hopefully you found the video helpful during the process

@knfpumps 7 ай бұрын

My 2011 ody 100K miles gave me problems from the get go to install new LED bulbs. First, you need smaller, strong hands, (think Japanese worker) not older, larger, arthritic hands to access the sockets. All 4 bulbs were stuck and very difficult to turn to get out of the housings. On the passenger side, I moved not only the PS tank but the wiper tank as well. I loosened the battery also to get another 1/4" of room. Still had to get a pliers down there to get some leverage to turn the bulb. I replaced the new blue gaskets with the old orange ones. Took me 2-3 hours to accomplish. 10 minutes is BS, maybe for a brand new car.

@VirarAutomotive 6 ай бұрын

I guess I have been told my many people on my videos that I do have smaller hands, so I must have smaller hands. Sorry to hear that you had it was a lot more time consuming for you. Hope the video helped give some direction during the process however.