How to Replace Rear Brake Pads & Discs on an Astra 'H' (Holden, Opel, Vauxhall)

No video

How to Replace Rear Brake Pads & Discs on an Astra 'H' (Holden, Opel, Vauxhall)

Рет қаралды 40,308

Күн бұрын

A video showing how to replace the Rear brake pads & discs on a 2008 Astra H 2008 (2004-2009) model
Please Subscribe & Give the Thumbs up...
#tutorial #astra #holden

Пікірлер: 49

@jacklapa4779 4 жыл бұрын

My first go on changing my brakes I had to call a mechanic but I followed every steps you’ve shown and I’m actually impressed with myself because it actually worked, no mechanic needed Thanks a million bro gave you a thumbs up

@RossPerryProductions 4 жыл бұрын

Hi Jack, good work and I am, glad I could help, hopefully saved you a few bucks at the same time. Please give the thumbs up on the video. Regards Ross

@bradfenton8303 2 жыл бұрын

The best well explained video I have seen.

@RossPerryProductions 2 жыл бұрын

Hi Brad, thanks for the comment and positivity. I try my hardest to make the video clear and easy to follow. Ross

@danieldanso2133 Жыл бұрын

Great video, Systematic and detailed. Keep it up Sir

@RossPerryProductions Жыл бұрын

Thanks Daniel!

@johnlawson7088 4 жыл бұрын

Easy to follow and understand good video. Thanks

@RossPerryProductions 4 жыл бұрын

Hi John, Thanks for your comment, please remember to like and subscribe

@sospilot7167 2 жыл бұрын

Thanks mate, great video and instructions.

@RossPerryProductions 2 жыл бұрын

No Worries at all thanks for watching.

@julianharvey6584 Жыл бұрын

Thank you.

@RossPerryProductions Жыл бұрын

No worries at all, thanks for watching and your comment. Ross

@Jacksonknox834 4 жыл бұрын

Easy to follow great video thanks.

@RossPerryProductions 4 жыл бұрын

Thank you very much :) please give the video the thumbs up.

@toomuchinformationforu9919 3 жыл бұрын

an excellent video ,thanks for posting

@RossPerryProductions 3 жыл бұрын

No worries at all, thanks for watching please remember to give the thumbs up.

@scottfoggin6273 Жыл бұрын

Excellent help 👍

@RossPerryProductions Жыл бұрын

thanks for watching

@SuperHammerzeit 3 жыл бұрын

Very informative video. Because my brake pads are weared and my brake cylinder gets stuck in winter i have to lube inside of brake cylinder and then bleech it YACKS. I am bit scared that my rear brakes become too strong compared to front brakes and that i have to also lube my front brake cylinders.

@RossPerryProductions 3 жыл бұрын

No worries at all thanks for the comment, good luck with changing them.

@Lily_mae__2 4 жыл бұрын

Great video. Very informative. Just one question. Is there a specific size for the rewind tool? I have got to do my brakes soon so will be needing to buy the tool.

@RossPerryProductions 4 жыл бұрын

Hi there, thanks for your question, I would suggest if you are going to buy the tool get one of the many kits out there on the market. The kit I use has all the sizes I have ever needed. Unfortunately I cannot remember the exact one I used on the Astra, however it would have been one of the popular ones found in the kit. Sorry I cannot be of more help. Ross

@Lily_mae__2 4 жыл бұрын

@@RossPerryProductions not a problem iv found the kits quite cheap on ebay. Thank you for the reply.

@harrisonhunter7512 2 жыл бұрын

What sought of 14 mm socket was it called to take the bolts of the calipers off, in mine it like a hex type shape cheers from Brisbane

@RossPerryProductions 2 жыл бұрын

Hi Harrison, yes I believe just a standard Hex bolt.

@harrisonhunter7512 2 жыл бұрын

@@RossPerryProductions thanks for that

@TechnologyHive 5 жыл бұрын

Do you have to bleed the break system when just changing the pads same exact car?

@RossPerryProductions 5 жыл бұрын

Hi there, no not at all if you are happy with how they perform and know the fluid is good then you can just replace the pads. I tend to do it anyway whilst I have the wheel off, I always check everything else is good under there too.

@TechnologyHive 5 жыл бұрын

@@RossPerryProductions Thanks for response. Great to know. I'm changing the pads tomorrow so I found this video to be on point with what I was looking for. Thanks for sharing!

@RossPerryProductions 5 жыл бұрын

No worries at all thanks for checking it out. Please give the thumbs up :)

@TechnologyHive 5 жыл бұрын

@@RossPerryProductions Replaced the pads (rear disk brakes) but the main pistons were a pain in the arse to push back even with a tool made to do just that. This was on both sides btw. Now I noticed that my parking brake does not work at all. I adjusted it to 7 clicks, and still the car rolls even in neutral. Before I changed the pads, parking brake was already hardly holding. Now it just wont hold at all. I am wondering what your advice would be to check first. If it is the parking brake cable that needs replacing, how would I go about trouble shooting it? Or if you think it may be the main pistons gone bad, does that also affect the handbrake? Thanks Ross!

@RossPerryProductions 5 жыл бұрын

I'm glad you was able to do it, yes they can be a pain when they haven't been done in a while.

@johnfrench7947 5 жыл бұрын

Nice Ross am a mchanic but been retired now for a while but been doing the brakes on a 2006 Astra SXI 1.6 and beleave me this vehicle dose a lot of mileage and she dose not understand about regular maintenace rear pads were none existant but I forgot your needed a rewind tool on the piston so got one only problem was don't know why but the rear offside wheel refused to come off after we removed all the wheel nuts had to beat the shit out of it with the mallet tryed not to damage the alloy but had to beat it off with a lump hammer in the end never had a uni puller available at the time but you know a women they want everything doing yesterday anyhow it was that bad one of the pads had disintigrated completely caliper against disc so you can imagine the state of the disc anyway told her you need new discs and pads she said just fit the pads I'll get new discs later I arned her pads will not give you brake force on the discs they need replacing before you do any more long distance runs. So anyways next week she told me I have the discs will you fit them I Said yes so long as you have got another set of pads to fit with them. Anyway job done but trying to explain machanics to a woman DON'T TRY! :-D

@RossPerryProductions 5 жыл бұрын

Haha, brilliant thanks for sharing and good work!! I know the feeling I often have friends and family say to me, just do enough to keep it running......... as I always say you can stick a plaster on it but the wound will still be there. Thanks for watching Please give the thumbs up :) Ross

@johnfrench7947 5 жыл бұрын

@@RossPerryProductions This is what I seen when removing the rear wheels

@johnfrench7947 5 жыл бұрын

Sorry Ross it will not let me post the image don't know why

@sarah-jayneallan5012 4 жыл бұрын

i always used a g-clamp with my 2012 fiesta when pushing in the brake piston. where do i buy that special tool from?

@RossPerryProductions 4 жыл бұрын

Hi there G-clamps are always fine for the front but a lot of cars need the tool to turn back the rear piston due to the hand brake mechanism, you can get the kits pretty cheap from ebay :). I hope this helps. Regards Ross

@jannkomo2953 4 жыл бұрын

Hello guys, where can I buy brake piston adjuster for an opel astra h 2.0ltr ( tool kit)

@RossPerryProductions 4 жыл бұрын

Have you checked out ebay? There are plenty of universal kits on there.

@The_English_Miner 11 ай бұрын

Are both sides, Clockwise, to wind pistons back in?!!? Did the drivers side rear, just fine... Turning clockwise.. But passenger side piston being a pain... Turning but not going in.... Just want to make sure, passenger side goes clockwise too?!!

@RossPerryProductions 10 ай бұрын

Hi there, It has been a long time since I have worked on one of these but from memory they were the same on both sides. Did you manage to fix it? Ross

@The_English_Miner 10 ай бұрын

@@RossPerryProductions yeah i sorted it in the end.. Calliper was siezed.... But yep.. Both clockwise...

@RossPerryProductions 10 ай бұрын

I thought so, I am glad you sorted it. @@The_English_Miner

@sulaimana4116 4 жыл бұрын

Is 2008 and the 2007 is same thing?

@RossPerryProductions 4 жыл бұрын

Hi there Sulaman, I believe this model was current between 2004 and 2009. Ross

@grahamwaddington1658 4 жыл бұрын

A wheel laying under the car is no substitute for axle stands. And no torque wrench in sight. Otherwise, the vid was useful, thank you

@RossPerryProductions 4 жыл бұрын

Hi Graham, I make the videos so that anyone with a basic tool box (including those that come with the car) can undertake the job. If I made them with a trolley jack, jack stands, and a torque wrench (which obviously I have) people would have to go out and spend more than a mechanic to do the job. Thanks for your comment.

@jimmybobbikins 10 ай бұрын

Crikey mate, a scissor jack is an emergency only lifter, you should never work under a car that's held up by just that flimsy little thing, it's footprint is just not big enough to be reliable enough that a little too much heft off centre is going to have it over. I believe the most basic tools anyone doing their own work should be considering is a trolley jack or stands, minimum.