How to Reset CMOS - Reset BIOS Fix Display Issues!

Рет қаралды 114,520

3 жыл бұрын

How to Reset CMOS and Fix Display Issues. If you are using a computer with Windows 10 and have found issues like your display stops working all of a sudden, this is a potential fix for display issues like this.
You can also reset your CMOS - Reset BIOS by removing the CMOS battery for 1-2 minutes and then turning your computer back on.
Some motherboards don't have the CLR_CMOS pins on the motherboard so you may not be able to clear your CMOS using this method.
You will have to reset your CMOS using the method by removing the CMOS battery. If you can't find your battery you may have to remove your Graphics card.
Another option is to update your BIOS in the hopes this resolves whatever issue you are experiencing.

Пікірлер: 106

@TheForgottensands Жыл бұрын

Thank you so much!. this helped me.

@Emoxe Жыл бұрын

worked for me i stupidly overclocked my ram slightly but i tried it and it worked thanks

@royvelasquez2183 4 ай бұрын

Very helpful! Thanks!

@anoop_js Жыл бұрын

Thanks brooooo.it really helps me so much

@briangwapo3252 Жыл бұрын

From cebu Philippines, thanks so much sir

@chrissinclair2414 Жыл бұрын

Thanks for this guide it worked 😁

@PhotohackLovers 9 ай бұрын

if you reset the cmos will it boot from the m.2 drive that i just cloned cause its not and the bios is not displaying correctly, I upgraded my hard drive from 1tb to 2tb i tested the cloned drive and its 100% healthy but it wont boot

@newlimpact8695 2 жыл бұрын

Can i ask we do this by having power?

@gamingandtutorial1745 Жыл бұрын

Omg, thank you so much, i thoght i was gonna send my pc to service again, but then you came up. Thank you so much you saved my life literarlly!!!

@RollwithPunch Жыл бұрын

You are welcome!

@jaroslavnovak1439 7 ай бұрын

THX!!! It works.

@busybusiness9121 9 ай бұрын

Not able to reset my CMOS. Unplugged the CMOS battery for 1 hour still no fix. Any help is appreciated.

@asaduzzaman2007 2 жыл бұрын

thank you very much. oh god i was so scared

@BR-ip5pz Жыл бұрын

You can put a flat screwdiver on both pins for a few seconds, and you have reset cmos

@mongol7867 Ай бұрын

i m coming from the vanguard thing and i activate the secure boot but my bios screen is not closing how can i savr and exit from this screen

@mongol7867 Ай бұрын

I really need it rn

@mongol7867 Ай бұрын

I really need it rn

@saucysuishi341 Жыл бұрын

Thank you so much. I was getting. No array detected.. on a new(second hand) pc 🎉🎉🎉

@RollwithPunch Жыл бұрын

No problem 👍

@nitronite3689 10 ай бұрын

I did this and now my pc wont turn on at all. Just great

@muhammad1616 11 ай бұрын

Man thank you 💖❤💛🧡💕💞💌

@FutureDreamZz 3 жыл бұрын

My rgb lights came on after resetting but still having no signal when connecting to my monitor

@RollwithPunch 3 жыл бұрын

Try removing your graphics card and checking the contacts on the PCIe slot. If all looks fine, put the card back in and try again. If you have integrated graphics, see if they work.

@kyliecharbonneau8249 2 жыл бұрын

I did everything you just showed, as well as removing the battery and nothing worked. The PC runs, but no display. The graphics card is on - the fans are spinning. It was working fine until I stupidly adjusted the wrong settings in my BIOS

@Vug6r 2 жыл бұрын

Did you changed graphic card to switchable? I turned my laptop on and waited like 4 hour. Then it turned on automatically. Its pretty stupid solve but worth trying

@abhishek_02 Жыл бұрын

Hi, did you fixed it?

@zyxified3518 Жыл бұрын

I probably did the same stupid setting in the bios, same problem. Nothing seems to work :/

@karamnabeel9681 Жыл бұрын

@@zyxified3518 did you fix it?

@xaviertapez8708 Жыл бұрын

Did you ever find out how to fix it

@shibainuxdogocrash1260 Ай бұрын

My pc only work if I rest bios and then suddenly black screen after while and then I have to again clear cmos do you know any solution to this problem?? I tried another slot as well same problem occurs and i got replacement of my GPU same problem happens again

@user-xr1kr4nv2q Ай бұрын

something is shorting your cmos constantly try reinstalling windows

@ivorobotnick6945 2 жыл бұрын

Hi i want to make BIOS reset in mobo gigabyte f2a88xm-ds2 but i have the one question is working this method with out removing the BIOS battery and connect the power button ?

@RollwithPunch 2 жыл бұрын

Yes the BIOS battery does not need to be removed, the CMOS reset switch is what disconnects the battery. you can do it either way.

@dimitrisoen5657 3 жыл бұрын

What would be the next step? I just reinstalled windows 10 on my PC and everything went well until I changed the resolution. Directly after that I got a black screen with the message "input not supported". I tried numerous methods to get into safe mode but I can't find it anywhere. Someone told me to reset CMOS so that's why I'm here. I never opened a´PC before. Lol

@RollwithPunch 2 жыл бұрын

Hi, did the CMOS reset work for you?

@capiscuul 2 жыл бұрын

@@RollwithPunch hey if you're still here I need help, I reset cmos and my pc still isn't rebooting and shows a red cpu light any recommendations

@user-ul5wq3kv4p 2 жыл бұрын

@@capiscuul maybe faulty mobo ?

@orennatan7263 Жыл бұрын

yesterday i watched video that said u need to press reset to setup mode when i tried to active the secure boot, i had beacuse that a black screen and watch video that says take out the battery and touch the cmos with a screwdriver. didnt helped me so i took the computer to the lab....maybe if i would see this video b4 i be able to solve my problem....we will never know

@кетсман 24 күн бұрын

Please tell me if the service helped, what did they do there?

@user-vt4vq6rc8b 2 жыл бұрын

I do this and it worked but again same display problem happening

@ludiikhsan9887 2 ай бұрын

Same bro did u fix it?

@user-vt4vq6rc8b 2 ай бұрын

@@ludiikhsan9887 yes its working! what i do is in the 1st time change the ram and then remove your power button socket and start your pc with screw driver

@ludiikhsan9887 Ай бұрын

But it always happened to me when i turn on my pc at the first time, always no display even when i fix it, it will happen again and again when i turn on my pc on the next day or after i shutdown it

@rlghas Жыл бұрын

I have one beep and can’t seem to find out what wrong, try to fix cmos but can’t seem to get it right

@ALPHAxAMERTO 7 ай бұрын

Did u fixed it I too have the same problem 😢 single beep then no signal but fan runs and GPU fan runs 😔

@rlghas 7 ай бұрын

@@ALPHAxAMERTO yep

@rlghas 7 ай бұрын

@@ALPHAxAMERTO but i forgot how i did it

@ALPHAxAMERTO 7 ай бұрын

@@rlghas 😢

@davidwood1215 Жыл бұрын

Clearing cmos is not clearing bios its clearing cmos like it says and so you know it’s 2 separate chips bios and cmos

@lawbringer2959 2 ай бұрын

Bios settings are stored on the cmos chip

@FF9F00 2 жыл бұрын

Hi! I’m having a “2 beeps of death” issue on my Dell PC, which means it can’t detect any RAM. Previously it was constantly displaying “the amount of system memory has changed” messages upon reboot. Now it doesn’t even boot anymore. I’ve tried reseating it multiple times and multiple ways with no success. Is there any chance this method could help to solve the issue?

@RollwithPunch 2 жыл бұрын

It could be the memory controller in your CPU that has failed or the motherboard has failed. Give this a try first though.

@FF9F00 2 жыл бұрын

@@RollwithPunch Thank you for answering, it has booted up with the new RAM I’ve bought a while ago. Oddly enough, it recognises 16 gigs as 15,8 or something. Also, now it randomly freezes and I have to reboot it every time it does so. I decided to not use that computer anymore, must be some CPU or motherboard issue. It served me great since late 2012, it’s time to rest now :’(

@RollwithPunch 2 жыл бұрын

@@FF9F00 hahah I'm glad it's done well for you!

@PaintedLadyy Жыл бұрын

I was just browsing then my pc crashed, when turned back on there was no display. What I tried was reseating ram sticks, cleaning them but that did nothing. I think the CMOS battery is behind the GPU, I will try that and hopefully that’ll fix my “NO SIGNAL” problem because I don’t want to play around too much in case I mess something up y’know…. But hoping for it to work, otherwise… idk.

@johnmelvin7284 4 ай бұрын

How did you fix it? Im facing the same issues.

@josevaldez8686 2 жыл бұрын

My keyboard is getting power but now the fans don’t turn on

@cynicalcomedian4428 2 жыл бұрын

Oh you have the same issue for me my mobos ports work for a phone charge but ehen i plug in my led headset usb or keyboard they dont light up you to?

@boynorth6130 Жыл бұрын

I done this and now my pc wont boot at all 😢

@michaeljordan1728 Жыл бұрын

Rip ur pc bro😭🙌

@RainersBlago 2 жыл бұрын

I removed the battery and tried the cmos reset, but it didn't work. It did work before when I had the issue before, but now when I try to repeat it it doesn't

@Xanderohh 2 жыл бұрын

Same here it’s really weird sometimes it works other times it doesn’t for absolutely no reason

@b1zaad 2 жыл бұрын

Same :/

@amvzeref8158 Жыл бұрын

It doesnt worked what else can i do?

@pingushark Жыл бұрын

Same for me

@wolfyyy1853 2 жыл бұрын

I just did a CMOS reset (removed the battery and put it back) and my pc turn on but no display, can you please help

@NynkeFdejong 2 жыл бұрын

switch to onboard videocard, maby you need set settings again to your videocard

@KhanhLam777 8 ай бұрын

@@NynkeFdejongI have the same problem with him and tried to use both GPU and iGPU but no display either...

@pricejohn3471 Жыл бұрын

not working.

@m1ch0el69 Жыл бұрын

Bro my pc won’t even turn on now😭

@RollwithPunch Жыл бұрын

if yu have a graphics card make sure you are connected to this.

@konyogony 3 ай бұрын

Nope, you gotta flash your bios

@gatlaraju3239 10 ай бұрын

Bro! First take the motherboard outside and then explain. Otherwise close your KZfaq.

@newlimpact8695 2 жыл бұрын

Can i ask we do this by having power?

@DeTrollyEye 2 жыл бұрын

If you mean having the cable for the power supply connected to it then no to reset the bios you need to have no power at all on the pc or else it will boot and you have to do it all over again

@synderkinn6391 2 жыл бұрын

@@DeTrollyEye like the whole build again?

@DeTrollyEye 2 жыл бұрын

@@synderkinn6391 no what I mean is that you have to turn off the computer again then unplug the cable from the Power supply so you can prevent it from booting. After that remove the CMOS and press the power button for a couple seconds while the computer isn't plugged in so that you could remove every bit of power left to the computer. After that connect the CMOS and plug the computer and boot it if it doesn't work then you can say that the pc motherboard is gone

@Compmag Жыл бұрын

@@DeTrollyEye the PC won't turn on since the power button is connected to different pins. But the power supply can keep uefi data alive.

7:43

How To CORRECTLY Clear Your CMOS

Greg Salazar

Рет қаралды 195 М.