Рет қаралды 17,641
Find the parts used in the video on CarParts.com just there carparts.solutions/ram 1500
⚙️ NEEDED CARPARTS AND PRODUCTS
- Oxygen sensor : carparts.solutions/OxygenSens...
- Copper grease
💪 TIGHTENING TORQUES
- Oxygen sensors : 22 Ft-lbs
🛠 TOOLS
"The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 :
- carparts.solutions/ToolBox"
List of the tools we used to replace the oxygen sensors on a Dodge RAM 1500 :
- Hydraulic jack : carparts.solutions/FloorJack
- Jack stands : carparts.solutions/JackStands
- Wheel lug wrench
- Ratchet
- 8mm socket
- 22mm wrench
- Hammer
- Wire brush
- Paper towels
"- Torque wrench :
20 to 250 Ft-lbs carparts.solutions/TorqueWren...
100 to 600 Ft-lbs carparts.solutions/TorqueWren..."
Don't forget to subscribe : / @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 RAM 1500
- 2010 RAM 1500
- 2011 RAM 1500
- 2012 RAM 1500
- 2013 RAM 1500
- 2014 RAM 1500
- 2015 RAM 1500
- 2016 RAM 1500
- 2017 RAM 1500
- 2018 RAM 1500
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to replace the Battery 2009-2018 Dodge RAM 1500 ⚡: • How to replace the Bat...
- How to jack your Dodge RAM 1500 safely : • How to jack your 2009-...
⚠️ CARPARTS.COM'S INFOS
- We advise you to start your vehicle and let it warm up.
- In preparation for installing the new oxygen sensor, clean its housing if necessary using a wire brush and a paper towel.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:11 Tips
0:23 Disconnect the battery
0:50 How to jack your RAM 1500
1:30 Localize the oxygens sensor + explanations
2:12 Disconnect the oxygen sensor
2:29 Remove the oxygen sensor
2:52 Screw the oxygen sensor back + tightening torques
3:29 Reconnect the sensor
3:49 Lower the truck