How to Replace Low Beams In a 2013 Ford Fusion with Lasfit LA Series H11 Bulbs

Рет қаралды 275,046

6 жыл бұрын

👉15%-25% huge discount on the best-selling LAplus series LED bulbs! Don't miss out!
www.lasfit.com/products/h11-h...
👉Get Your Free Test of the Newest 2023 LED Bulbs at Lasfit! Join us now to grab this limited-time offer. Don't miss out!
LINK: www.lasfit.com/pages/syle-vid...
Low Bean H11 LED bulbs
www.lasfit.com/products/h11-h...
Fog lights H11 LED bulbs: www.lasfit.com/products/la-pl...
License plate lights: www.lasfit.com/products/2x-la...
Backup lights: www.lasfit.com/products/lasfi...
3.If you're interested in testing Lasfit products, please contact us by email(youtube@lasfit.com).
You'll have a chance to get sponsorship from Lasfit. Please tell your vehicle make, model and year.
Thank you all for your support to Lasfit.
Below LEDs fit Ford Fusion:
Low beam: Upgraded version, LAplus series H11 LED bulbs, bigger output flux beam, stronger stability.
www.lasfit.com/products/h11-h...
Fog light H11: www.lasfit.com/products/la-pl...
License plate lights: www.lasfit.com/products/2x-la...
This video will teach you how to install Lasfit H11 headlight bulbs into the low beams of a 2013 Ford Fusion.
Buy Lasfit LED bulbs with confidence:
* 45 days money-back guarantee
* 45 days free-return without stocking fee
* 1-Year hassle free warranty
* U.S. customer support
* Installation service(Plz make your reservation in advance)
* Pick up in our company based on Ontario, California.(Plz make your reservation in advance)
The LED headlight bulbs in the video is LASFIT old version, which is out of stock now. Upgraded version is LAplus series.
Reverse light: www.lasfit.com/products/lasfi...
License plate light / trunk light, T10 LED bulb: www.lasfit.com/products/2x-la...
NOTE:
This video is for product informational purposes and may show street use content. The video is not intended to imply vehicle specific street legality. The product is street legal in the USA for Fog Light use. The product is not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Certain specialty vehicles strictly limited to off-street use and not having DOT registration or license plates may use these products exclusively off-streets. International street-legality varies by country.
Follow us on Social Media:
/ lasfitautolighting
/ lasfitautolighting
If you have any questions feel free to contact us by:
Email: lasfitautolighting@gmail.com
Phone: (909) 758-7900
Or come visit us at our shop:
2235 E 4TH ST STE F, ONTARIO, CA, 91764

Пікірлер: 180

@lasfitvehiclelife Жыл бұрын

Limited sponsorship for Newest LED Bulbs Testing Provided. Don't hesitate to contact us to grab this opportunity. 1. Contact email: youtube@lasfit.com 2. Please tell us your vehicle make, model and year

@moussaniang4445 4 жыл бұрын

You have no ideaaaa how much this video helped a lot of fusion owners. You Sir, are a savior 💯💯💯

@lasfitvehiclelife 4 жыл бұрын

😎😎😎😁😁😁👍👍👍

@Alaskan_Two_Spirit_Wolf 2 ай бұрын

Thank you for this part right here. I was able to take off n replace headlights from another mechanic video but not able to get back on with what they show. But your video helps. I think 😅 I had so much trouble last night. About to check to see if your video helped. 😊

@AquivaStar 5 жыл бұрын

Of all the videos on KZfaq on how to remove the headlights from the Fusion, this is the easiest and most detailed! Thanks a million!!!

@lillylove4790 5 жыл бұрын

Johann Botha I agree, all the other videos require you to either lift the car and use special equipment and use words I don’t understand lol even I can do this myself now !

@rgruenhaus 5 жыл бұрын

You try getting those bumper corner covers back on and to stay! The system of clips to hold the upper fender with the bumper cover is the weakest ever. I worked in body work years ago and bolts were the best way to secure sections of fender.

@ChrisFindley 3 жыл бұрын

Brother, you saved my life last night. I'd watched half a dozen other vids before diving into this job, trying to find the cleanest method. Several mentioned 'you don't have to take off the bumper but here I go anyway' and I couldn't find anyone specifically identifying what the minimum job looked like. Two hours later I'm still trying not to take off the bumper. I'd managed to get one H11 out of the housing but could not get enough leverage on the bulb to twist it back into a locked position. So many swear words and screws on the floor appeared as I dug deeper and deeper into the bumper and surrounding hardware. I was giving up and accepting that I had to take it all the way off, plus skip sleep altogether to finish before the wife needed to drive to work. Then I came across the first 3 minutes of your video and it was like rain-clouds being destroyed by pure sunlight. A few minutes later I had the bumper loose enough to pull the headlight housing forward and finally get my hands on that little explicative. Another few minutes after that the other H11 was done and it was just a matter of putting all those unnecessarily removed screws back in place. Now replacing the low beams feels like it would be less than a 30 minute job. Thank you, thank you, thank you.

@lasfitvehiclelife 3 жыл бұрын

Wow, that's great. 👍 We're glad this vidoe is helpful for you. Are you satisfied with the LED bulbs?

@XxGpZXX 5 жыл бұрын

This video helped so damn much. Crooks at dealers and local mechanics wanted to charge so much and this is the only video that actually showed how to correctly do this.

@stevebrown162 Жыл бұрын

It takes about an hour to do that. Should people work for free? They should charge you about $120-150 to install them, at todays rates.

@StarTurtleZero 5 жыл бұрын

Thank you for taking the time to put together a detailed and easy to follow video. The other videos were either too involved to remove the entire front bumper or didn’t provide sufficient room if you didn’t remove the clips of the bumper. This is easily the best solution.

@soljah94 5 жыл бұрын

Thanks for this video! I just finished replacing my low beam bulbs on my 2014 Ford Fusion. I had a few extra screws that needed to be undone that we're not shown in this video. Other than that, great video and It made my job much easier! Thank you!

@lasfitvehiclelife 5 жыл бұрын

Thanks for your feedback, which is useful for other guys.

@mafiaspyder504 4 жыл бұрын

I swear I did the installation today May 17 2020 not hard but time consuming thanks for the video I literally did it because of this specific video make it look easy. I also bought the LASFIT LEDs change the low beam and fog lights. You helped me save some money!

@lasfitvehiclelife 4 жыл бұрын

Wow, great! 👍👍👍👍👍👍

@jeffh6889 Жыл бұрын

Awesome video, brotha. I'm doing this repair for a friend later today and this is exactly what I needed so I'll be prepared. You are appreciated!

@americanwoman7324 5 жыл бұрын

Thanks brother, saved me the cost of labor!

@vertboyz 4 жыл бұрын

the best video yet this was real easy this way -- thank you

@neoknight14215 Жыл бұрын

Thanks you gave the full breakdown while many others skipped over the full visual.

@lasfitvehiclelife Жыл бұрын

Glad it's helpful for you. 😊

@omarvela7135 4 жыл бұрын

Thank you so much...you bailed me out big time! I appreciate it!

@lasfitvehiclelife 4 жыл бұрын

That's great. 👍

@damineo1322 6 жыл бұрын

Great video !!! Do more about this car.

@BrayanFrias402 3 жыл бұрын

Of all the videos that I have been looking for, yours is what is the best that best explains Thank you I did it and I look good

@lasfitvehiclelife 3 жыл бұрын

Glad it helped. What's the year of your Ford Fusion?

@ireign7579 4 жыл бұрын

Great video. Helped me out a lot. Took only 45 minutes

@lasfitvehiclelife 4 жыл бұрын

Glad it helped。 😀

@hoagybob 4 жыл бұрын

An excellent video that covers very important details. This isn't a simple job.

@lasfitvehiclelife 4 жыл бұрын

Thank you.

@kevinengle2000 2 жыл бұрын

Excellent job explaining everything

@lasfitvehiclelife 2 жыл бұрын

Glad it helped.

@neilreid9005 5 жыл бұрын

Really good instruction- great job. Am going to order the LED's for my 2016 Fusion from you guys. Well done.

@kelvo1k505 4 жыл бұрын

Neil Reid I have a 16 also , did you end up ordering ?

@neilreid2298 2 жыл бұрын

@@kelvo1k505 - Yes.

@Flex4LX Жыл бұрын

I replaced mine today. I have small hands so I just reached down and twisted out the bulb. Then I just removed the screws from the housing as well as the ones on top of the bumper just for slight wiggle room. I pushed the new bulb in the housing by twisting and fidgeting around until it locked in place. Thats it. 10 minutes tops.

@lasfitvehiclelife Жыл бұрын

Great! Thank you for your feedback. May I ask the year of your Ford Fusion?

@4080Project 4 жыл бұрын

I ordered two pair, low beams and fogs...thanks for the video!

@lasfitvehiclelife 4 жыл бұрын

Thank you for your support to Lasfit. What's the year of your fusion?

@4080Project 4 жыл бұрын

@@lasfitvehiclelife 2013, noted in the order, went with the Plus series so it fits and able to rotate from what I read, costly but hopefully last pair I have to purchase!

@lasfitvehiclelife 4 жыл бұрын

@@4080Project Looking forward to your feedback about how they work on your fusion 😀😃

@4080Project 3 жыл бұрын

Getting the lamps out was a pain! Couldn't get the passenger light level, slight blind spot on far right turns! I'm too lazy to pull out again to fix. 3 out if 4 lights are great, no issues!

@usmcgrunt02 2 жыл бұрын

DO you stuff the ballast and everything behind the rubber weatherseal?

@mgreene5150 2 жыл бұрын

This was a very helpful video. Thank you. On future videos, it would be helpful to know what size bolts and torx bits we would need.

@lasfitvehiclelife 2 жыл бұрын

Great suggestion! We'll do. Thank you!

@zachg2081 3 жыл бұрын

I’m glad I found this video bc I just put lasfit leds in my low beams and put them in however and the pattern seems off and kind of dim so now I’m gonna check

@lasfitvehiclelife 3 жыл бұрын

Hey, you can adjust the beam pattern by turning the LED bulb.

@ronaldsmith6367 Жыл бұрын

Great job and simple. Thanks

@lasfitvehiclelife Жыл бұрын

Glad it was helpful!🙂

@dumper707 4 жыл бұрын

Great way to explain

@lasfitvehiclelife 4 жыл бұрын

Is your car 2011 Ford Fusion?

@coolissimo69 Жыл бұрын

What a saviour.Thanks bro.

@lasfitvehiclelife Жыл бұрын

Happy to help.

@joeg.1119 5 жыл бұрын

How the lighting out put is it good? Is not too bright cause I don't want to blind other driver when I be driving please let me know so I can buy this.

@lasfitvehiclelife 5 жыл бұрын

Don't worry, no blinding. I recommend the upgraded version to you, LAplus series, here is the link: bit.ly/2Xsitbi

@xXguardian951Xx 3 жыл бұрын

Better than removing the whole bumper, and way better than doing oragami with your hand to not remove the bumper, great video!

@lasfitvehiclelife 3 жыл бұрын

For most vehicles, it no needs to remove the bumper if the headlight housing is big enough to hold your hand to reach the stock lights. What's your vehicle make, model and year?

@mitchlopez7408 3 жыл бұрын

Thanks it worked awesome it was a little different because i have 2015

@lasfitvehiclelife 3 жыл бұрын

Sounds great. 👍

@Sethry_ 3 жыл бұрын

Do your headlights flicker? I read that was a common problem

@royjimenez6789 Жыл бұрын

Thank you so much for the information

@lasfitvehiclelife Жыл бұрын

We are glad that this video can help you! Could you please kindly tell us the year and the trim of your Ford Fusion and whether you purchased lasfit product?

@royjimenez6789 Жыл бұрын

@@lasfitvehiclelife is a Ford fusion 2014 and I did buy the bulbs and Advance

@lasfitvehiclelife Жыл бұрын

@@royjimenez6789 Thank you for your reply. If you purchased Lasfit H11 LED bulbs, could you please share us with some pictures or videos about the installation or the visual effect? You can get support from us if you have any problems with Lasfit products.

@FadeToBlackLLC 4 жыл бұрын

I just sold a set to a customer with a 2013 Ford Taurus and I think he needs to adjust like you mentioned.

@lasfitvehiclelife 4 жыл бұрын

LAplus series H11 is adjustable socket. After locking it on headlight housing, you can rotate it to adjust the beam pattern.

@mrmister8546 5 жыл бұрын

Thank you!! Great video. Appreciate it!!

@mikejr2435 4 жыл бұрын

Any special or specific tools needed to take off any of the pieces that need to be removed

@lasfitvehiclelife 4 жыл бұрын

flat head, a 10 mill and ratchet possible extension if needed.

@jmdrno 5 жыл бұрын

I recently installed these very bulbs on my 2016 Fusion. Looks great! But this morning I ran into a small problem, I found that my headlights fogged up. It’s been extremely humid the past couple of days so that may be the cause. Also when I installed the bulbs I was not able to put back the dust cap bc the back side of the bulb would be touching and I didn’t want to risk anything. So you have a suggestion as to how to fix and avoid it from happening later?

@lasfitvehiclelife 5 жыл бұрын

You could turn on headlights about 10-20 minutes, because the LED bulbs generate heat when they are working, which could evaporate the moisture

@JBIRD98 4 жыл бұрын

My 19 don’t have to remove the headlight but I think you gotta cut the housing to fit led I bought the auxbeam h11 s2 and they won’t go because of length

@lasfitvehiclelife 4 жыл бұрын

Hi, we didn't cut the housing. But now, we have new LED bulbs, smaller size. We tested these LED bulbs on 2019 Fusion's low beam, perfect fit: www.lasfit.com/products/h11-h9-h8-led-headlight-fog-light-la-series?Social&YTB%20Channel&LAplusH11-LB

@dougwitherby3291 3 жыл бұрын

Well done 👏

@lasfitvehiclelife 3 жыл бұрын

Thank you 😁

@justderek9147 5 жыл бұрын

So the rubber weather cap stays off ? If it stays on can the fan on back of bulb still remove enough heat to be efficient?

@lasfitvehiclelife 5 жыл бұрын

you would have to modify the cap a bit to allow it to get back on. And yes it should still work with no problem due to the hot air is able to go out though the headlights vents.

@rgruenhaus 5 жыл бұрын

Modify the cap? Bad engineering!

@lasfitvehiclelife 5 жыл бұрын

@@rgruenhaus You could use an after-market rubber cap

@markcrew3696 5 жыл бұрын

I understand what you're saying these lights have little fans on them if you put the cap on will it make it too hot I thought about just cutting a small little hole so air can get in there but I'm just going to keep tabs on mine when my lights are on I'll check and see if it's getting too hot in there if it is I'm a put a little slat or slit our little hole for the fan to get air but I would not recommend taking off that entire dust cap and just discarding it. I would put a little small hole in it but wait and see how hot it gets in their first. This is a great question I ran across the same thing.

@JoseArias-jr7lx Жыл бұрын

I’m thinking about doing to to my low beams and high beams and day time running lights

@lasfitvehiclelife Жыл бұрын

Sounds good. Looking forward to your update. If you need any support, feel free to contact us. :)

@lasfitvehiclelife 4 жыл бұрын

Buy LED low beam bulbs + license plate lights = 5% OFF Upgraded version low beam bulbs, LAplus series H11: www.lasfit.com/products/h11-h9-h8-led-headlight-fog-light-la-series?Social&YTB%20Channel&LAplusH11-LB License plate lights: www.lasfit.com/products/2x-lasfit-t10-192-194-168-158-led-interior-light-bulb-error-free-1-year-warranty?Social&YTB%20Channel&L-T10-White

@flyboy8364 4 жыл бұрын

Why do my new LED headlight's flicker a little when I use my turn signals?? 2014 fusion hybrid

@lasfitvehiclelife 4 жыл бұрын

Don't worry. When you use your turn signals, the current is not table, so the headlight is a little flickering.

@flyboy8364 4 жыл бұрын

@@lasfitvehiclelife thank you for replying, is there a way to fix it?

@jw6210 2 жыл бұрын

Any tips on removing the headlight? Mine seem to be stuck on the guide pin.

@lasfitvehiclelife 2 жыл бұрын

Hello, do you need to remove the entire headlight assembly? What problems are you running into?

@joshuagutierrez3506 3 жыл бұрын

I tried putting led bulbs in my 2019 Ford Fusion and it didn’t create a good pattern, is it bc I have reflector headlights?

@lasfitvehiclelife 3 жыл бұрын

Hi, did you try to adjust the beam pattern? BTW, did you purchase LED bulbs from lasfit.com? or you bought from other brands?

@kelvinclaxton4026 4 жыл бұрын

Do you have a video for the fog lights as well?

@lasfitvehiclelife 4 жыл бұрын

We don't have a video for the fog light. For 2013 Fusion, the fog light is H11, the same bulb size as low beam. You can find the fog light location, and twist it out, then install LED bulbs. H11 LED bulbs fit fog lights for 2006-2018 Fusion: www.lasfit.com/products/la-plus-series-h8-h11-h16-led-fog-light-bulb?Social&YTB%20Channel&LAplusH11-fog

@kevindiaz3459 7 ай бұрын

I tried this without popping out the bumper, I just can't get my hand in there. Saw a video where someone was able to just loosen the headlight and get it, but it looks like I will need to use this method instead to replace the low beams. My hands are too big. Nice to see it isn't hard to get the bumper to come out. Just hate dealing with those clips!

@lasfitvehiclelife 7 ай бұрын

Yes, there are two options for vehicle owners to replace the factory halogen bulbs, one is to take off the bulb from the hood, but sometimes it is hard to do that, the other you can try is to take off the bumper and replace the bulb.

@jeeptj08 5 жыл бұрын

How do you adjust the LED light?

@lasfitvehiclelife 5 жыл бұрын

LA series LEDs need to take out the screw on the socket retainer, then adjust the socket. LAplus series is an upgrade version, 360° adjustable, you could get more information for LAplus series from this link: ebay.to/2zW7j4P

@reeseyoung7282 3 жыл бұрын

I got these but the leds flicker when I turn my turn signals on what should I get a decoder?

@lasfitvehiclelife 3 жыл бұрын

Hello, did you change your turn signal lights to LEDs?

@lasfitvehiclelife 4 жыл бұрын

New video for 2019 2020 Ford Fusion LED headlight bulbs installation: kzfaq.info/get/bejne/qa-frNxpqqrbmWw.html

@antoniopagan3990 4 жыл бұрын

Are these bulbs low beam and high beams?

@lasfitvehiclelife 4 жыл бұрын

@@antoniopagan3990 These LED bulbs fit low beam only. High beam is H7. Could you take a photo of your high beam bulb, and the factory headlight housing to send us for a look? If the high beam bulbs come with a retainer holder, the standard H7 LED bulbs do not fit. We'll recommend compatible LED bulbs to you. contact email: cs@lasfit.com

@jaimevillanueva5131 2 жыл бұрын

Hi. Wanted to see how I can resolve the flickering headlight when I activate my blinker? I installed the Lasfit LED.

@lasfitvehiclelife 2 жыл бұрын

Hello, what's your vehicle make, model and year? You have installed Lasfit T series LED turn signal bulbs, right?

@jaimevillanueva5131 2 жыл бұрын

@@lasfitvehiclelife 2014 Ford Fusion and i installed LA Plus Series H11 H9 H8 LED Bulb 60W 6000LM 6000K Amplified Flux Beam

@lasfitvehiclelife 2 жыл бұрын

@@jaimevillanueva5131 They only flicker when you activate your blinkers, right? Could you kindly shoot a short video for showing your issue? It will help us know more details and fix the issue soon. Thank you!

@jaimevillanueva5131 2 жыл бұрын

@Lasfit Auto Lighting I created the video but I’m not an expert with tagging. I think I did it correctly.

@westonhalstead8636 3 жыл бұрын

How did you change the orientation of the white part?

@lasfitvehiclelife 3 жыл бұрын

Hi, the socket of the upgraded version is adjustable, you can rotate the LED bulb to change the orientation: www.lasfit.com/products/h11-h9-h8-led-headlight-fog-light-la-series?Social&YTB%20Channel&LAplusH11-LB

@TOPBOSSJAMES 4 жыл бұрын

Is the collar rotation gonna be the same for the driver side?

@lasfitvehiclelife 4 жыл бұрын

Yes, the same direction. What's the year of your Fusion?

@TOPBOSSJAMES 4 жыл бұрын

@@lasfitvehiclelife its a 2016

@vendrick4571 2 жыл бұрын

I installed some LEDS and now I have a B1D00, B1D03, and a B1D02 codes popping up anyone know how to fix that???

@MarceloAVillegas 2 жыл бұрын

I bought these but they didn’t come with the wiring harness, so they are flickering… do you have a solution for this?

@lasfitvehiclelife 2 жыл бұрын

Hello, what's your car make, model and year?

@MarceloAVillegas 2 жыл бұрын

@@lasfitvehiclelife I have a Ford Fusion SE 2014

@kevinjackson8422 3 жыл бұрын

I just upgraded my DRLs to LEDs, they only come on when the low beams are turned on, any suggestions?

@lasfitvehiclelife 3 жыл бұрын

Hi, what's your vehicle make, model and year? Did you purchase LED lights from Lasfit?

@kevinjackson8422 3 жыл бұрын

@@lasfitvehiclelife 2014 Ford fusion no I did not purchase of that brand

@lasfitvehiclelife 3 жыл бұрын

@@kevinjackson8422 Ok. We suggest you ask your dealer for help. We're not sure how you upgraded your DRLs to LEDs

@torysanders3806 6 жыл бұрын

Thanks!

@YourPointOfViewPodcast 4 жыл бұрын

I fit my hand back there it was hard though

@cryptomomentz 6 жыл бұрын

looks like a 2013 breh

@bigboycervantes5240 5 жыл бұрын

You have something for 06 ford fusion

@lasfitvehiclelife 5 жыл бұрын

Yes, below LED lights fit 06 fusion: LED headlight low beam: www.lasfit.com/products/h11-h9-h8-led-headlight-fog-light-la-series Reverse light: www.lasfit.com/products/lasfit-t15-912-921-led-interior-reverse-backup-trunk-center-high-mount-stop-dome-light-bulbs-6000k-pure-white Front turn signal light: www.lasfit.com/products/3157-switchback-led-turn-signal-lights-canbus-error-free

@janinelehiy5169 Жыл бұрын

This is exactly what wasn’t done I had horrible light pattern shines on the shoulder instead

@lasfitvehiclelife Жыл бұрын

Please check if the LED chips toward at 3 and 9 o'clock.

@dennybirchfield 2 жыл бұрын

U can reach it without taking out the while light

@lasfitvehiclelife 2 жыл бұрын

Yes.

@ReassuringSmile 4 жыл бұрын

Is that CANBUS required?

@lasfitvehiclelife 4 жыл бұрын

No CAMBUS is required.

@abdulrehmanmalik5484 2 жыл бұрын

Do u guys sent to europe? I wanto order

@lasfitvehiclelife 2 жыл бұрын

Hello, it's a pity to tell you that we don't ship to Europe at present.

@myboringadventures 4 жыл бұрын

Weird, my 13 had a clip in that tab on the bumper cover to fender.

@lasfitvehiclelife 4 жыл бұрын

You need to remove the clip, right?

@myboringadventures 4 жыл бұрын

@@lasfitvehiclelife yes. The bumper cover wouldn't pull away from the fender.

@lasfitvehiclelife 4 жыл бұрын

@@myboringadventures ok. Welcome to share some pictures with us. 😀😃😁

@myboringadventures 4 жыл бұрын

@@lasfitvehiclelife I'll try when I rip into it again

@gemini212102 3 жыл бұрын

What site can i buy some for 2016

@lasfitvehiclelife 3 жыл бұрын

For 2016 Ford Fusion, the headlight low beam also is H11: www.lasfit.com/products/h11-h9-h8-led-headlight-fog-light-la-series?Social&YTB%20Channel&LAplusH11-LB

@lasfitvehiclelife 3 жыл бұрын

For 2016 Ford Fusion, the headlight low beam also is H11: www.lasfit.com/products/h11-h9-h8-led-headlight-fog-light-la-series?Social&YTB%20Channel&LAplusH11-LB

@1_luismm 3 жыл бұрын

@@lasfitvehiclelife so are these better and easier to fit than the previous version? I just ordered some

@lasfitvehiclelife 3 жыл бұрын

@@1_luismm Sure. This is upgraded version. Will you install them by yourself?

@1_luismm 3 жыл бұрын

@@lasfitvehiclelife yes

@kevinwhite6304 4 жыл бұрын

You do not need to remove those 2 10 mm bolts. You only need to remove the black torx and the silver torx.

@lasfitvehiclelife 4 жыл бұрын

Thank you for your feedback. 👍 It's easier to remove the headlight if remove those 2 10mm bolts.

@samliang4146 5 жыл бұрын

its not ok, OK?

@ChrisAutoBurleson Жыл бұрын

left out 2 bolts under headlight

@MrHunt916 10 ай бұрын

Why do they have to make something as simple as a HL so damn hard to replace ?

@lasfitvehiclelife 10 ай бұрын

LOL. Some compact-size vehicles' headlight housing is too narrow to reach the headlight bulbs, and it has to be removed the whole headlight and install the LED bulbs.

@ghostsaintpatrick3959 2 жыл бұрын

You didn’t show how to remove the head lamp housing

@lasfitvehiclelife 2 жыл бұрын

Hi, it doesn't need to remove the headlight housing, You can reach the stock halogen bulbs and replace them with the LED bulbs.

@davegallop9357 5 жыл бұрын

I like the way you don't show that the standard rubber covers don't actually fit properly over the cooled (fan fitted) LED lamps and you conveniently fail to show that! I believe you should be a wee bit more honest about that, as it ultimately will allow water ingress into the lamp unit and result in a destroyed entire unit!

@lasfitvehiclelife 5 жыл бұрын

Thanks for your suggestion.😊 As we know, these LED bulbs fit on most of vehicles perfectly. If we have the situation as you said, we'll display and tell how to fix it. We're collecting more ideas, and surely show more details in our videos.

@MrMonster2020 5 жыл бұрын

This is not a 2012, 2012 was old body style fusion

@lasfitvehiclelife 5 жыл бұрын

Yes, you're right. We revise the year in the title. Thank you

@thomasn7025 5 жыл бұрын

Wrong year. Changed fusion for 2013.

@lasfitvehiclelife 5 жыл бұрын

Thank you, just revised the year. for 2006-2018 Fusion, the low beam is same bulb size, H11.

@kickadams8908ass 2 жыл бұрын

All that just to change a bulb. I see why they're discontinuing this car.

@agenericaccount3935 2 жыл бұрын

Yeahhh, thanks Ford. 27 clips and fasteners, bumper removal. To replace a headlamp bulb. Special place in hell for design engineers who have never worked on cars.

@ctsstxc 3 жыл бұрын

On my 2015, the clips are diffrent.

@lasfitvehiclelife 3 жыл бұрын

Could you take some photos of your clips to send us for a look by email? cs@lasfit.om

@rgruenhaus 5 жыл бұрын

The first thing you say in the video is that you are working on a 2012!

@lasfitvehiclelife 5 жыл бұрын

It is 2013 Fusion 😂

@DanielSanchez-vg3pz 3 жыл бұрын

Chanse si iso eras tu video en español tendrías mucho más vistas. Por ejemplo yo

@lasfitvehiclelife 3 жыл бұрын

Gracias por tus sugerencias.

@iMr.Jetpacks 4 жыл бұрын

This is not a 2012, I had a 2012 and it was the other body style!

@lasfitvehiclelife 4 жыл бұрын

Hi, this is 2013 Ford Fusion. Do you want to replace the OEM headlights with LEDs for your 2012 Fusion? The low beam bulb size also is H11, here is the link: www.lasfit.com/products/h11-h9-h8-led-headlight-fog-light-la-series?Social&YTB%20Channel&LAplusH11-LB