I use this product twice a year on my avalanche Only product that has Worked for me. And it’s only $10 It’s dirt cheap Compared to other products That don’t even come close to this product results

Would be nice to hear you along with video but the 80's porn music is a bit loud...

Watched the video and ordered some for my Avalanche from Amazon. It worked like a charm thanks Daniel!!!!

This has been my go to for restoring the plastic on my Avalanche since I first got it in March of 2020. It's easier just to give you truck a good washing. And don't worry about the panels. I weigh about 200 pounds, and I can stand on them, though I usually take them off to do the top. Motthers Back To Black is also a very good product. Don't even try Armor All. It won't work. It's like putting water on it. And don't forget to put something on the rubber seals on the panels, and if you have the sunroof, do them also. It keeps them from drying out and leaking. You can use Armor All on them. Thanks for the video! Great information.

Clean the faded plastic with white vinegar and a scotch brite pad first then treat with restorer product and it will look new instantly

Thanks for the video. My dad and I just tried this on my avalanche and it looks amazing. Appreciate the tips, too:)

Awesome....hope it doesn't fade back after washing..it brought your plastic back to life...

used it on my used Av just purchased and it worked great. mine was almost a white grey from color fade. nice and black now.

certainly will try this out

THANK YOU! Just did this today on our Avalanche and it was amazing. Was terribly faded , now looks like new.

actually works. we tried it.

You did a great job on your truck , I need to do that to my 02 avalanche 👍👍

I tried some of this stuff but only lasted a couple of months. I said heck with that and started using KIWI Black liquid shoe polish and I did not have to polish it or anything. when I would get just a little bit on the paint it would wipe off very, very easy with a paper towel or rag. I did all the black areas with one bottle of the shoe polish and had some left over. The KIWI Black shoe polish was just a little bit over $4 at Walmart. It has been on for over 3 months and still doesn't need another application yet. I can't guarantee it will suit your needs, but it sure works great for my 2004 Avalanche.

Looks just like mine. Color and all!! Love it!!

Great tip I have tried this and works great, finally got over it and started to use a heat gun. Works better give it a try

Looks so good!!!

what can I use if the material is felt (under the back windows - where the speakers are)?

Is there a coating to seal it in? Concerned about how long this will last through the harsh snow where I live and through car washes.

Looks nice. Gonna try this out.

Appreciate the video just got a 2010 avalanche and ganna grab some bottles of this now

Thanks for the video

Painting works fine....krylon fusion looked perfect after 5 years when I sold it

Does it give an estimation as to how long an application will last before needing another fix?

Nice video thanks

God the music is driving me nuts.

I used Wipe New . Lasts a year. Springtime project so the truck looks great for the summer

It v. Nice. Will not think about painting by black

Gonna be buying this stuff for my avalanche just to see how it works. Some people say it does or does not. I mean either way, no matter if it's cheap or something better, I'm sure it's 50/50 either way.

Looks good, looks like new.

Best stuff I found I usually got put 3 applications on to get it black, then every month I just buy a 5 dollar tire shine foam spray can, keeps it fresh

You should try Car System Restorer. You'll never use anything else. A $32 can will last for many applications. Your plastic will look like new for a year or more. I'm not paid by anyone. It just works perfectly.

How does it hold up in the car wash? I like to power wash mine.

Grasias salvaste mi avalanch ya la. iba avender pro el pastico😯

Awesome

good tip

Looks like there is some curing time - good to know.

Thanks for the tip however,, painting with the proper paint is possible and that paint is plastic bumper trim paint..Suggestion, next time when restoring the cover do like mopping a floor and work your way to the outsides from the inside, much easier to access.

@2:15 this music plays in my head as I restore my Avalanche 💪

How good is this product?

nice

Can ya wash it after a day or so ?? And how many times do we have to use the product???....

Used 4 bottles of black trim spray paint took me hours after taping everything and then I see this lol

Ive been using the Maguires since I cant find the Woody's anymore and I don't think its that good! Takes way more scrubbing and doesn't last as long. Glad you all had good results maybe forthe first time but subsuquent aplications don't workasgood.

you can purchase this item from the link in the description below

Sounds like an Early 90's porrn

Hahaha as an avalanche owner there are two colors of cladding light grey and dark grey but never straight black. The dark grey almost looked black as I'll admit, but when these people who put the dyed black restoration products on start to wear off it looks terrible and blotchy. Heat guns wreck the texture appearance and make the plastics more brittle over time..there is unfortunately no permanent restore product. I like mothers back to black that's safe for all colors of plastics, very similar to meguiars and depending the severity more than one application will be needed. If you do have black trims the dyed stuff will be ok. The most important thing I've found for my cladding is to clean it thoroughly with a stiff scrub brush like a deck scrub and dawn dish soap. Dont use regular wax enhanced car soaps for this process it is a cause in discoloration of trims and plastics. Also these products dont apply well in direct sunlight or after the plastics have baked in the sun all day and let them cure before adding another coat or getting wet. I like to do my trims and plastics first then I can do the painted surfaces and not be like i just got that on my freshly cleaned fender. Once the products cure they dont wash off easily and soaps and water should bead off.

How long does it last?

So how many bottles total did you use? Cause my avalanche needs this.

Looks like a lot of work for something you have do twice a year? SEM makes Paint/Dye for different plastics, it never chips, I don't know how long before it fades again, it is at least a few years. Anyone out there used the SEM stuff?

Maquires tire black sprays takes no rubbing whatsoever

just use Teak Oil Youll be glad you did

How many bottle would o need for the whole truck?

How long does it last and where do i get it ??

Ill be surprised if the oily fim you said is left behind doesnt attract dirt and dust like most other products.

after a few washes does it Wash OFF and Go Back to Faded PLASTIC

Bondo brand of Back to Black (Walmart) $!0.00, works better, lasts longer. I use garage, but have not had to redo the black plastic in a least four years.

You could also cover it in motor oil which is basically what you have done. Its greasy and oily and will pick up any and all dust around. Their are so many other/ professional solutions that will solve this issue personally

Can I still wash it and it will stay black?

How many bottles did you need?

Does it attract bugs???

Very cool music!

How many bottles for the whole truck?

Bottle says it only lasts for weeks? How long did it last?

Holy shit man, turn the music up a little higher, I can still kinda hear you

Hey Daniel! How long does it last?

Daniel, You need to review your videos before making them public. Besides the wind blowing into the microphone, you have music playing in the background which is not only annoying but over takes your voice, making it extremely difficult to hear you. You might think it adds to your video, but it does just the opposite. You need to cut the music out and we'll be able to hear you a lot better. Thank you I have tried the product and Yes it does the job. Makes my Avalanche look new again.

between that awful music and the wind noise -- ugh. I appreciated the tip though

Don’t you have to start with washing it first?

Use a heat gun or a torch its super easy and it lasts did mine and it looks new. You don't have to worry about washing the plastics other just when your using heat Act as if your painting and you don't want to create a drip in the paint

How’s the shine a year later

You should turn the music up…

Get a bottle of armoraall will restore all composite

Until it rains!

best to watch this video with the sound off

I like your video but between the wind noise and the background noise I could barely hear the words being spoken. I under stand wind noise is difficult to control however please get rid of the disco music that made it extremely difficult to hear. When I tried to turn volume up for voice I got louder music lose-lose!!

its only 8.44 at walmart

sorry the music is annoying

All that oily residue should tell you something about the product.

Here’s a link to the background song Truckee, I always listen to it when I apply this product to my AVY. Great video and music !! I could use a little more of it. kzfaq.info/get/bejne/q62Dfc-Avt2tqHk.html

only works for a while and it drips and runs on paint

The product is good but the music sucks.

Your background music is too loud. It's now foreground music and your voice is background noise.

Get rid of the background music.

Your music is mixed WAY to high, makes it difficult to hear you.

I would recommend Plasti dipping, this solution lasts much longer

Cant hear u man

Could that music be any more annoying?

Too much like work.🙁

Get rid of music

The music.. Annoying.

am I the only dumbass who burned their plastics

I try thís product. Doesn’t last... just wasted money. Save ur money better guys.

Annoying music 🙈

Why do people wreck their how-to videos with stupid fkn music added to it?? At least keep the music off when you're talking and low during parts in between.

Sound sucks!!