How to Replace the Ground Drive Belt and Transmission Hydro Fan on a Cub Cadet Lawn Tractor

Рет қаралды 53,866

Күн бұрын

Cub Cadet LTX1050....and other models.....Belt just wore out after 8 years and jumped off the pulley....broke the trans cooling fan off in the process. I will show you how to replace the ground drive belt and the transaxle fan.
Get your belt 754-04207 here: amzn.to/2Wdi2mo
Get your transmission hydro fan here: amzn.to/32ijtDI
Thanks for watching.
Buckwsr, Putting the "Do" into "Do-It-Yourself"

Пікірлер: 40

@josmith5459 19 күн бұрын

Great video.I have a troybilt that I have been trying to get the adjustment right on forever and couldn't find any adjustment information on. Thanks so much.

@BartHull 2 ай бұрын

I just completed a drive belt change on my LT1550 tonight. Thanks to your video I knew to pull the PTO and the deck. It went easy as it a Arizona mower (No rust or corrosion.) Even cleaned out the mower deck and balanced it side for side. It liked to lean right side down.

@ramathorn1982 Жыл бұрын

If anyone was wondering what happened when he tried to start it after the repair (like I was because I had clicks instead of starting too), a good cleaning of the battery terminals cured that issue. Thanks for the video, it helped me replace mine today and I'm the proud new owner of an impact wrench which made this job pretty easy.

@Buckwsr Жыл бұрын

Thanks so much for watching the video.

@dburd01 3 жыл бұрын

Your video was helpful. I had to tip the mower up on its rear wheels and vice grip the plate on the 5/8” nut while I hit a socket wrench on the bolt to break it free. It was a bugger!

@Buckwsr 3 жыл бұрын

Glad you got the job done!

@nad1157 3 жыл бұрын

Thanks so much for the video. You answered a couple of big questions that I had, like how I was going to hold the hydro pulley in place. Your video helped my own belt and fan replacement go alot smoother

@Buckwsr 3 жыл бұрын

Thank you! Glad you got the job done successfully!

@bodhiarlo6909 2 жыл бұрын

I dont mean to be off topic but does someone know of a method to log back into an instagram account? I was stupid forgot the password. I love any tips you can offer me

@harpergenesis5289 2 жыл бұрын

@Bodhi Arlo Instablaster ;)

@bodhiarlo6909 2 жыл бұрын

@Harper Genesis thanks for your reply. I found the site thru google and im waiting for the hacking stuff now. Takes quite some time so I will reply here later when my account password hopefully is recovered.

@bodhiarlo6909 2 жыл бұрын

@Harper Genesis it did the trick and I now got access to my account again. I'm so happy:D Thanks so much you really help me out!

@michaelleonard7263 4 ай бұрын

Great video. You can access the fan by removing the battery and lifting out the battery compartment.

@tracyclaystowell6431 2 ай бұрын

Should have got a Dewalt impact, lol Clay . I think the impact would work on the transaxle nut also and an easy fix by taking seat, battery box and the fenders off. Then you can get the idler pulleys off to change bearings. Mine were really noisy.

@tty04 2 жыл бұрын

Thanks for video. This provided a lot of perspective to what I needed to do. A neat trick to get the PTO pulley off is to remove a spark plug and stuff the cylinder with a rope to sieze the crank shaft. Also, my drive pulley was super stuck and I bent the flange while prying it off.

@Buckwsr 2 жыл бұрын

Good tip, thank you. And yeah, when those pulley seize onto the crankshaft, it's a nightmare to get them off.

@tdkcak 3 жыл бұрын

If you pull the battery and battery pan, this will.give you better access to the bolt on the pulley and to route the new belt. Good video though. Thanks.

@Buckwsr 3 жыл бұрын

Thanks for the tip!

@gamlielu 10 ай бұрын

thank you for the nice video, missing the belt installation but very nice. i believe this video will be good for Cub Cadet LT1050. I will let you know

@strawboss59 2 жыл бұрын

Very nice how to, I like it.I've done this job myself and would suggest that it's possible to overtighten the bolt holding the PTO on, especially when using an impact wrench, if one just 'uggaduggas' the bolt with a 1/2" impact you can FUBAR/distort the PTO,breaking it and that is a $100 item, at least. Borrow a torque wrench if you don't have one and tighten to approx 50-55 ft lbs.Oh, and apply anti-seize to the shaft so the next removal of the PTO & engine pulley goes smoothly

@Buckwsr 2 жыл бұрын

Thanks for the helpful suggestions!

@householdhacks 3 жыл бұрын

to lock the pulley so you can use a breaker bar can you use a vise grips on the rim of the pulley then rotate it until it hits the frame/suspension?

@sebenro12 3 жыл бұрын

Mine just did the exact same thing. Probably going to go in from up top or through the battery port when the parts come in.

@Buckwsr 3 жыл бұрын

Cool. Good luck with the project!

@sebenro12 3 жыл бұрын

@@Buckwsr didn't work. Deck and pulley had to come off. Lol!

@stephenbrewer7569 3 жыл бұрын

Instead of doing all the hard work there are 4 bolts you can loosen the motor...I just done this today...just raise your motor up on the driver side after it is loosened align you drive belt on pulley of motor then feed going to transmission...

@tercuman7374 2 ай бұрын

Do I have to pull steering column to put belt on front?

@gilleschampagne1922 2 жыл бұрын

Thank you

@tkskagen 4 жыл бұрын

"Almost" would have been easier to remove the Rear Body to access the Fan...🤔 Just 6-8 Bolts, & ALOT more room! Take care, 🤓 -Thomas Port Orchard, WA (Just West of Seattle, Washington)

@williammaxson7697 Жыл бұрын

My 23 horse Cub cadet has got a PTO problem I have it engaged I'm running the mower and about 5 minutes it'll shut off the mower will shut off everything else is running fineI shut the mower down turn it back on it' will work for a few minutes what could be the problem with the PTO I bypass the switch so I know it's not the switch I'm running straight to the PTO with my power

@williammaxson7697 Жыл бұрын

I'm having a problem with my PTO on my 23 horse Cub cadet bypass the switch the PTO work and mow for about 5 minutes then quit then I have to shut them over down and do it all over again and it'll run for about another 5 minutes and then the mower deck will shut down the rest of the mower will run fine

@Buckwsr Жыл бұрын

Check the battery. You must have a fully charged strong battery for an electric PTO. Even if the engine is running, you still need a strong fully charged battery. Engine off, the battery voltage should be 12.5-12.7 volts. Less than that, and it might be on its way out....

@timmywade1313 Жыл бұрын

Take battery & the box out to get to transaxle

@markbanks6620 2 жыл бұрын

I am confused why my clutch is not coming off? Also, I was able to take the bolt off the clutch with a socket wrench…. No impact and I did not have to hold the flywheel either. The clutch is not budging at all. Help please. My grass is growing quick. Lol

@Buckwsr 2 жыл бұрын

Hi Mark...I'm wondering if the electric PTO clutch is frozen (siezed) onto the crankshaft? Apply some PBblaster or other penetrating oil generously and let it sit overnight. Also some gentle tapping with a hammer....just don't go nuts on it. Good luck.

@markbanks6620 2 жыл бұрын

I just came across a video where someone unbolted the engine without even taking off the clutch. The belt went right on. I’ve sprayed some PB blast on the clutch, but I might look into that other way as well. Thank you

@ds7193 4 жыл бұрын

Maybe I should just not say anything, I don't want to sound like these people, who seem to watch other folks videos just to try and rip them apart. That's not me, i promise. But you labeled this video, How to replace the ground drive belt and transmission hydro fan on a cub cadet lawn tractor. All you showed was how to remove a bolt and drop the pto clutch. Then use a hammer to remove the drive pulley, and here it is done.how to video, I don't think so.

@Buckwsr 4 жыл бұрын

I understand your point. But I do recall mentioning the difficulty in filming all the steps in live action, as it's tough to lay on the ground with a camera in one hand, when you really do need to use both hands while working in confined spaces. I would still like to think that if you need to replace the drive belt on your tractor, this video would be of some help to you before tackling the project.

@Redneck_Ed 3 жыл бұрын

I see your point, but the those two steps are the big ones. Everything else is nothing more than routing the belt around pulleys and even with the most perfect video, you really need to jut follow the belt routing diagram in your manual to get it on there properly. This is a solid video. My issue with the video is that I'm mad that his drive pulley came off so easily, haha. I have videos of my LT1018 for drive belt and engine replacement and that damn pulley was on there tight. Even with the engine completely off when I replaced the engine and using a pry bar, I couldn't get the pulley to move.