Thank you for the video. I watched another video and he left the parking brake on and the rear wheel bearings still came loose and out no problem. I will try that and combine your tutorial. Thanks again!

Great video, I just did mine on a 2018 Sport AWD. The 4 bolts were a pain, found it best to get under the car so I could see them and use the correct extensions to get at them. No need to take the breaks apart, wasn't necessary. Clamped a monkey wrench to the hub and pushed down to get it off, was seized into the plate too, just needed to be hammered out. Last, just use the axle nut to hold the bearing and backing plate into place, then you can easily screw in the 4 bolts into the new hub.

Hahaa love this Guy. You can cuss when you do this but I can’t. If we shall belive you on that one. Thanks for the Video it helped me a lot on my 2017 Rogue.🍷🍻

Well done mate! You get 10 out of 10 for effort and perseverance.

This was a very helpful video. I did a lot more swearing than what was done in your video but it all came together and works. Thank you.

Thank you, really appreciate all the details. 👍🏻👍🏻👍🏻

Thanks for the great video. Too often we lack details on stuff like the emergency brake clips. Great explanations. Found this extremely informative and will change rear bearings on my daughter's Rogue.

I do understand why you did take off the emergency, allowing you some space to bang it out in case it were really stuck in the knuckle. however it wasn’t that much seized inside, thankfully allowing you to take it out with no problem. Great job !

When you do the springs for the brakes (if you decide to take them off), you can bend a small bar into a hook and bend the other end into a handle, use an old spring to pull with or use a piece of 3/16 rope to pull with. It will make it a lot easier, I usually use the rope now and once over the pin just pull the rope out.

Very helpful if you have skills about self changing rear coz it’s too expensive here to go in car shop

Galing nman ni jeff may natutunan na ako salamat sa pagshared

Ang galing alam na alam nya.. doesn’t need car shop to fix..

Thanks bro. It was a very helpfull video

❤thanks for your time and great Camara work❤

Nice Lyn no need na magpa repair og car ninyo 👍

Thanks for your asisten.

Wow, I wish I could have watched this video before I replaced the rear wheel bearing on my 2017 Nissan Rogue!

Ya guy those 4 bolts in thru the back are hard to get off

Thanks for a great, informative video on these wheel bearings! If it's true that the emergency brake drum assembly can be left on, then this really isn't that big of a job.

was it nessasary to remove the emergency break assembly? Great step by step instruction. I did one one a Kia Sedona but it wasnt AWD.

Thanks

Good job friend 😊😊

Um you DO NOT USE AN IMPACT to tighten axle nut... there is a torque spec to prevent you from crushing the hub this is extremely important!!

Thank you

How many miles were you at when you performed this repair?

No need to disassemble the parking brake. The hub comes out with it still assembled

You don’t have to take off the emergency brake to remove the wheel bearing. Will save you so much time

excelent video my friend,✓✓✓ whats is the oem parts number about this item?!

tipid sis...hndi na magbayad ng mekaniko..wheel bearing.

Just a fyi. Cv joints will never sound like a wheel bearing. They make a click click click sound. Bearings sound like choppy tires. Otherwise all good

I did mine yesterday. . . The shaft came out merely pushing on it. . yes the 4 holding bolts are a nightmare to remove. . Now I am stock because the Hub/ bearing assembly I got from the online company, , , The box had the right number but what was in the plastic seal bag was the wrong ? ? ? imagine, yu buy a part, receive the right box and in that good box, there is an intirely different . . 3\4 of an hour with the part guy who could not find the envoice number I gave him ? ? ? He was focussed in the idea I made a mistake, buying the wrong part ! ! ! !I told him at least 6 times that I ordered the right part, I receive the right box but in this box, there was a wrong part ! ! ! Then came with a new guy, start all the process over again We will get back to you tomorrow. . . This morning, a new guy and we start all the process another time 🤨 The 30mm bolt is torqued at 180 ft / pound. . . . The 4 bearing/hub assembly; what torque does it need ?

What size impact socket did you use to remove the castle

Would i be able to push the axle out of the hole where the wheel bearing should be? After taking the wheel bearing out of course... Im trying to change the rear axles on my 16 rogues and I haven't seen a video of someone actually doing it.

How long did this actually take?

Should never let the brake caliper hang by the hose

Grate video, thanks for sharing. I need to replace mine also.where is the best place to get the part and I am afraid to order wrong part.

Was there a abs Sensor that needs to be hooked up right now

nice and loved you ....you loved me

I just replaced the passenger rear wheel bearing on my daughter's Rogue. I can attest that those brake clips are a bitch! You can't fit your fingers behind the backing plate, so you have to use a screwdriver to apply pressure from the back.

6❤️❤️❤️❤️❤️❤️ Like ❤️ Nice ❤️ ❤️❤️❤️❤️❤️❤️❤️❤️

Was it necessary to remove the drum brakes?

How many miles were on it?

too bad you dont have video to look back to, so you can remember how and where the springs and spacer go....

Is this awd rogue or 2wd?

What size is the axle nut??

you KNOW your taking the caliper off, WHY wouldnt you be prepared to replace the pads.... it ONLY makes sence, parts can always be returned if not needed, NOW your doing the work TWICE?!?1 SMH