How to Replace Starter Toyota Corolla 2009-2013 in 15 Minutes!

Рет қаралды 65,520

2 жыл бұрын

Here's a simple walkthrough showing how to replace your starter. Thankfully this is a simple job that anyone can accomplish with simple hand tools. Here's the starter I purchased for my 2010 Corolla S. Hopefully this helps you out.
Link to starter: www.ebay.com/itm/115160955396

Пікірлер: 59

@DuvalDashCams 2 жыл бұрын

Wouldn't by removing the ground as soon as you touch something metal the wrench act as a ground since your engine is grounded out and the body is grounded out and everything else is grounded out as soon as you touch your wrench from a positive to the body it grounds........ remove the positive side

@ShareXP 2 жыл бұрын

Yes you are correct! Remove the power (battery) starting with the negative (black) terminal, and positive (red) second. The reverse is true for hooking it back up, positive (red) first and negative (black) second . I'll pin this since I listed it incorrectly in my video, thank you.

@DuvalDashCams 2 жыл бұрын

@@ShareXP well thank you! Glad I could be of assistance! Thanks for the video. Been working on cars since I was a kid, started with my grandpa.. and the KZfaq algorithm brought me back to the basics today and I realized I couldn't remember which one to remove first haha

@1717ShapelessMercy Жыл бұрын

@@DuvalDashCamsI worked on my cars too I always remove negative and it helps no issues so far.

@ClansmanK 9 ай бұрын

Wrong. To complete any circuit the ground would have to be connected to the battery.

@ShareXP 9 ай бұрын

@briankincade Ah, so I am right in just removing one terminal?

@daeskimofo Жыл бұрын

Doing my gfs starter in the next 20 min. watched this video 4 times before this project and I’m confident with your instructions brother! Wish me luck lol

@ShareXP Жыл бұрын

You got it.

@daeskimofo Жыл бұрын

Yeah it took me 2 hours 😂 the top bolt really pissed me off tbh. I had to go in at so many different angles

@dontworry7113 Жыл бұрын

@@daeskimofolol 15min turns into a 2 hour job happen to me with my other car 30 min job turned into 4 hours

@daeskimofo 8 ай бұрын

it happens lol i was so fucking done with that replacement@@dontworry7113

@Dale-uh9he 2 жыл бұрын

Thank you for your video. It allowed two old farts (77 and 80 years old) to change a starter. The key was the ratcheting wrench. Great advice!!

@ShareXP 2 жыл бұрын

Glad it helped!

@korn6668 3 ай бұрын

Im 34 and i consider myself an old fart

@pfrancis7483 Жыл бұрын

That does look simpler said than done, but I like that as a novice to starters, I can see what I'm looking at, due to your video. Thanks.

@ShareXP Жыл бұрын

You bet!

@bossmansito778 10 ай бұрын

Thank you so much changed mine and ive never done this before great video

@RedstoneQwerty Жыл бұрын

If you don't have a ratcheting wrench but are willing to do a little more work, you can take out the transmission dipstick tube (two 12 mm bolts in two brackets) and fit a regular ratchet in to get the top bolt. Also allows you to torque it to spec once you're done if you're super specific like me ;) Great video!

@ShareXP Жыл бұрын

Thank you for the extra tips.

@codeddxv23 9 ай бұрын

I have a manual so there's no sick for me! I was very happy about this! Lol

@dianazamora2308 Жыл бұрын

Excelente vídeo, thank you!

@jameswhite1319 Жыл бұрын

Thanks for sharing!

@felixlaboy1453 2 жыл бұрын

Great video buddy. Thank you

@ShareXP 2 жыл бұрын

Glad it helped!

@timklein3962 7 ай бұрын

Great video; thanks for posting !!!

@ShareXP 7 ай бұрын

Glad it helped!

@rsalas921 8 ай бұрын

If I over tighten the brass with the nut. It will break right? Looking at other videos. I feel like I over tighten it but I should b good if it didn’t break off right??

@bricenojh 6 ай бұрын

thanks bro for your video

@gudyhernandez635 2 жыл бұрын

Gracias amigo, el video esta muy bien explicado, yo se que hablo otro idioma, pero yo use el traductor del teléfono para comprender lo que tu decías en el video, me gustaría hacer una pregunta y me dieras una breve explicación sobre un motor 22R 86, me gustaría reparlo

@ryannguyen0 9 ай бұрын

What year is your car? My car is a 2009 corolla. I’m wondering if it’s a three terminal starter solenoid or one starter terminal?

@CaRlOSRoShI 3 күн бұрын

Thanks

@yu4ia Жыл бұрын

Awesome

@painkillerO8 5 ай бұрын

I just did and I am facing issue. The engine starts without the key turning all the way

@arceliosantos2135 Жыл бұрын

Good tisher

@mamaler0y 10 ай бұрын

I think that the starter is in a completely different place on a standard transmission. Nothing looks familiar.

@ClansmanK 9 ай бұрын

Would have nice to know what engine upfront.

@oatlord Жыл бұрын

15 minutes my ass. Took me hours trying to get my hands in to get that top bolt. The jerk. But i still have a grinding noise on the first start after its sat for a bit. I've seen people say it's vvti related? Is it something to worry about?

@ShareXP Жыл бұрын

Hah, well I haven't had anyone else mention it yet. Might have to upload a video and get some feedback.

@Karin-ec4co 2 жыл бұрын

splendid 🙂✌️️️!!! Do not waste your time = Promo'SM!!!

@ShareXP 2 жыл бұрын

Hah, thank you!

@blessb3565 Жыл бұрын

You should have totally started the vhehicle.

@ShareXP Жыл бұрын

I did, it's just a quiet car. 👍

@blessb3565 Жыл бұрын

@@ShareXP hey so i can remove the starter from the top of a 2013 corolla le i looked and it looks like i can only remove it from the bottom

@lauramiller1065 Жыл бұрын

Ant no damn 12mm mane

@ShareXP Жыл бұрын

Well shoot, what is it brother?

@RedstoneQwerty Жыл бұрын

The OEM starter has a 12mm nut on the positive terminal, some aftermarket starters (I got a Duralast reman from AutoZone) have 13 mm nuts on the positive terminal.

@ShareXP Жыл бұрын

Thanks for the clarification!

@WilyTuber Жыл бұрын

Yeah well it would HELP if you actually replaced it!

@kiwicory100 2 жыл бұрын

yeah well 15 bloody minutes if you can get the bottom bolt undone....NOT

@ShareXP 2 жыл бұрын

The ratcheting wrench didn't break it loose for you?

@chiefyodatz9595 2 жыл бұрын

WD-40 buddy

@kiwicory100 2 жыл бұрын

@@ShareXP no for me just hard to get to. Looked at. Another video suggested pulling radiator fan, 2 10mm bolts Had I gone that route first yep could’ve whipped through it. I realize amongst the mechanic Illuminati there’s a competitive “let’s see who can get the job done with the least amount of extras removed crowd”. Home handyman doesn’t need to prove that so much.

@ShareXP 2 жыл бұрын

That's fair, yeah I buy a lot of single use tools to get stuff out in one swoop. Thankfully this part is pretty accessible.

@squaremovement 2 ай бұрын

i don’t enjoy a can of worms with extra parts in the equation. thanks for the straight forward video and explanation