Thank you, crazy skills you have. You make it look so easy, I'm sure it will take more than 15 minutes for me to staple it down and get the corners right!😂

Wow! Thank you so much! I reupholstered two old chairs today and my wife is over the moon!

Excellent video. In your case, master is the well deserved and earned title.

THE BEST VIDEO I'VE SEEN. And I've watched A TON of upholstery videos. So helpful and easy to understand! THANK YOU SO MUCH.

Great video. I really appreciated you giving the material information concerning replacement of the set padding. The detailed steps and explaination set this presentation apart from others

You have given me new hope! I have six old chairs to do and this was super helpfful!!!

THANKS!!!! Looked a long time for a good, simple corner demo!

Best video I have seen to date. Very Informative. Thank you Sir, You, Your work and teachings are definitely appreciated. Have a Blessed Day !

Thank you. I like how you break down all your instructions. I am a beginner and did not where to begin. I'm here stuck in my home during corona virus pandemic. Now is time to start this again.

Wow, the best video I have watched(and I have viewed many) on reupholstering a chair seat. The visuals, and audio are perfect. Your knowledge, and expertise attest to the fact that you are truly a Master Upholsterer! I'm redoing just one chair. But, I was really struggling with the corners on the chair seat. After watching this I realized it was about so much more than the corners. Now I feel confident in getting the job done. Thank you for taking the time to share your expert advice.

Thanks for the video! It really helped us figure out how to do the job without much hassle. The corners were really tough because our fabric was pretty thick. With practice and patience, the job is halfway done. I'll have the other 3 chairs done before dinner on Saturday! thanks again Barry!

Thank you you were very clear and concise with your instructions took time to go over every step I appreciate this can't wait to start !

Thank you I have just started upholstery , struggling with corners very helpful

Great video! Very detailed and helpful. Thank you for posting!

Superb illustration..apart from master upholsterer you also are an excellent teacher. Waiting for more videos from your side

Great job, easily explained too - Thank you from North Wales GB !

Brilliant video,makes it look simple!

Very informative! Thank you so much! Best video so far!

Wonderful. We have a very old chair which needs a new seat. I followed the instructions and în an hour my wife had a new cushion and she was very happy. And for a hubby’s DIY project that was the goal.

Thank you for sharing your expertise!

I like you care the details! Love it!

Just finished my first chair and it looks great! Thanks Barry!

Thank you! That was very informative and lots of good tips.

Very informative easy to understand I'm just barely getting into trying to reupholster some old furniture that's at my parents house I don't like throwing stuff away so I'm trying to surprise them your video helps out a lot thank you I don't have any of the tools you're using and I got a hand stapler going to try my best

Great video! Thank you. I splurged $40 for the arrow electric stapler. So glad I did....and I splurged $8 for an Irwin scratch awl. great tool.

Great explanation! Concise into the point. 👍

Great video. It helped me do a good job. Thank you.

Thanks Barry. Exactly what I was looking for =)

Thank you so much I found this so so helpful!

Great detailed yet simple instruction- I could not find any videos showing how to cut the foam correctly - thank you

Thank you! Very good, clear video!

Wonderful video. So helpful

Great info, sadly my chair is different. It has some kind of webbing that is damaged. I will work around it and tour video has given me the courage to open it and fix it. Thank you!

This was excellent! I did a really quick job on my chairs but knew it wasn't correct. I was rushed for time. While the wood is getting refinished, my plan is to re-do the correct way.

thanks for sharing your expertise with us ...

Landscape fabric as dust cover? Never thought about it and now it seems so obvious! Thanks!

Thanks! Wish I would have watched this before I started but now can finish a bit better!

Brilliant. Thanks very much.

Much thanks for this video ...you saved me alot of headache

"You're gonna be all happy about it." (loved it!)

There was no mention of how much profanity I would need while using a staple gun, but... you did warn me generally. I did a trial run with the old fabric and feel a lot more confident, but now I'm investing in some kind of pneumatic nail gun that doesn't require me sweating, grimacing, and cursing as if I were giving birth. Thanks for the great instruction!

Excellent. Instead of using a dust cover for frays I just folded my fabric for a smooth edge before stapling.

Great shop!

Thanks Barry!

Thank you great video!

Lovely, thankyou!

It's really helpful I'm watching from va richmond

Thanks for the video

Nice job thank you

Really great video!!! Thanks for sharing! BTW I noticed your small Canadian flag on your work table. Yeah!

Thank you!

My hubby and I covered our dining chair seats, only 2, without taking off the old stuff. We never did it before, and used an upholstery vinyl we bought at JoAnn’s. It probably would have gone much better to take it all off before putting on the new stuff, but we’ll know better next time. 🥴 That being said it looks pretty good! But we’ll do it right next time.

Thanks. Very useful.

Thank you for mentioning the center line, cutting out notches for center and for tailoring the corners. I do not like the fold I like your way much better. Thank you. :)

Thank you!!!!

Very good.

love it

Thank you

great video , would love a video on how much fabric needed hate math lol

Look real good

Great video. Our problem is removing the seat. There are no screws in the corner blocks or any where on the perimeter after we remove the dust cover There is webbing that appears to be glued to the top of the frame Our cushions are very good but the fabric is stained and we want to change it but removing the seat is puzzling and before I go further I wanted to inquire

Do you have a video on covering the curved back of a bar stool?

One inch overlap on each side with material is cutting it a little close for me. 😊

Good thorough video, but, this guy hasn't answered a single question posted here. I was going to ask what size/gauge staples he uses, but... I do appreciate the instruction about centering and alignment with the guide lines.

What differences when using 2 inch foam?

Pipings easy to make, cut fabric on the bias and sew on a sewing machine!

Great job. very formative,I like to know if you can give me a tip on stronger fabric what would be your tips on how to do the corner not sure if the same rules apply cause i had a hard time getting the shape you indicated, much appreciated

Question......I have seats just like yours and they are covered in leather, which is in great condition. I just want to change the color. I have bought a faux leather product. Can I upholster over the leather or should I remove it? I'm thinking it would be extra padding plus there are dozens and dozens of staples in the chairs now. Thank you!

What about if the plywood has the center cut out? I need stretchy webbing that goes under the foam. Do you know where I can get that?

very informative. thanks. what size staple did you use?

What depth foam do you usually use for a dining chair? Thanks so much!

Im guessing that foam is 2 inch? I just started some dining chairs from the 50s and I think I better replace this old cotton mat. Confused on foam width.

Thank you I appreciate your help. I guess there are some good Yankees LoL Your rival Red Sox God Bless Go Sox

I'd recommend leaving more than an inch of fabric. It's a lot easier if you have something to grab!

where do you buy your dense foam from? I was looking for 2.8 density and places like joann do not give you that information. I am getting ready to do 93 restaurant chairs. The big foam companies that do have those specs around me want 1500 dollar order? which do you recommend? thanks in advance

What is the best stapler

Can you make your own piping the same way you make a bias strip for pillows? Bias strips are not hard to do on a sewing machine.

just noticed slight tear on my kitchen chair i have no idea how it got there. any ideas?

Can you recommend a good electric staple gun pease?

Where can I find the wood panel part of the seat??

How thick is that foam?

Can I use all purpose glue instead?

How the foam is attached? Is it stapled right to the edge? I cannot see it being wrapped around the seat part. Any suggestions? In the video he completely omitted that part.

Excellent video but it's a shame the corner wasnt in close up the whole time you were doing it.

do you recommend a 1" HD foam for a dining chair? adding poly wrap over it?

can i use a staple gun

Why not use needle nose pliers to remove the staples vs a wire cutter?

Darn it. I was looking up videos for corner tips as I am that far but my foam, repuposed from other chair cushions doesn't have the poly batting, just a thin fabric layer. What is the negative from not having the poly batting around the foam?

Camera man zoomed out at the worst time. Really would have liked to see the corner of the chair up close while being finished.

Hello, I am a sofa upholsterer.

Why did you use wire cutter?

Dear cameraman, we don't care what kind of hat he's wearing. We care how to do the upholstery corners! :)

Sounds like a Virginia accent-- or maybe Canadian?

ehh.

Excellent video. I do quite a bit of work like this and found that CushionCraft upholstery foam and supplies work great for these types of projects.

Thank you!

Thank you!