How to Replace Rear Brake Shoes in Toyota Yaris

Рет қаралды 318,431

7 жыл бұрын

How to Replace Rear Brake Shoes in Toyota Yaris
In this video I show How to Change Rear Brake Shoes in Toyota Yaris
#toyota #toyotayaris #yaris
Deals and Gears: www.amazon.com/shop/hummansunson
As an Amazon Associate I earn from qualifying purchases
Disclaimer: NewRoad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician.

Пікірлер: 102

@NewRoad 6 жыл бұрын

Visit our Store: www.amazon.com/shop/hummansunson

@honkymonkey9568 3 жыл бұрын

TIP: If you're like me, the shoes kept shifting out of place while trying to reattach the springs, so I held them in place by using a screwdriver to stuff a clean rag snuggly between the shoes and along the inner rim. It worked great.

@henrysteele9840 7 жыл бұрын

Those wondering what sort of bolts to use, M8x1.25 bolts of any length. Really should have been in the video.

@NewRoad 7 жыл бұрын

I really appreciate when people are adding additional info - Thank you. Unfortunately I am not able to think about all the details when making video. Thanks again.

@henrysteele9840 7 жыл бұрын

Humman Off-Road Adventures You can add annotations to note things you miss. Like a pop up that says "note: M8x1.25 bolts" when you mention using bolts in the video.

@1223superman 7 жыл бұрын

Henry Steele IV yeah there M8 x1.25

@jeffscomp 6 жыл бұрын

same size as what you need for a honda civic brake drum.

@dominicfong6341 3 жыл бұрын

I have heard it from The Car Care Nut Channel on KZfaq: the bolt can be found on the catalytic converter heat shield.

@colinkennedy908 Жыл бұрын

Excellant. This system causes me great grief at times. Looks simple enough but can frustrate a busy mind! Thanks.

@anonymousmc7727 5 ай бұрын

Tru dat😂

@googleplusisdead 6 жыл бұрын

Old, I know but wanted to thank you for showing the, in my way old drum brake experiences, stepped notches for the adjuster part and how they face. I used another video to do my Gen II 2005 Prius rear drum (not disc) brakes and it didn't show that. It never occurred to me that there might be a notch and that it would be important to face it the right way. Fortunately, I'm experienced enough to leave the other side intact so I can check odd things like this and got it right. RichE

@NewRoad 6 жыл бұрын

Thank you. BTW, a very good tip to refer to other side ...

@lateworm4132 11 ай бұрын

That tip to loosen a stuck drum with a bolt in that hole was what I needed. M8 worked. Thanks.

@NewRoad 11 ай бұрын

Glad it helped

@magnusanemo103 7 жыл бұрын

Thank you for sharing your knowledge!

@NewRoad 7 жыл бұрын

I'm happy this video helps. All the best

@tanmansu 7 жыл бұрын

Thank you for taking the time to upload this very useful video . kind regards from England and a very happy 2017 .

@NewRoad 7 жыл бұрын

You are very welcome and Thanks for leaving comments. Happy 2017 to you as well!

@peterhilbert6428 9 ай бұрын

Great video. I reviewed many videos b4 using this one. It worked very well. The only initial problem was installing the main spring. Looking closer l observed my mistake. I needed to ensure the shoes were fitted tight into the jaws of the brake cylinder. When l did this l had no problem installing the spring.

@NewRoad 9 ай бұрын

Awesome, glad my video helped!

@ivokraaier9740 4 жыл бұрын

4:35 no, when installing new brake shoes, especially when replacing very worn ones, the former setting of the adjuster will not match with a new set of shoes, it will have to be (fully) turned in otherwise the drum will not fit.

@NewRoad 4 жыл бұрын

Yes, you need to adjust

@DK-tm2kt 4 жыл бұрын

Pretty sound of Stephen hawking to turn up for the voice over

@Mudders 7 ай бұрын

Excellent video!

@robertdickerson16 5 жыл бұрын

Whoever made this ,I applaud u,I've done this a few times and it ain't easy

@NewRoad 5 жыл бұрын

Thanks man, it is not easy - I know :-)

@robertdickerson16 5 жыл бұрын

@@NewRoad you've just earned a new subscriber,thanks

@NewRoad 5 жыл бұрын

@@robertdickerson16 Thank you and welcome to my channel!

@NewRoad 5 жыл бұрын

@Lone Wolf Don't think people would watch me strangling with spring for 10 minutes :-)... the purpose of this video was to show people that they can do it and how it is done.

@pedromartinez865 2 жыл бұрын

Nice 👍🏼 thank you

@perrydoran 6 жыл бұрын

Hey your video was very helpful when I replaced the brakes on my 2014. Only problem is I hoped my handbrake would grab better after replacement but it’s still not biting like when it was new. If I’m on a hill facing downward and put the car in drive it lurches forward. Can you offer some advice on what I can adjust to bring it back to new when it would be locked up right in about 5-6 clicks.

@hopestrategy6169 2 ай бұрын

did you adjust your star wheel?

@malmaui5599 3 жыл бұрын

How did you remove the safety brake pin to place on the new shoe?

@davidvalens3337 6 жыл бұрын

What size thread are the bolt to take off the drum

@Isah305 3 жыл бұрын

Hello, Can you tell me what is the position of holder for hood holder when hood is down?

@Helojet1999 2 жыл бұрын

Thank you

@tamjidi 5 ай бұрын

Very clear instructions, thank you

@NewRoad 5 ай бұрын

Glad it was helpful!

@VTwin4Christ Ай бұрын

Top spring is a major pain

@dadangsupra1438 4 жыл бұрын

very helpfull for me...thank you

@NewRoad 4 жыл бұрын

Glad to help!

@mikan4216 2 жыл бұрын

I was wondering my yaris wheel.hub bearing nuts are at rear

@ed2345 4 жыл бұрын

I need a new drum - what is better.. a snare or a bass drum?

@jacobbabu607 Жыл бұрын

Excellent u r a simple pro🔥

@NewRoad Жыл бұрын

Thanks ✌️

@clintbalzan8926 5 жыл бұрын

Great video but The wheel cylinder should be checked for leaks before installing new shoes

@NewRoad 5 жыл бұрын

Agree, by default you should be checking all components while you at it :-)

@jamesdaugherty7138 4 жыл бұрын

@@NewRoad When I was a professional mechanic, we ALWAYS rebuilt or replaced the cylinders, whether leaking or not. It's cheap insurance.

@mananindanan9995 7 жыл бұрын

good

@paididoy 7 жыл бұрын

Did you buy the brake shoes with the arm (that hold the brake cable) already riveted to the brake shoe? I can't replace the brake shoe on my 2010 toyota yaris because I don't know how to separate the arm (that hold the cable) from brake shoe because it is RIVETED. If it is riveted how do you remove the rivet awy from the shoe? Can I buy a brake shoes with the arm already attached?

@NewRoad 7 жыл бұрын

I did. Don't you have C-whasher on yours?

@Drawingtillthecasketdrops Жыл бұрын

Same , I have ordered a total of six new brakes and even the ones that have the brake riveted to the shoe do not come with the piece .

@velezdeleonj1697 4 жыл бұрын

Good job Clear, not to much talk Gracias

@NewRoad 4 жыл бұрын

Thank you

@davehowley6000 4 жыл бұрын

What about clips out of back

@MtZionMediaPro 3 жыл бұрын

Where does one get the brake pads with the silver metal tab on it? Or how to you replace it?

@NewRoad 3 жыл бұрын

I got mine from rockauto.com

@applecider3489 5 жыл бұрын

One side gets pushes the other side of the wheel cylinder and damages it I always have problems with brake shoes any tips how to put brake spring back together without pulling 1 side so much?

@NewRoad 5 жыл бұрын

Try to block the other side with something ... (screwdriver?)

@howardmanley3388 5 жыл бұрын

Do all Yaris have brake shoes on rear wheel or depends on what yr Toyota u have?

@NewRoad 5 жыл бұрын

I think all of them have brake shoes at rear

@Drpepper7916 6 жыл бұрын

I bought some brake lubricant 02:48, but now my brakes are worse than they were before, any thoughts?

@NewRoad 6 жыл бұрын

When you say 'worse' - what do you mean?

@Drpepper7916 6 жыл бұрын

worse can only be described as having a near miss when coming up to a busy junction and the car wouldn't stop like it used to, now I'm afraid to use it.

@NewRoad 6 жыл бұрын

Did you touch brake line or cylinder? If you did - you have to make sure you bleed brake fluid to ensure there is no air in brake line. Make sure everything is installed properly. If you still have problem and cannot figure out - don't drive and take to to mechanic.

@googleplusisdead 6 жыл бұрын

I'd guess you used too much and it got on the brake drum, shoe friction material or both. This will give you NO brakes. But they won't squeal... :) You only need a VERY thin film where the brakes rest on the backing plate. You'll have to redo your brakes, with NEW shoes as ones that are contaminated with oil or grease cannot be cleaned up properly. Be sure to use brake cleaner spray or whatever to ensure NO grease is left on the drum, as well as the backing plate. Then put that VERY thin brake grease on the pads. Less is better. Good luck. RichE

@dominicfong6341 3 жыл бұрын

It is strange that Toyota puts such a humonguous brake drum on its Yaris; but Honda can get by with a tiny little drum on their Fit/Jazz.

@albertovigo3046 7 жыл бұрын

my hand break is loose and hora all the way to the top, I expected to need an adjustment but the hand break is not holding the car. what could it be?

@NewRoad 7 жыл бұрын

Check if line is not broken somewhere or properly attached to shoe.

@googleplusisdead 6 жыл бұрын

Bad self adjusters. Also could mean your rear brakes are essentially gone. RichE

@SuburbanBBQ 5 жыл бұрын

I hate that synthesized voice

@NewRoad 5 жыл бұрын

Artificial Intelligence :-)

@rhuaustin9004 3 жыл бұрын

You didnt say how to adjust adjuster wile installation.you dont say anyting about how to adjust..can you help me..

@rusty358 6 жыл бұрын

I always bleed the brakes once the drum is on. Many times air in the cylinder causes squeeks.

@NewRoad 6 жыл бұрын

Agreed! I think I have video about the bleeding - which I did after changing brake shoes and cylinder... i did have to replace one of them

@volt8684 Жыл бұрын

That bottom spring nearly killed me puttin back in

@NewRoad Жыл бұрын

I know what you mean 😁

@roberthall7206 6 ай бұрын

I’m dealing with that MF right now.. got me acting like Jim Carey in Liar Liar when he’s telling the pen” write it or I’m gonna break it off!!” Thing is whooping my ass. If you have someone with you it’d be so simple but I only have 2 hands.

@roberthall7206 6 ай бұрын