Thanks so much for putting out this video. Seeing the clips and hardware put on made the job so much easier. You're doing a great service for people who want to do this job on their own or can't afford to pay a shop.
@shunickesmith6 жыл бұрын
This was one of the best auto repair videos I've ever used - great video, short, quick and to-the-point! The bolt size for poping the rotors off is M8x1.25 - anything longer than about 20 mm would do the trick. Thanks Arty!
@aaliyahrye43363 жыл бұрын
Of all the similar videos that i watched this the most helpful, accurate and precise. A zero knowledge and non experience person after watching this video can perform this task without any problem.
@andyleo8418 Жыл бұрын
This video has the best lighting and camera angles of all the brake job videos I've seen.
@flyerixmk17 жыл бұрын
This video explains brake replacement better than any I have looked at so far. Thanks for posting.
@PickyOne6 жыл бұрын
you're the only Sienna video who showed us how to put the retainer clip, I wonder why others ignore that. time 3:16
@gregm8418Ай бұрын
Great video. Thank you for taking your valuable time to help us repair our Sienna’s.
@thisperfectworld7 жыл бұрын
This is easily one of the best how-to videos on car repair that I've watched; thanks, Arty! It's complete, concise, and simple. Couldn't be better!
@DaveC-sx3gl4 жыл бұрын
Absolutely terrific video with explanations as things are being done. Best video I've seen so far.
@nlightening77647 жыл бұрын
Thank you for posting this. The tip about using the screw to take the rotor off really helped.
@artysgarage69077 жыл бұрын
+NLightening7 consider subscribing n funding my channel anything can help thanks ▶️kzfaq.info/love/LYIfGmlAnFzHfS1xmTQKlw
@kevinkennedy40526 жыл бұрын
Yes, Pump Those Brakes after! Thanks Arty for a great refresher.
@chaywarburton3488 Жыл бұрын
Just got my rotors from rock auto myself today. Thanks for the video!
@brucewmclaughlin9072 Жыл бұрын
Woohoo that looks real easy and the shop down the road wants 870.00 to do the front brakes on my new to me Sienna that atm does not need brakes but when it does I will be watching this again.
@AnthonyRoadkill3 жыл бұрын
A few things: 1. Synthetic brake grease goes on the new caliper clips, the ones that are touching the brake pads. 2. Silicone brake grease goes on any metal part that touches any rubber, like the caliper slides. 3. The two v shaped springs that you installed that go on top of the pads are pretty much useless when bent so much. I know why you did it, to ease the installation, but they actually need to hold tension outwards, to keep the pads away from the rotors and causing drag while driving. 4. Hub needs to be cleaned up before installation of rotors. NEVER put anti seize or never seize anywhere NEAR the braking system, including on the hub behind the rotor. Seen that alot here on KZfaq, but props for not doing it! Otherwise this is a very informative video, thank you for taking the time to educate the masses!
@CombatArms22274 жыл бұрын
Out of all the videos I’ve watched this was one of the best. 👍
@artysgarage69074 жыл бұрын
Thanks 🙏
@matthewdo90276 ай бұрын
ah ha, now I know that a special tool to compress the caliper is not required. Thanks for the tip sir.
@hillshepherd94445 жыл бұрын
IMPORTANT !!!! When you take the caliper bracket off, clean out the "pin well" in the bracket, shoot with brake clean & a piece of rolled up cotton tee shirt, shoot again, and & then the pins,{ if the pins have VERY small amount of rust, clean off with steal wool, {REAL RUSTY? -replace them} let dry, " THEN " re-lube pins with the "NEW" grease & you can install them.
@ArionTrantosakaartysgarage5 жыл бұрын
Yes you’re absolutely correct but before wasting my time if they move freely I just grease them up as shown
@adjustableisland8806 Жыл бұрын
Some very helpful tips in this vid, but surprised to see no brake lubricant and no torque specs.
@_Gabbatron7 жыл бұрын
Saved a few hundred dollars thanks to this video. Thanks!
@artysgarage69077 жыл бұрын
+Christian Mayer i'm happy that's why I do the videos consider funding my channel & at least sharing my video thank you
@adrian21z7 жыл бұрын
Good video, I personally like to also lubricate the back of the pads as well.
@artysgarage69077 жыл бұрын
+Adrian Zamora I would also if I didn't change the rotors but you got new hardware new brakes and new rotors thanks for the wonderful comments and finish out my video thanks
@MikeBosley7 жыл бұрын
Great job, Arty. Excellent lighting - audio - framing. Well done, sir.
@artysgarage69077 жыл бұрын
Mike Bosley thanks mike consider Sharing my video n tell your friends thanks again Artys Garsge🔧 ▶m.kzfaq.info/love/LYIfGmlAnFzHfS1xmTQKlw
@daisybell58846 жыл бұрын
Thank you very much, my dad watched this video after a half an hour of swearing at the brakes and immediately figured it out!
@elicastello3791 Жыл бұрын
Thank you for an awesome Video! It helped me through the process smoothly and was easy to understand! God Bless you!
@gkicks96 жыл бұрын
Thank you so much for this video!!! It helped us a ton. You explained things so well👍
@brianengy7 жыл бұрын
The brake pad clips are in backwards. This will cause premature rotor and pad damage.
@gabrielcortez27137 жыл бұрын
thanks for a proper but short and to the point video. very helpful, saved me a ton of cash! liked and subscribed.
@artysgarage69077 жыл бұрын
+Gabriel Cortez thanks Gabriel consider share my video and subscribe if you like more to come thanks again
@DavidDartsch4 жыл бұрын
Thanks for the great video. Is the procedure for the rear brakes more or less the same?
@kirkohly6 жыл бұрын
Arty, great video, I will be re watching several times before doing the brakes on my Sienna.
@mattkilbourne46543 жыл бұрын
Great video. Clear, clean easy to follow. Thank you so much!!
@FixitMys3lf4 жыл бұрын
Thank you for taking the time to provide such excellent video angles. Great to the point video.
@MrTysonjharris2 жыл бұрын
Thanks for showing the hardware installation.
@hillshepherd94445 жыл бұрын
And make sure "BEFORE " you compress the calipers back down/in --> " YOU REMOVE " the master cylinder "cap" so you don't blow a line out & it makes it much easier to compress back.
@artysgarage69075 жыл бұрын
Hill Shepherd Yes you absolutely right but the reason why I don’t remove the master Thundercat is to make sure all the lines are strong and safe and I should state that if you’re going to blow the gonna blow at least a blow on me thank you for your wonderful comments hello
@khoalam907 жыл бұрын
Wonderful video!!! Thank you very much. You just saved so much trouble and money.
@artysgarage69077 жыл бұрын
Lam Nguyen consider sharing my video to your Facebook / social network friends thanks for your wonderful comment
@blueskunk91634 жыл бұрын
Outstanding video! Thank you for sharing your knowledge!
@familyaccount95764 жыл бұрын
Well done video! Clear, to the point, thank you.
@jah05243 жыл бұрын
No mention of the model year of that Sienna.
@alexwhitt15405 жыл бұрын
Great video! You saved me a bunch of money! Thanks!
@chichixixi993 жыл бұрын
I think you made a dent on the rotor plate with that hammer.. Great videos! lol
@keithb6817 Жыл бұрын
What about the retainer clip person before me didnt put any back on. Does it matter?
@leinadalan2 жыл бұрын
Isn't it bad to push brake fluid back through the abs box? I was taught to open the brake bleeder and expel fluid from it, top off reservoir as needed.
@Keyanandthedogs6 жыл бұрын
Best video i found great job made job easy!
@snowubj3 жыл бұрын
i'm going to diy rotor, wondering if that shim position is correct? 2:40 or should be reversed? thanks for your video
@keithschumacher87626 жыл бұрын
Very informative video. Made it easy to do the job correctly! Thanks
@tinchote2 жыл бұрын
In my van, it was impossible to loosen the caliper's lower bolt without first loosening the top one a bit.
@cjcoolmoed5 жыл бұрын
Great video thanks for posting!
@kriswalkowski27912 жыл бұрын
Best video!
@hillshepherd94444 жыл бұрын
If you take the master cylinder cap off before you try to compress the calipers ,they're much easier to compress.
@artysgarage69077 жыл бұрын
Thank you very much Mike it means a lot I try hard please consider sharing my video/channel to your friends
@GWA12255 жыл бұрын
Arty's Garage What about lubing the pad guides? Needed or no? Why not throw in the torque values for those of us that have torque wrenches? Does it matter where the brake wear noisemaker pad clips are placed? I’d heard top, inside pad. Nice job, thanks.
@bigsmoot63 жыл бұрын
Thanks bud!
@michaelengle90625 жыл бұрын
same procedure on a 2014 Sienna?
@MT00708 жыл бұрын
Hey Arty, what size threaded bolt did you use to pop the old rotor off? Thanks for the detailed video. 👍🏻
@artysgarage69078 жыл бұрын
+Mourinho M I believe they are threaded 8 mm bolts
@jessehales2 жыл бұрын
Thank you so much for the help!
@sds205t3 жыл бұрын
Very very good .thanks
@Keyanandthedogs6 жыл бұрын
Do u have to put the clip on top of pads back to new pads that clip on at the top when putting on new pads.they didnt have clip on it?
@larrytam92696 жыл бұрын
This video was spot on. Thanks!
@sgcole11110 ай бұрын
No copper grease on the brake hardware for easy sliding? Did you clean the hub prior to insalling new rotor? Several steps missing, seems like a 'rush job'.
@Kevin-mp5of3 ай бұрын
Total hack job
@HuntFishLifeOutdoors6 жыл бұрын
When pushing in the dual pistons do you have to have the lid off under the hood on the brake fluid container
@artysgarage69076 жыл бұрын
No
@geraldritchey48223 жыл бұрын
good video.
@waleedal-mahdawi85794 жыл бұрын
Your video the best
@youdagoob7 жыл бұрын
Excellent video. Thanks.
@artysgarage69077 жыл бұрын
+web thanks consider sharing my video please
@arribasn5 жыл бұрын
LOL, "Go a little more professional with Harbor Freight brake tool" thumbs up!
@Montana20064 жыл бұрын
Are raybestos a good quality product? Thanks 🙏
@artysgarage69074 жыл бұрын
Yes that one of the top brakes out there in the market
@hillshepherd94444 жыл бұрын
what " size " ( & is it fine thread or coarse thread ? ) did you say the bolt was to remove the rotor instead of banging with the hammer ?????
@artysgarage69074 жыл бұрын
I’m sorry I can’t help you with that I’m not quite sure but I know it’s a fine thread and I really don’t know the size just bang the hell out of it both sides and the front slam in the back turn it in I’m in the back I’ll come out
@genehuff44823 жыл бұрын
@@artysgarage6907 bolt doesn't work!
@artysgarage69073 жыл бұрын
If you're changing the rotors just slap it with a hammer keep on slapping it
@TheJohn57106 жыл бұрын
Solid video. Thanks!
@bjthe3rd7 жыл бұрын
Arty, what size bolt was used to help remove the rotor?
@artysgarage69077 жыл бұрын
+bjthe3rd I believe it's the 20 coarse thread bolt or if you can't find it just slap it with a hammer front and back you'll get it out don't worry to hit hard
@JRec-ql5fc2 жыл бұрын
no need to bleed the brakes??
@fh34862 жыл бұрын
Thanks
@liveandletlive28945 жыл бұрын
Same for a 2015?
@artysgarage69075 жыл бұрын
Yes
@chrisszeliga11787 жыл бұрын
Thanks!
@artysgarage69077 жыл бұрын
+Chris Szeliga thanks Chris confeder n share my video to your social network friends Facebook Twitter etc.
@bubbamcflubba58957 жыл бұрын
What year sienna is this?
@artysgarage69077 жыл бұрын
+Bubba Mcflubba or siennas have the same procedure I believe the 2010