Excellent video. I definitely needed two people to get that belt on. Little trick. One person hold the belt on the roller, the other shimmy on the belt.

Thanks for the great video! Just finished replacing my belt, idler pulley & rollers with the same kit you had, and it works perfect now. Getting those rear rollers off was a bit of a pain, and I had an extra set of hands for the belt/drum replacement...that must have been an exercise in patience by yourself. Thanks again!

I just changed my belt today following step by step what you did. Thank you very much for the video! You save me hundreds of dollars.

Thanks for the outstanding video. My son’s dryer wouldn’t start and found the belt was broken. We found your video and replaced those kit parts. Took us 2 hours plus an hour to run to Home Depot to p/u a new vent hose. It runs like new again thanks to you 😊. Also thanks for mentioning the 17mm wrench. I bought one before my son and I started the repair. For just the appliance repair company to come out and give an estimate was $120.00 dollars which we didn’t entertain. 4:16 foot

Thanks just changed my belt. Your instructions were right on the money. The belt and drum was a little aggravating. Two people makes it much easier.

Thank you so much! I've never taken a dryer apart but was able to successfully change the belt.

Very helpful step by step guide with great video support. There is a way to set the belt by one person, a little hard but possible if you put the belt on the drum first and instead of fixing the drum with front panel put something in between the bottom of the drum and the top of the motor box, just to make the drum stay as much as possible in its working position. This way you may be able to use both hands to set belt on the motor shaft and pull up the roller high enough to get the belt under it. The video is great anyway, very helpful, thank you!

Well i was going to either pay for service or attempt this myself but now nope! Just going to get a new unit. This was helpful, thanks. Not going through all this on a 10 year old dryer to have the heater fail a few years later and do all the tear down again.

Thank you. My sprung came off the pulley. Because you showed so much of the process I was able to diagnose. It did not take my 15 minutes. More like 1 hr because I had to take it apart twice

Thank you so much! Saved me so much money!

Thanks man! It was helpful.

Thanks man. Replacing those today

thanks for the video,,, just helped me fix my dryer today

Great and helpful content brother thank you very much

Great video

Thank you!

One year later how is everything working? There are a number of bad reviews about the wheels coming apart on Amazon.

My girlfriends dryer makes noise and dont spin, spin cycle timer works and count down, any idea? Its a samsung dve52m8650v/a3

Those white plastic triangle clips on my non-Samsung dryer kept the rollers on the axels. You shouldn't have to remove the axel to remove the rollers. I am fixing a neighbor's dryer tomorrow and will know for sure if the axels need removed to change rollers.

Any idea why the idler pulley screw just keeps spinning and not come out?

Thank you so much!!! You made this repair super easy!! You are the man sir!!

a little miffed you skipped the part on how you disconnected that door closed switch 😅 that thing was annoying! other than that this video was a great walkthrough 👍 I only needed to replace belt and managed to get it into place just loosening the front and snaking it around the drum without having to remove drum.

Before doing anything , even opening the top. Please please disconnect dryer from wall power

I never heard mention of shutting power off to the appliance. Shut the appropriate breaker switch at the panel, try to start the dryer and if no lights on the panel, pull the cord from the outlet.

12:20 😂😂😂😂😂 nooope!