This is EXACTLY what I’ve been looking for. Thanks for posting!

Ive used competing but similar products, first time was pretty rough, its really hard to get the finish consistent, imagine trying to get pancake batter really consistent by using a squeegee. Def work in small sections cause you only have a few min max. What I found works best to get a nice even/level/smooth application is apply it and squeege it on like he shows, and instead of broom finishing, i take a big tile grout sponge, lightly dampen it, and smooth over the entire surface. It will help knock down higher areas and you can blend it at the edges/joints so it looks nice. Have a 5 gallon bucket or two of water and every few passes rinse out the sponge and repeat. Recommend using knee pads while smoothing. If you have a driveway with spalling, rock pops, cracks, etc do good prep, power wash, fill the cracks and holes, then if you come over with a product like this, for a few hundred dollars you can have a new looking concrete driveway, saving up to tens of thousands over tearout and a new driveway pour. I sealed with foundation armour products, because they have ones you can tint, so a light grey makes it look like a fresh poured driveway. Also, if you have any voids, instead of mud or poly jacking, if the concrete hasnt yet sunk, they now make a diy version of basically like great stuff foam but very high psi rated, and you can drill holes into your driveway, and fill the voids. Much much cheaper than having a company do the mud jacking. I think a single kit will do up to 10 cubic feet for around $500, way better than the $2500 quotes I was getting.

Excellent tutorial on resurfacing concrete slabs! Clear instructions and practical tips make it easy to tackle this project and give your surfaces a fresh new look.

I can't wait until Spring comes so I can tune up the concrete apron on my garage. Great video!

Could you elaborate on the differences / applications for Flo-Coat vs Top-n-Bond ?

Where can i found this product,love you for showing, thank you

I plan on using this on my patio outside. Two quick questions: 1) Is there anything I could spray or apply on top to increase the durability? 2) I went to my big box store and they had half a pallet of flo coat. Everything bag was rock hard. Are those bags okay to use or should it be a sandy consistency?

I have tried many of these expensive coverings. Portland cement mixed with water and bonding agent works better for me, inexpensive too!

1:52 so which product is for leveling? top'n bond to fill my garage entrance dings and dent, need to resurface with this, but also need to fix the slanted garage concrete entrance.

A few questions, if this is being used in a garage where I would like to apply epoxy paint over it. Does it need to be finished with a broom? Also, will Surface need to be etched or sanded before applying the epoxy paint? Thanks

do you have to broom finish? is there anyway to have a smooth finish?

You can put the Flo-Coat over repairs made with Top-n-Bond ?

I’ve got a lot of oil spots in a 5 year old driveway. The oil spots are dry but you can clearly see them. Can this apply right over after power wash or do I need to grind out the oil spots?

Good morning, our driveway is showing that blue stone at the surface. Will this product work for me. Since it's a driveway about 80 feet long x 10 feet wide, should I get a pro for my project? Thanks

whats the longevity of this overlay? does it start to crack in couple years?

My city rebuilt the sidewalks in front of my house and the workers left curing chemical footprints that wont come out with a pressure wash. They said they will fix it by June 24, 2024. What are they gonna do to fix it do you think?

How do you finish the edges????

Remember when you need some resurfacing get in your vehicle and go go and get the Flo Flo

Will this help a bad concrete stamp job look better? Had a slab poured 3 months ago and they did a horrible stamp job.

Why do you use a pad for demo that looks great to begin with?

Does it dry white like concrete?

Previous owner of my house painted the driveway red and now it's fading , can this product be used on painted driveways?

Can I add color too it?

why not use Top N Bond ?

Can I reshape the broken edges too ?

Can you power wash this product.

OK. I just used this product on an 8 x 50 concrete patio. 1. Bag to bag, the variation in the consistency of the material was completely unpredictable. One bag would come out too wet, one perfect, one dry.... A total of 6 bags were used. The end result was really poor. Uneven, sharp spots, ridges, and ripples. I am going to have to grind just about the whole surface. 2. It is not self-leveling in any sense of the word. In fact, the slurry, whether I got it right or not, was setting up IN THE FIVE GALLON BUCKET within 1-2 minutes at most. Working a full bucket without adding water constantly was impossible. 3. The squeegee left lines of material on the far side of where I pulled from that set up instantly and will have to be grinded out. I watched the video here and other Sakrete installs, and had a helper, and we could not get the consistency right, FOLLOWING THE DIRECTIONS TO THE LETTER. An 8-hour long disaster of a job that will probably take an extra -free- 8 hours to make right.

is this product paintable

Καλησπέρα απο Ελλάδα. Εχω ενα πεζοδρόμιο το οποίο εχει ιδη τσιμεντο,εγω όμως θελω να προσθέσω και άλλο απο επάνω ωστε να ειναι στο ιδιο ύψος με το κρασπεδο. Τι πρέπει να κάνω; Στην Ελλάδα λένε μονο πλακακια. Εσείς τι λέτε;

Top N Bond is a better option money wise.

How much would this costs to have someone do ? Smart assets need not reply

Yeah but what's it look like when its dry sakrete videos never show that.

is this stampable

Great advice but you never talk in depth about the edges and how to finish them correctly!