How to Replace Power Steering Box in a Pontiac Firebird or Chevy Camaro Chevelle Nova PART 5

Рет қаралды 15,437

3 жыл бұрын

How to replace the power steering box in an early Pontiac Firebird or Chevy Camaro in our Muscle Car Build Project. This same power steering box can be found in a ton of General Motors cars and trucks such at the Chevy Nova, Chevy Chevelle, Chevy Pick Up Truck, Pontiac GTO, Pontiac Le Mans, and more!
This job takes about 30 minutes if you have all the tools you need, mostly just hand tools except for the pitman arm puller which you can rent for FREE from your local auto parts store.
This thing is HEAVY, so have a friend on hand to help you get it out of the muscle car, once out you will have to rebuild it or replace it.
#pontiacfirebird #powersteeringbox #steeringbox

Пікірлер: 53

@lrooster7247 4 ай бұрын

Enjoyed, great video

@ArrowheadGarage 4 ай бұрын

Glad you enjoyed it

@zuluchorizo24739 3 жыл бұрын

Thanks for this video man! Gonna do this to a 79 camaro this week!

@ArrowheadGarage 2 жыл бұрын

Glad I could help, should be really close to mine! Good luck on the job.

@martysheets6882 3 жыл бұрын

Thanks for sharing your expertise Brother.

@ArrowheadGarage 3 жыл бұрын

Hope it helps Marty!

@b3c162 2 жыл бұрын

Great video!

@ArrowheadGarage 2 жыл бұрын

Glad you enjoyed it, and it helped you out.

@timg8045 2 жыл бұрын

I’ve been watching your videos on this build. You’ve done a great job with this car! I’ve learned some good stuff here. Keep up,the good work! 👍🏻

@ArrowheadGarage 2 жыл бұрын

Awesome, thank you so much!!

@FreeSwimmer 7 ай бұрын

Old video thats new to me. Good stuff man !! I had a red 67' Bird years back and recently inherited a 1970 Nova.. Basically the same gearbox swap. The Nova came with a manual box and was switched to power. Its a functoinal but debatable setup. Im pulling engine asap and when I do Im gonna install a new manual gearbox again. 1 less belt running and in the way.

@chavezepps7398 3 жыл бұрын

Great video. My box is leaking so I’m thinking of pulling it off as well. Just need figure out best options for a New one

@angellizarraga6050 6 ай бұрын

Buen video gracias

@miguelolmedo9178 22 күн бұрын

I lost my steering on my 74 el camino. I thought it was the power steering pump that went out. Turned out to be the steering box instead, i can see fresh oil coming from the battom of the pitman arm area. Now i have to get this done soon.

@ss66chevy 5 ай бұрын

Great video. I was thinking i had to pull the header to get the box out from the bottom. Now i know I don't have to go that route. I'll go with a close ratio box.

@ArrowheadGarage 5 ай бұрын

Glad I could help

@chriswilliams8926 3 жыл бұрын

I put a CP 500 steering box in my 67 Camaro. Fit like a charm. They are 360 bucks on summitt. FYI.

@ArrowheadGarage 3 жыл бұрын

Thats not a bad idea Chris!!!!!! I called a few junk yards and they wanted $150 for a pull a part box... HUMMMMM... thanks for watching and giving me a great idea!!

@billmitchell7731 11 ай бұрын

Like number 383. Awesome rebuild. New subscriber from Arkansas. I may not comment everytime but I always leave a like 👍🏻👍🏻👍🏻

@ArrowheadGarage 11 ай бұрын

Thanks for the sub! I did some partying in Little Rock back in the day lol fun times for sure... just don't tell the misses lol JK lol

@kevinsorey9649 3 жыл бұрын

If there is a lot of play in the steering could it also be a worn-out steering box, I have a 68 Camaro where I'm looking into replacing a steering box, my guess is I wore the steering box out moving it on tow trucks when it was broke down

@ArrowheadGarage 3 жыл бұрын

Yep, we had to just replace the whole unit in the Firebird with a reman. Thanks for watching and dropping a comment. Appreciate it!

@ripptide56 3 жыл бұрын

I would go ahead and just swap to a quick ratio box(Lares 1353).

@ArrowheadGarage 3 жыл бұрын

I might just pick up the 1353,thanks for the tip!

@leehowell1225 2 жыл бұрын

That I know how to do I needed to know how to reseal it ,.the big nut on the top end won't come loose .

@ArrowheadGarage 2 жыл бұрын

Gotta bang on it, or heat it up.

@bigjplay3127 Ай бұрын

Can you just take out the 1 bolt that holds the splined end of gearbox and not take out the ones for the ragjoint?

@DYCKnights Жыл бұрын

How did you get that 35 nut off ? I think I missed that part

@ArrowheadGarage Жыл бұрын

Used an adjustable wrench, a big one!!

@DYCKnights Жыл бұрын

@@ArrowheadGarage thanks got it

@BigGixx23 3 жыл бұрын

I would say build it, however, I'm really concerned on the needle bearings

@ArrowheadGarage 3 жыл бұрын

I am going to tear into this box but be ready to just buy another for sure! Thanks for watching and the suggestion on the needle bearings.

@williamrobards6458 2 жыл бұрын

How much did you end up paying for a reman one? Do you have the brand and part number please?

@ArrowheadGarage 2 жыл бұрын

I paid about $175.00 picked it up from Car Quest. These boxes are just about all the same, just look up your year and model and. you should be golden! Thanks for watching

@angelmarrero4566 11 ай бұрын

Do you know the serial# for the small oil filter?

@ArrowheadGarage 11 ай бұрын

On which engine?

@angelmarrero4566 11 ай бұрын

67 firebird.

@angelmarrero4566 11 ай бұрын

@@ArrowheadGarage 67 firebird.

@StoneColdMike 7 ай бұрын

Do you install the same way you remove?

@ArrowheadGarage 7 ай бұрын

Sure did, install is just reverse of removing it. Thanks for watching.

@StoneColdMike 7 ай бұрын

@@ArrowheadGarage thanks for responding

@StoneColdMike 7 ай бұрын

@@ArrowheadGarage i had another question. Ive been having oil pressure issues and did some research online. There is a hidden oil galley plug behind the plug of the rear of the motor. So i took out my motor and put the oil galley screw in and got good pressure. Do i need to put plug in the access hole again or can i leave it without the plug?

@phoenixblack1220 Жыл бұрын

Hi, take this from someone who has been working on F bodies for 35 years. Put that box in the trash and just get a remanufactured quick ratio from National Parts Depot. Rebuilding a steering box is not for the faint of heart.

@ArrowheadGarage Жыл бұрын

Lol that’s what I did, new unit and ready to go thanks for sharing your wisdom with us! Appreciate it!!!

@VinylVillageGarage 2 жыл бұрын

I have never seen a seized up gear box. That thing is a hot mess.

@ArrowheadGarage 2 жыл бұрын

It must have had water/snow/ice get thru the bearing fitted hoses, when I took it apart to rebuild, couldn't even get it to full disassemble. lol tring to get car on the trailer and then how the hell I was going to get it off was at least a six pack of Coors Light. lol