a video of replacing both tracks on ditch witch sk750 and readjusting track tension, hope you enjoy, please like, subscribe and comment
Пікірлер: 37
@jrac8633 жыл бұрын
Great video my friend .This really helped us to replace our tracks on our sk752
@SouthernMechanic3 жыл бұрын
Awesome!!! Glad I could help, thanks for watching!!!
@UberKrispy3 жыл бұрын
Good work brother, take care
@SouthernMechanic3 жыл бұрын
Thanks!!!! You take care as well, thanks for watching
@ced37894 жыл бұрын
Great video quality, thanks
@jepyraco3 жыл бұрын
Really really helpful, thank you. Looks exactly like my 752, so I should be good now
@SouthernMechanic3 жыл бұрын
Your welcome, glad I can help, they are all pretty much the same so you should be good to go 😊
@alexanderwest983 жыл бұрын
Great Video keep up the good work
@SouthernMechanic3 жыл бұрын
Thank you!!! Thanks for watching
@Pesimelaki292 жыл бұрын
Thanks for your help
@SouthernMechanic2 жыл бұрын
Your welcome, thanks for watching!!!
@jasongravelman82933 жыл бұрын
Great job
@SouthernMechanic3 жыл бұрын
Thank you!!!
@jareddisalvo4313 жыл бұрын
Can you do a video of 100 hour maintenance on this machine
@SouthernMechanic3 жыл бұрын
Sure can, actually have an oil change due on it now
@willz92872 жыл бұрын
Good videos man. Where can I get an adapter or pressure gauge/adapter to get grease into my sk750? I bought it used and there is no adapter or gauge anywhere on the machine. There’s only the check valve on there, no zerk, and no adapter. I need to get new tracks on there.
@SouthernMechanic2 жыл бұрын
Should be able to through the dealer, down here for me the dealer is Stowers machinery in kingsport tn, if you cant find one anywhere else I'm sure you can call them and they can either find a dealer close to you or ship directly to you
@garetnunan63252 жыл бұрын
What attachment is at the end of your grease gun to get the grease into the machine? I rented one and the track came off. I got the track back on but my grease gun doesn't seem compatible to putting grease into it.
@SouthernMechanic2 жыл бұрын
Should just be a regular grease fitting, does your not fit at all or does it just not pump up?
@garetnunan63252 жыл бұрын
@@SouthernMechanic I guess it seems like they're both female ends. There isn't a way for one to go over or inside the other. I noticed yours went over it and seemed to clamp down.
@SouthernMechanic2 жыл бұрын
@@garetnunan6325 I have a lock N lube on mine but it's still a regular grease zerk though, look in the rear compartment of the machine, they usually have an adapter or grease pressure Guage in that tube along with the owners manual
@KG-bp3qp3 жыл бұрын
Hey man thanks for the post -have the same machine but can’t find a hydraulic fluid. DW says any THF but any particular one you recommend?
@thephishh3 жыл бұрын
I run the John Deere blend from any farm store in mine
@jasonguy14972 жыл бұрын
Know this is old but I’m a tech at a DW dealer and sae-20 or AG-20 hydraulic fluid is what we use and recommend.
@KG-bp3qp2 жыл бұрын
@@jasonguy1497 I just replaced the radiator on a 2015 sk750. Never the f again. Took me 20 hrs
@jasonguy14972 жыл бұрын
@@KG-bp3qp these things are not built for easy access lol. I have an 850 in with a hole worn in the bottom of the oil pan. Whole engine has to come out.
@landofthefree20233 жыл бұрын
Is there a pressure gauge for the grease insert? Should be up inside the lever console behind the panel in front of where you stand. Should be on the right side clipped to the frame
@SouthernMechanic3 жыл бұрын
Supposed to be but is usually lost within the first few months of these larger companies owning them and the employees losing stuff but you get a good feel for track tension after doing them for 20 years lol but I have used the guage before and I'm usually right on the mark when comparing it with the guage
@landofthefree20233 жыл бұрын
@@SouthernMechanic thanks for the feedback! And great reassurance from your video. I have a rented ditch witch sitting on job site with track off. Rental said they will tow it on Monday I rented it for the weekend to get the job done. Don't think it has a grease fitting if it's the same one I rented a few rentals ago. And had to put track back on after turning incorrectly. It took me three hours with help. Hoping only an hour this time without help. Your video is added encouragement.
@SouthernMechanic3 жыл бұрын
@@landofthefree2023 your very welcome, if you run into any problems feel free to message me, I get youtube notifications on my phone just like a text
@landofthefree20233 жыл бұрын
@@SouthernMechanic Wow! Thanks a lot!
@thephishh3 жыл бұрын
What tracks are those?
@SouthernMechanic3 жыл бұрын
I'm not sure, the company bought them and I I stalled them but I didnt look at who made them
@jakeobbrown4743 Жыл бұрын
Bro I need ur help like right now if u can how do I get this dang track back on.on a ditch witch 600
@SouthernMechanic Жыл бұрын
Sorry for the late reply, did you get it on yet?
@jakeobbrown4743 Жыл бұрын
@@SouthernMechanic all good brother yes. Thanks
@SouthernMechanic Жыл бұрын
@@jakeobbrown4743 your welcome, sorry I couldn't help sooner