Hi did you find something to do whit the remotes that is not programmable. Mine lights Up blue All the time and can't delete the program :(

@@ronnihansen4212 then you got fixed code remote, need also relay (reaceiver) with fixed code.

Thanks, there are different version of chip, so everyone program in a different way.

dedi irawadi thanks

mrnicehearted thanks, i think the same think, point is in led colour.

My old RC is the red LED light and this one is blue LED light. I couldn’t copy the code. Will order new one with red light.

😂

No it's not infrared controller

if you got round button battery inside, you can't do nothing, i order few of them but figured out that they got fixed code, so you can just pair it with a receiver, but not copy the code.

It doesn't have the round button battery inside..

@@TinC33 How can you pair it to a receiver? Do you know how?

@@RotterdammerInMiami Then i don't know, but there are few different chip, some of them can't be program. To pair with a receiver, find a button on receiver, push it and than push any button on transmitter, than should work.

same here

Yiftach Cohen hy. I also order one more remote last month and also not work, it has some new chip witch can't be programming, there are mentiones into description "FIXED CODE" all you can do with it is to pair with relay, but can't change button position, i solved it on hardware mod, i broke the connection between buttons on circuit and than solder tiny wires on position i want.

OK, Thank you

I have the same problem no matter how long I press A & B together they don’t flash have I got a faulty one

Hi TinC33. Can you explain bit more on your hardware mod for example take a picture & share with us. Thanks. Robert.

DAVID RCHARDS same problem here. Have you resolved it yet? Do we received faulty ones?

I think that's it when it's copied it shoud work, don't remember exactly

@@TinC33 OK- the answer is - only after setting all 4 of them, it goes out of that state

Motya3D thanks, I feel you

Now I know what thick as "two" short planks means

uf lot of work, i don't know, but some of remote got programming pins on the circuit so maybe if you know someone good with arduino and programming, i don't know...

You may got the remode with fixed code, wich can't be programmed.

Yes it writen on the crystal inside it's a small steel component with 2 legs

Paul Broker thanks

Garage door remonte

No, of course not. Your username has X in it - does that mean you are eXtra smart?

Casas daSão C and D button is for reset, A and B is for clone the new code if old transmitter don't work to you so you can't clone it, just reset it and then push the button on the reaceiver to connect with new transmitter.

Ammy Yus sorry but don't know, i ordered many of that remote but almost everyone is different, try to play with programming, i don't got anything usefull to say for you

Yes if you replace the chrystal (metal element on pcb) it is labeled with number 315 or 433, i know every time here and there 315 get out of stock, wait a bit 😉

New model, with round battery? They'r fucked up to connect, all i can do with them is just pair with the reaceiver, but then i got mixed buttons like a is c b is d... So i fizically solder them to right place (modificate circuit)

If you open up the remote and look at the chip. If it is marked SCT2260 then you have been sold a remote with a fixed code it is not a learning remote.

Do you got round button cell inside instead a27? That's some new version i try to do all with them but without sucess, ony think that worked is just connect with the receiver and got one working button.

If you open up the remote and look at the chip. If it is marked SCT2260 then you have been sold a remote with a fixed code it is not a learning remote.

@@scottfleming1514 thanks for info

Jose de Jesus Escamilla Esparza i think that some with red light got fixed code, so you can't programming it. You can just connect it wit the reaceiver (find some button on reaceiver press it and than push any button on new remote). Than you got random button so if on old tx button A mean open door on new remote maybe button D had this function, all you can do there is fisical change the circuit, i do that on one remote, just broke the existed coonection from button and solder piece of wire to other button, hope you understand, but check first if you can connect it.

Thanks for your help. I will try to do it

Hmm i don't know there is a few different chip into that remotes, some of them got fixed code and can't be program. Try to open your key and find a chip and google it's numbers

Maybe this helped kzfaq.info/get/bejne/hNJihNhzubuxl6M.html

You can't

I think no for rolling code there's other chip, they'r mjch more safe.

Shane Nolan there is some new version of it also with blue led but they got difgerent chip with fixed code, so you can't teach it for each button, you just can pair it with the reaceiver and that's it. If you want to change button function you must soldering the buttons.

tintek33, thanks for reply,,,,do you know how to clone it off any button, doesn't matter which one, without soldering, thanks

Shane Nolan find the button on your reaceiver (electronic from door or something) push that button and than push any button on transmitter, they must to pair eachother.

TinC33 I tried to pair new remote with purple-cable garage door opener, but failed. Pushed LEARN button on garage door opener and simultaneously pushed A button on new remote control, nothing happened.

I’m having the same issue. Fucking seller said works with/replaces MCT-3 remotes. Fucking liar. I’m demanding my money back. Stupid dipshits don’t even give you a hint on how to programs them.

Try to find other manual i had one where i need to hold and then push some button 3times to reset, some of chip is just unpossible to learn the code, check on ebay they had some manual in description and try different ways...

Roie Sofer i think you can't open two doors because every reaceiver got his own code, you can try just pair with booth but i think that would not work. Just find the button on reaceiver (door) push it and dan push button you want to use, than go to another door elevtronics and repeate. Thanks

Lili Irani hmm, i don't know, there are many tipe of this remote, maybe you got red led on yours, try to look other video, there are few different ways to program it but for me only this one work.

Lili Irani try just hold the button on booth transmitter without pushing 3 times.

Egzozcu kamil did not worked for me. Pressed LEARN button on door opener and A button on remote without success in pairing. Do you know why?

There are fix code type and learning code type of remotes.

@@TinC33 thanks for information

Negrea Petre hy, i also got some new remote with button battery in it, i don't know yet how to make it work.

TinC33 Ok. Thank you. I ll wait for a response soon.

Ni problema ;-)

Not it doesn’t. It’s shit.

I think there's only 433 and 315 so i doubt about 318... Sure you can try to replace that chrystal, it's just decide on wich frequency the transmitter work. Just unsolder it and replace it to new controller, but try not overheat them too much when soldering.

@@TinC33 Thanks for your reply. I can't decide which to do, fly to the moon or replace the crystal. Ha, just kidding. That is out of the question. Also, who uses 433. Is that popular in Europe or is it also used in the usa. You would think at least one of my remotes would have been compatible. Have a nice Holiday.

I just googled and found an answer to my question. Here it is: However the choice of wireless frequency is inappropriate for use in the USA. In the USA, 433MHz is nearly in the middle of the 70CM amateur radio band. Legally, any transmissions on that frequency can only be made by a licensed amateur radio operator.Mar 18, 2018

@@llamamom100 i think there's no problem with that low powee signal, that's tottaly comercaly frequence, so im pretty sure you can use 315 or 433 safetly in usa, eu or wherewer you want. Heave a nice holiday also you and your family

Yes there are many different remote with same housing, i got one with round flat battery in it, and i can't program them, because they got chip with fixed code all you can do with them is pair with reaceiver but can't be progtam each button.

ok that makes sense . thanks for clarifying

kembo capelsii "remote relay 4ch" from ebay

TinC33 thank you. this work with all kind of remote control? because I need to read the rf signal of my remote control and to duplicate it in a other one for my girlfriend.

I don't know, there are many different remote, try to watch any other video with different method. But before be sure that you got the right frequency there are 315mhz or 433mhz or hz i don't remember exactly

yeah its a 315 and its for 433

Yea, you maybe got newer version with button battery in it, they are pain in the ass, someone can be programmed but someone not i think, i also try everything with new version but got only one working button.

Same problem

me to, blue light blinks rapidly

Hi i just figured it out that if it wont blink , u dont neet do reset it , clearing code directly from the device that the remote controlled and connect to the new one . Hope u understand my language coz english is not my primary language

özgür teyhani i think no

Check the reaceivee what frequency work on 315 or 433mhz and if there is some bind button so you can pair it with any code on any remote.

@@TinC33 how do I check

@@TinC33 no bind buttons r there

@@tgsandeepyt2740 then try to contact producer of whathever it is

@@TinC33 sir it is a scooty I asked showroom guy saying that 8 - 9k for it if change encode of new remote and decode new it works or not plz reply sir plzzz

That's an old vid, i use white now, but more or less i use my voice to speak in latest videos, even if my english is soo bad..

I'm the same, just got them off eBay, won't work, blue led lights won't flash with any combination, mine are very same as in this video

@@shanenolan704 I have a new one from China and it will not blink or flash. Any idea how to reset these new ones?

@@andybull6828 no, I bought a six pack on eBay, waste of money, can't clone any of them,

You may got remote with fixed code, check my other video abour rf relay, link is into comment section

TinC33 I only have the Remote

@@Feuchterbandit1 yes but in that video you can see the difference between fixed code and programmable remote

TinC33 and how I can clear the code ? Can I show it to you on what’s app haha ?