How to replace the brake accumulator in your Pajero yourself and stop that chirping. NM NP

Рет қаралды 29,997

Күн бұрын

How to install a brake accumulator and stop that irritating chirping noise on Gen 3 Mitsubishi Pajero Montero
Brake accumulator part number 4630A011

Пікірлер: 65

@JADDownunder Жыл бұрын

This is the first how to video I’ve done on KZfaq. Let me know what you think and if there’s anything I’ve missed. All feedback welcome and thanks for watching.

@El-sm9gr Жыл бұрын

Thanks JAD for posting this, my mum's NP Pajero is experiencing the same chirping under light braking. Her mechanic in Kepera said it might be the clock spring but I noticed it only occurred under braking which doesn't appear to be affected in any way. Thanks again! I like the shades!

@JADDownunder Жыл бұрын

@@El-sm9gr Thats awesome. Hope my video helps. I researched a bunch of places online before doing this to make sure I wasn't throwing away my money and no regrets. Even checked with Mitsubishi for any potential recalls to no avail! The chirping has gone and hasn't come back.

@mmm-xh6ll 5 ай бұрын

hi. you could have let us hear the chirping noise. how can i tell if my hbb needs replacing?

@JADDownunder 3 ай бұрын

@mmm-xh6ll your right I didn't capture it very well. I put the chirp noise right back at the very beginning of the video. On hindsight I should have made it longer and louder and at the end done a before and after. The feedback helps me create better videos in future. Thanks 😊

@uaevoyager9561 4 ай бұрын

Have the same exact issue and the mechanic told me that I need to change the whole break system not only the acomulator which is extremely expensive. Seeking your advice if you faced any issues when replaced the accumulator only or it's working fine, please??

@JADDownunder 3 ай бұрын

It's worked fine ever since. 😊

@NewberryFarm Жыл бұрын

I watched your video a few times and just replaced my accumulator. It was super easy. I wish I had replaced it sooner. I did spring for a new torque wrench, though. 😂

@JADDownunder Жыл бұрын

Awesome Joel! Don’t worry, I put up with mine way to long and after scouring forums and KZfaq not finding much info decided to make the video as well. Really glad I made the video and it’s helped. Thanks for sharing/commenting 😎👍

@blooskyy7 6 ай бұрын

Thanks for sharing, this is the exact issue on my 2003 Pajero, looks like a super easy fix!

@JADDownunder 6 ай бұрын

Very cool. Thanks for letting me know as I created the video to help other with the same issue. 😎👍

@blooskyy7 6 ай бұрын

Just replaced mine following these steps and it worked perfectly! Interested to know how you disposed of the old accumulator, did you drill a hole to remove the nitrogen pressure?

@channawasantha4680 3 ай бұрын

Thank you I have same issue.

@JADDownunder 3 ай бұрын

No worries 👍

@nasserjabri7449 Жыл бұрын

Thanks for the video, you could use long bar , or apiece of pipe to untight or during tightening, you wouldn't require much force, it would much easier to work with the watch removed from your hand, prefable to use gloves when working with break fluid.

@JADDownunder Жыл бұрын

Thanks Nasser! I thought afterwards it would have helped. Hope you found the video useful. 😊

@sonicmiranda10 7 ай бұрын

Thank you very much for the vid.

@easyneos 8 ай бұрын

Non electric capacitor , loving it

@sandveldoff-campdrifters2174 5 ай бұрын

Good day, very informative video; My car is a 2004, Pajero 3.0v6 with 6g72 Engine. Please advice could worn out brake pads cause the buzzing issue when brake pedal is pressed? Because mine when I press the brake pedal 3 times with the engine off and ignition on I get the small buzz sound and an abs dash light! This is the exact sound it started doing a few days back, sometimes when u apply brakes to put on reverse it will make a continuous beeping sound then goes off after barely 5 seconds!

@JADDownunder 5 ай бұрын

I wouldn't know about this. Try the Mitsubishi Pajero forums. They are really good at helping to diagnose. Thats what I originally done myself when diagnosing this problem. Good luck.

@edenbul6140 2 ай бұрын

Hello, how to understand it must replace? did you feel soft when you press the break?

@ucheomajamesofong9747 5 ай бұрын

Please can you advise on who supplied you the Accumulator I have the same problem on my Pajero Shogun 2006 Diesel 3.2Ltr and I am looking for suppliers of the ABS AISIN components either the accumulator, Motor or the complete Unit

@JADDownunder 5 ай бұрын

Purchased on ebay from reputable seller. Its Original OEM. Wills Auto Parts. Not sponsored. Shop at your own review.

@conquerandwin 4 ай бұрын

Great vid. The instructions say to eed the front end of the braking system, though. No issues without bleeding ? Mine is leaking brake fluid so I might just try torquing it, or replace the O ring if necessary.

@JADDownunder 4 ай бұрын

I never bled mine but that's not a huge job either as long as the bleed nipples are in good condition. Would definitely look at replacing o ring though

@chadt1324 4 ай бұрын

Pumping the brakes the 40-50 times is considered bleeding the system. Crucial to have key off

@420toursjamaica5 Ай бұрын

Hey mate. We just changed the accumulator in our pajero, didn't work.. changed the pump too.. still can't bleed the brakes. Nothing going thru to the rear brakes. Help!!

@buster_1972 7 ай бұрын

I have the 3.2 diesel motor, and mine doesn't have the nut on top. How would I go getting it off? This chirping noise is annoying. Mine is silver in colour not black like yours? Thanks

@JADDownunder 7 ай бұрын

I haven’t done one of these but doing a quick check on trusted forum I see one bloke used oil filter removal tool. Give that a try 👍 www.pajeroforum.com.au/forum/vehicles/generation-3-pajero/1086990-five-minute-brake-accumulator-change

@kimbleyhone8811 2 ай бұрын

Our Pajero np 2002 is making a high pitch beeping and brakes have gone is that the brake accumulator

@TheBamba1 Жыл бұрын

What chirping noise are you referring to? Do you have a recording of the noise? It would be beneficial to "hear" what the faulty accumulator sounded like as you referred to it. Many thanks.

@JADDownunder Жыл бұрын

At the start of video. Was my first recoded KZfaq video in many years and looking back I didn’t capture it well. Try the start of the video again with volume up a bit. It was super annoying as it chirped all the time. Often much higher pitch that captured in video.

@JADDownunder Жыл бұрын

I don’t know if I’m allowed to share other’s videos but this bloke shows it chirping kzfaq.info/get/bejne/ebp8opSJ3t-3pqM.html

@user-ie5tm1ln2i 10 ай бұрын

Hi there, is it safe to change just this part if the system? given is an electric one, wouldn't affect the safety of the car?

@JADDownunder 10 ай бұрын

The part I changed isn’t electric but filled with gas and hasn’t given any problems since changing it out. For your own safety always do your own research and seek professional advice 😉

@efalang2228 9 ай бұрын

How about bleeding? Does accumulator have air upon installing?

@JADDownunder 9 ай бұрын

I didn’t need to bleed as when i lifted off and reinstalled it didn’t get any air in between the new accumulator and connection point. If you think you should bleed the brakes go for it. Thanks for watching!

@eusterioushabeenzu4250 11 ай бұрын

Hi, my accumulator doesn't make the chirping noise,but the pump keeps on running every few seconds.The brakes work just fine though they feel a bit spongy.It's a 2002 Pajero ,petrol.What could be the problem?

@JADDownunder 11 ай бұрын

Without physically being able to inspect I would suspect a weak pump. Try some Pajero forums or to be sure discuss with a good mechanic! Good luck!

@chadt1324 4 ай бұрын

Still the accumulator

@charlesk44 Жыл бұрын

What does an accumulator due

@JADDownunder Жыл бұрын

A brake accumulator is a component in a vehicle's braking system that stores hydraulic pressure. It helps provide quick and responsive braking performance by storing pressurized brake fluid. When you apply the brakes, the accumulator releases the stored pressure, allowing for immediate brake actuation. It improves braking responsiveness and can support the brake system during power loss or when the engine is off.

@Pay944 Жыл бұрын

Hola , dónde puedo comprarla . En españa no sé dónde ahí ,? Muchas gracias de antemano

@JADDownunder Жыл бұрын

Tienes ebay o cam compras en alguna parte elae online?

@zymvragoudakis Жыл бұрын

Mine doing the same,, the mechanic check it and he say it is not fail,,, it is dangerous to start not have brakes?

@JADDownunder Жыл бұрын

It would be dangerous to start (or more likely drive) without brakes. Since changing my accumulator it’s stopped the chirping and brakes feel good and stop the Pajero as expected.

@olamabambi4193 Жыл бұрын

How much did it cost. Do you still have the old accumulator?

@JADDownunder Жыл бұрын

Hi Olama Bambi. So the accumulator in the video cost $330 Australian dollars. I purchased from reputable Ebayer and it’s OEM. After I looked at what it took to refurbish, and searching for others who could refurbish I ended up disposing it. Wasn’t worth the extra effort to refurbish. The new one is still working 100% perfect. 👍

@anguscooper Жыл бұрын

What's the purpose of function of the accumulator

@JADDownunder Жыл бұрын

Hi Angus. It provides reserve oil for power-off controlled braking. So I’d the power or engine fails you’ve still got come brakes. The Pajero ones become weak, can’t hold pressure and start to chirp which gets super annoying. Cheers 👍

@redcorvetteguy Жыл бұрын

So you didn’t need to bleed the braking system? I need to change in my 2002 Pajero (qld Australia) do you stick to genuin parts or can you get them from repco?

@JADDownunder 10 ай бұрын

Sorry for late reply Ref Corvette Guy. I purchased mine online and was genuine part. Still works like a dream 👍

@abeljimenez3188 Жыл бұрын

Me gustaría ver el vídeo en español

@JADDownunder Жыл бұрын

No me di cuenta, pero tenía los subtítulos apagados. Ahora los he encendido. Intenta los subtítulos de las leyendas ahora. Gracias

@JADDownunder Жыл бұрын

Déjame saber si eso funciona?

@IrfanKhan-sp3pl Жыл бұрын

How to check this good yeyha bed

@JADDownunder Жыл бұрын

Thanks Irfan! Glad it helped 👍

@educharaba Жыл бұрын

Can you tive me , part number?

@JADDownunder Жыл бұрын

Hi Eduardo, For the gen 3 NM/NP petrol, the Brake accumulator part number is 4630A011. Just make sure you confirm you’ve got the same model and pet number. If unsure ask your local dealership.