How to replace the Battery in Braun Hair Clipper HC5010, HC5030, HC5050, HC 5090

Рет қаралды 32,295

Жыл бұрын

How to replace the Battery in Braun Hair Clipper. Braun Hair Clipper HC5010 battery replacement. Replace the Battery in Braun Hair Clipper HC5050. Replace the Battery in Braun Hair Clipper HC5090. Braun Hair Clipper HC5030 battery replacement. How to replace the Battery in Braun Hair Clipper HC5090. Braun Hair Clipper HC5050 battery replacement. How to replace the Battery in Braun Hair Clipper HC5010. Braun Hair Clipper disassembly. How to disassemble Braun Hair Clipper. Braun Hair Clipper HC5090 battery replacement. Braun Hair Clipper repair. Braun Hair Clipper lubrication. Braun Hair Clipper cleaning. Braun Hair Clipper. AAA batteries Braun hair clipper. Batteries for Braun hair clipper. NIMH battery Braun hair clipper. Braun hair clipper hc5030 battery replacement. How to disassemble Braun HC5030 hair clipper. How to disassemble Braun HC5010 hair clipper. How to disassemble Braun HC5090 hair clipper. Braun series 3 hair clipper battery replacement. Braun series 5 hair clipper battery replacement. Restoration of Braun hair clipper. Is it possible to replace battery in Braun hair clipper?
Monetize your Clicks and Downloads: publisher.linkvertise.com/ac/... • LINKVERTISE One of the...
Please Support Me on PATREON: / 2013electronicscomputers
Affiliate links:
Braun HC5010 Hair Clipper: amzn.to/3F3er1A
Braun HC5350: Hair Clipper: amzn.to/3u87WHD
Braun HC7390 Hair Clipper: amzn.to/3Oirdgg
Braun All-in-One Series 5 5471: amzn.to/3MAtRNu
Braun oil: amzn.to/3C6C2wR
T7 torx screwdriver: amzn.to/3TroEt4
Batteries with tabs:
amzn.to/3Sni6dA
alii.pub/6vnd6y
Eneloop AAA NIMH batteries: amzn.to/3z040ry
Micro Cutter: alii.pub/6huj51
Pliers:
amzn.to/3TmygVX
amzn.to/3eO2PVk
alii.pub/6huj5t
iFixit Tools: amzn.to/3P2OnEX
Soldering/Repair Mat:
amzn.to/3q07HIZ
alii.pub/6g41jp
Soldering kit:
amzn.to/3UghgUp
alii.pub/6vndlc
Soldering Iron: alii.pub/6wt7fo
Soldering Iron Stand: alii.pub/6vnifd
Amtech FLux: amzn.to/3QWMEFG
Rosin Flux: alii.pub/6wt434
Solder: alii.pub/6xt10g
Solder Wick:
amzn.to/3RIDT2O
ali.pub/53b163

Пікірлер: 54

@KeremcanBuyuktaskin Жыл бұрын

My Braun HC5090 stopped working completely. Even when it was plugged in, it was only flashing red light. I thought even if the batteries are dead it should work when plugged in, so I thought it was probably defective and was about to send it to the service. Then I found your video and decided to give a try, and voila, after replacing the batteries it is as good as new! This was my first time soldering and I was a bit stressed, but it was all good at the end. Thank you so much man, you're a lifesaver!

@ElectronicsComputers Жыл бұрын

You're welcome!

@berndschleicher5907 Ай бұрын

Thank you very much. Because of your great video i was able to repair my Braun Hair Clipper. Now it works better than ever before. 🤩👍

@ElectronicsComputers Ай бұрын

Great job! I'm happy to help.

@stallion1906 Жыл бұрын

Hi, thanks a lot for sharing this video. I have had the HC5050 for about 5 years and the batteries were almost dead and wouldn't charge anymore. I tried to get it fixed at the Braun service center in Guangzhou (I live in China) and they asked for around $40 for it. In the meantime, I bought a Panasonic trimmer and I am very happy with it. After watching your video, I decided to try to fix my old Braun HC5050 so I ordered the batteries from Taobao and they cost me $2 and today, finally I decided to replace the batteries. Dismantling was not a problem, except that the top cover parts fell apart, and that was complicated to put back together. Taking the parts apart, removing the old batteries, and installing the new ones was easy, and putting everything back together went smoothly except for the parts of the top cover which took a while to figure out and reassemble. I actually tested if the clipper was working before reassembling it by connecting it to power and it was ok. So, all in all, it was a good experience and I am very happy that I was able to fix my clipper by myself thanks to your video, and in only cost me $2 as I had all the other tools needed. Just a warning for other people, try to be very careful when disassembling and removing the top cover as it's not easy to figure out how to put back all the parts together. Thanks again. Sam

@ElectronicsComputers Жыл бұрын

Great job! I'm happy to help and thank you for the comment!

@markkoh888 Жыл бұрын

Thank you for the video! Its save me plenty of my time figuring out the puzzle!

@ElectronicsComputers Жыл бұрын

I'm happy to help!

@lewisray2697 2 ай бұрын

Thanks, very helpful, I think I’ll have to replace the batteries in a few months.😅

@ElectronicsComputers 2 ай бұрын

I'm happy to help!

@FevonTV Жыл бұрын

Thanks a lot. My hair clipper just stopped working. Whole motor were in rust. I cleaned it off and lubed and it started working. Battery is still fine after 6 years.

@ElectronicsComputers Жыл бұрын

Great job! That clipper will last decades with proper maintenance.

@hrxkrx Жыл бұрын

@@ElectronicsComputers My clipper Series 3 - 3050 still works after approx 12 years. Being using it every 15-20 days. Great and reliable device. Its time now to replace the batteries. They still works but with noticeable capacity loss. Thanks for this tutorial.

@ElectronicsComputers Жыл бұрын

@@hrxkrx Happy to help 😊

@helderreis3478 Жыл бұрын

Fantastic. Thank you so much.👏👏👏

@ElectronicsComputers Жыл бұрын

Welcome! Thank you for the comment!

@ChrisT-us9gq 5 ай бұрын

Many thanks, worked well! Just one note - make sure the leads/lugs for charging are not bend and slide well on the pins when re-assembling the PCB in the housing.

@ElectronicsComputers 5 ай бұрын

Great job! I'm happy to help.

@miroslawbanka666 Жыл бұрын

Please specify the power of the Braun HC5030 motor so that I can choose a different one for the shaver ?

@danielalin76 8 ай бұрын

Good job! Thank you

@ElectronicsComputers 8 ай бұрын

Thank you too!

@electroumit Жыл бұрын

Thanks. Good work.

@ElectronicsComputers Жыл бұрын

Thank you for the comment!

@Tthug_93 Жыл бұрын

Ca we just turn it without thr battery, use only the cable ?

@sylvesterstone6064 Жыл бұрын

Thanks a lot for this video!! I have a different model of the braun trimmer with two 750mah (NiMH) batteries... Do you think I can replace it with a slightly higher mAh batteries but keeping the voltage same?

@ElectronicsComputers Жыл бұрын

The battery capacity doesn't matter, you can use any available to you. But the voltage and the type (chemistry) of batteries are very important. If the device is designed for NiMH batteries you can't use Li-ion, NiZn etc.

@herrvonberg9010 Жыл бұрын

Thanks a lot! are bigger batteries than AAA are possible, will maybe AAs fit?

@ElectronicsComputers Жыл бұрын

There's not enough room to fit AA batteries.

@pawlon Жыл бұрын

I have a question: is it possible to completely remove batteries so clipper will work with charger plugged in all the time? Can kt be done by simly removing batteries and replacing them with wire?

@ElectronicsComputers Жыл бұрын

Yes, it will work!

@ganalaser7169 Жыл бұрын

Can you please explain how to restore default service settings in samsung smart tv.even i did reset all the menus it still remains the same (wifi ,Bluetooth , screen mirroring and automotion plus.not working after tweaking i didn't remembered those settings and i know iam dumb ) please help.

@ElectronicsComputers Жыл бұрын

Only by reflashing the chip.

@History_92 9 ай бұрын

HI, thanks a lot for video. i need electronics card for this where i can find it

@ElectronicsComputers 9 ай бұрын

Do you mean the PCB? What happened to it? It's easier to replace dead components on it than find a new one.

@k00bza Жыл бұрын

Next time use some TIN on soldering iron because IT will faster pass temperature (pushing hard soldering iron is not good idea)

@ElectronicsComputers Жыл бұрын

I just bought the cheapest soldering kit specifically for this video, so anybody could do it. I have several repair shops with all professional equipment and stuff. I make these videos just for regular folks with some basics skills.

@retaarded. Жыл бұрын

Hey man i just saw you video in which you broke your arm during arm wrestling i have the same thing happening with me now i would be grateful if you could tell me answer to these question 1.is your arm as strong as it was before it broke and can you still lift same weights again? 2. Do you still go to gym? 3.how much time did you took to get back to gym 4.did you removed the plates and screws after recovery 5.is there anything that to be worried about? Pls man your help would be much appreciated.

@ElectronicsComputers Жыл бұрын

Just watch the second part of my story and there will be all answers. The link is at the end of that video or in the description.

@oliverburton672 5 ай бұрын

Nice video, but unfortunately on my Braun 5050 the batteries are glued in place. It isn’t possible to remove them just by melting the solder.

@ElectronicsComputers 5 ай бұрын

They use a double sided tape usually between batteries and PCB. Just apply some tension to the battery and desolder one side and it will pop up, then desolder the other side.

@liquicitizendirk2147 5 ай бұрын

@@ElectronicsComputers Jup, can confirm. I placed a spudger between the batteries, applied pressure while keeping my soldering iron on the tab till one side came loose.

@ElectronicsComputers 5 ай бұрын

@@liquicitizendirk2147 Great job!

@liquicitizendirk2147 5 ай бұрын

@@ElectronicsComputers Thanks for the short and concise video! Soldering the tabs to exisiting AAA Batteries was maybe not the best course of action since I exposed them to quite a lot of heat to get the solder to stick. But I guess I'll come back once those go bad and buy some with tabs (Or I have a reason to splurge on a spot welder lol).

@abuhair2413 Жыл бұрын

How many rpm for this machine

@ElectronicsComputers Жыл бұрын

Have no idea. But it does what has to very well.

@josefwalterschreier7305 8 ай бұрын

Warum gibt es keine deutsche Sprache bei den Untertitel

@ElectronicsComputers 8 ай бұрын

Subtititles are available on all languages. Click on the gear icon, select subtitles, then click autotranslate and select your preferred language. Untertitel sind in allen Sprachen verfügbar. Klicken Sie auf das Zahnradsymbol, wählen Sie Untertitel aus, klicken Sie dann auf 'Automatische Übersetzung' und wählen Sie Ihre bevorzugte Sprache aus.