How To Reupholster Your Door Inserts for Only $20! Completely Transforms Your Interior!

Рет қаралды 38,103

Nickjoenap

3 жыл бұрын

Пікірлер: 49

@thijsrooijakkers2153 3 жыл бұрын

That looks mint even with the small inperfections from the material

@Nickjoenap 3 жыл бұрын

Yeah even with the creases it’s better than stock which is what I was going for

@jaydenwhyte289 3 жыл бұрын

I’ve watched u for a bit now smart young lad u are haha imma prolly do this but with recaro fabric

@doctazee7545 3 жыл бұрын

If you have a vacuum bag you can use that to hold down the fabric tight to the piece over night until the glue sets. Prior to getting a nice vacuum bag set up I used the cheap space savers to good effect for putting veneer or fabric on oddly shaped components.

@Nickjoenap 3 жыл бұрын

Gabriel Zilnik that’s a good idea

@smsno1 2 жыл бұрын

love it. gonna give it a go!

@Harpell17 3 жыл бұрын

Been looking for a “how to” on removing those fabric pieces. Just picked up some today. Going to tackle this. Thanks a lot for the vid ! Going on my 15 FoST

@peterle8951 11 ай бұрын

Where do you guys get the fabric and how do you clean and remove the old glue??

@Harpell17 10 ай бұрын

@@peterle8951 I actually still haven’t done it, haha. Got my fabric from a local “fabric land”. What are you trying to remove the old glue from? If it’s the door card, I’d say a bit of heat, goo gone, and patients.

@c.j.8803 3 жыл бұрын

Bro this is AWESOME and black n red are my colors n theme in my car too THAX FOR SHARING ‼️👍

@MrHnnnnnnnngh 3 жыл бұрын

Sick!, on my to do list now.

@marcinmarszaek660 5 ай бұрын

Looks very good..

@mrlangdon2379 Жыл бұрын

I’m using this deep yellow velvet fabric

@blackdynamite_5470 2 жыл бұрын

I need to do this to my JZX100 door panels

@LukeM-ml7ld 2 жыл бұрын

Love it but what if you want to remove it in the future ? Would it ruin the underneath trying to rip it off? Is that part even easily replaceable

@aksellgallardo3604 Ай бұрын

Where did you get the shifter boot and the carbon fiber trim around the shifter

@miku0621 3 ай бұрын

My 91' accord has the classic american style carpets on its doors and ive wanted to get rid of them since the day i bought it.

@DriveWithAndy 2 жыл бұрын

Any idea why my alcantara on my door card inserts has come away and sagged? It was stuck down to the moulded panel for a week before it was installed. It was hot today I wonder if the heat has done something to make the fabric loose it's contact with the panel?

@jessefincham8899 Жыл бұрын

I suggest a air hammer air chisel thing to get the rivets off. So you don’t actually drill down into the plastic you need to screw it in.. maybe I’m just inpatient and special idk 😂

@escobih23 27 күн бұрын

hey brother do you know what the part number is for that part? can’t redo the upholstery cus like the frame or whatever is like broken… i think someone applied a lot of pressure to it and broke it

@echopiece79 Жыл бұрын

My oem panel has bubbles in it. Are you able to remove the existing fabric instead of going over the top of the existing?

@dixiechippers 2 жыл бұрын

Thanks, it's a door panel

@colebrewer7517 2 жыл бұрын

Hey man this looks really good. I was thinking about trying to tackle this and was wondering how have they held up over the past year?

@Nickjoenap 2 жыл бұрын

they still look the same and have stuck down fine

@colebrewer7517 2 жыл бұрын

@@Nickjoenap Awesome thanks! Think I'll be tackling this as my next project then!

@marcinmarszaek660 5 ай бұрын

Does this paint doesnt come off when you touch it with hand when it is hot ?

@kylerrhys8733 3 жыл бұрын

Instead of using screws is there a tool I can get to remove the rivets and then get new plastic rivets to put in?

@shanesouthwood8413 Жыл бұрын

Plastic welder with sticks of material. Just like soldering.

@jeremytorres3678 3 жыл бұрын

What side skirts do you run ?

@Nickjoenap 3 жыл бұрын

made them in this video kzfaq.info/get/bejne/mrVyg6l6s7qyo6s.html

@jessefincham8899 Жыл бұрын

I just did this. Red on a race red focus at. Vary vary hard to drill them out. And not take to much off where u can screw the wood screws in.. I had two screws barely pop threw. But the fabric looks great. I suggest a air chisel to get the rivets off. I just ordered one. Will probably get new door panels and redo it.

@shanesouthwood8413 Жыл бұрын

Why aren't you removing the old cloth?

@samsonyunited 3 жыл бұрын

is it possible to do the top part? the one that is the length of window

@Nickjoenap 3 жыл бұрын

samsonyunited I was thinking about doing that in black suede but I’m not completely sure how they come off. They might not need to though

@samsonyunited 3 жыл бұрын

@@Nickjoenap the fabric on mine ( rs mk3) detached and came out at the seam between top part and where your red starts. i just put glue and tried to pull and push it back in. end result is hard to tell but i got it just to line up at the edge. it is as if the fabric contacted and barely big enough to tuck it in again. i did not remove the panel

@zanderproper3000 2 жыл бұрын

What was the fabric called when looking on jo Ann’s website?

@Nickjoenap 2 жыл бұрын

i got it at their store but i think it’s microfiber suede

@zanderproper3000 2 жыл бұрын

@@Nickjoenap ok, thank you I appreciate it!

@NominalOrbit 2 жыл бұрын

Where do you get the cloth??

@Nickjoenap 2 жыл бұрын

I got it at jo ann’s fabric

@okietc1889 3 жыл бұрын

How would you wash them ? Any specific chemicals ?

@Nickjoenap 3 жыл бұрын

Okie TC not sure, it’s technically microfiber since it’s fake suede but if one got stained I’d probably just replace it since it was so cheap. The adhesive might come off with chemicals I guess I’ll have to test it

@doctazee7545 3 жыл бұрын

Castille soap and a boars hair brush. Super easy to care for. It will get nasty and grimy fast, but super easy to maintain and clean. I love alacantra and other synthetic suedes, but they are kinda high maintenance in touch areas.

@bobbydouglas16 2 жыл бұрын

What is your location lol I want to pay you for this

@Foxcraze 3 жыл бұрын

Subbed, that looks great! I wanna do something like this with my door panels sometime!! I have a channel as well but it’s heavy auto body diy and stuff dealing with my Infiniti Q50. Check it out and let me know what you think!!

@Nickjoenap 3 жыл бұрын

Thanks! The Q50 looks clean man!

@Foxcraze 3 жыл бұрын

Nickjoenap appreciate it! Gotta support my fellow youtubers!