Part 2 video is out now: kzfaq.info/get/bejne/gMqEhrGg18qbkqM.html

Quite literally said "Aww!" out loud to the shout-out, thank you so much! A very worth return to form and awesome console mod to celebrate 300K!

this dude is the true definition of a man dedicated to his work 👏👏👏

Finally got my first RGH 3 booting perfectly!! Thanks for getting me into the hobby of soldering I never knew I would have so much fun learning how to work on a circuit board!

I had never done anything like this before, but with the help of your video I was able to get my console RGH'ed, it boots instantly and works flawlessly, I was honestly so surprised I managed to do it. Excellent video thank you!

Man does this take me back! You definitely deserve all the love mate, taught me a lot of stuff.

doing this tomorrow, just picked up 2 jaspers and 2 falcons cheap, cant wait, thanks alot for this video i used to watch your jtag tutorials back in the day, going to watch your updated ones when im setting up my new rgh3 consoles :)

This dude is the first man that shows you step by step every bit

Congratulations on the 300k, well deserved! You've taught us so much and fir that I thank you

Finally modded my Falcon Xbox and this tutorial was a life saver. Between this and the Xbox Modding discord, it's been an amazing journey, thank you!

8:05 while this method to open the console does work, I would still recommend unclipping them with a removal tool. not only does it feel like you are breaking it, if you do it too fast, you WILL break the tabs off, which means you won’t be able to put the case back on.

I have a Jasper white Xbox 360 and always wanted to mod it. Thank for this awsome video. It gave me the courage to do it because of the great details and explaining.

Several days ago I've modded one fat and one slim xbox 360 with this method. I hope I will get some new valuable tricks from this video. keep up the great work. :)

Just did this on a 360 a friend gave me, a bit hard not gonna lie, but in the end i made it. Thanks a lot for the insane tuto in depth. Love

Thanks for this guide. I just successfully RGH'd a Falcon. A word of caution for first timers - pay close attention to the RGH wiring. My console wouldn't boot properly after I did the RGH wiring. A quick tweak of the wiring layout and it boots fine now.

A 360 video ! That made me smile . You are finally back making those . Love you bro

Always been a GOAT at modding tutorials 👌 Pretty crazy how its done tbf the creators of the chips and programs are insane

my guy I'm so glad to see you and Mr.Mario posting these videos if it wasn't for MrMario i wouldn't have my rgh and if it wasn't for you i wouldn't have been able to set up my console so thank you guys very much (slim consoles only usually only have 27mhz dont worry its normal for anyone questioning why)

Thank you very much for this tutorial! This new method is WAY more accessible than the older ones for beginners like me. I also followed MrMario2011's tutorial for the Trinity, then you mentioned his tutorial and it all came full circle :)

That exact fan your useing fryed one of my first Xboxes I have ever built

Still not a simple task with the 360's ey. Great guide, you are indeed on top of everything mate😊 Well done 👍 Will be waiting for your guide modding a 360 slim😁

Second attempt successful, the first one I killed.during the process. You go through it all very fast ! Thanks for the help, it really helped. Ps: from the first attempt to second attempt the biggest change was that I bought a Weller soldering station. The first attempt was with a cheap Ali Express piece of crap. Thanks Weller.

Hey! I just finshed my first RGH3 on my 512MB Jasper. Your guide was super helpful. I took to 2 tries to get the wiring right, but now it instaboots and is super stable. So much thanks for your great guide!

Thanks for the guide man, today was my first time doing an RGH. I struggled a bit with getting the wire connected to PLL but other than that, was a great process and fun! And to top it off, i got instant boot times! I also changed out the LED's on the RF board to blue. :) Thanks again man

I love this channel. The only man I trust for custom systems

I am planning on getting a Jasper HDMI model 360 very soon, so I will be following this tutorial once I get everything I need to RGH it!

Great Vid.👍👍👍 I Just strongly do not recommend the "opening like a suitcase" part at 08:08. Be patient, take your time to open it, otherwise you are very likely to break it.

Thank you for this tutorial, time and effort, congrats on 300K

Hi, Fyi you should point it at releases/latest , that way you won't be linking only 3.1.4 Also, run as administrator is no longer required. I have also fixed the high DPI displays bug, the fixed version will be released shortly to auto-update

Congratulations on 300k mark! You deserve way more

I tried the rgh 3.0 hack after creating and writing xell to the nand it killed both my xboxes I've been left with 2 dead xboxes thanks to you and Mario you didn't say after writing xell to nand it needed to be unplugged you didn't mention that so you and him have left me with no xbox at all you haven't covered the hack properly due to col I can't get another THANK YOU VERY MUCH

congrats for 300k and thanks for the video

Great video....did a lot of these back in the day. Wish there was instruction like this back then

Very clear y concise and nice images. Extremely well done! Thanks.

Used this to succesfully RGH my xbox, thank you man! :)

Ohh man you remind me of the good old times!! Trinitys and coronas were pain in the ass using rgh 2.0 playing with the cable lengths using the glitcher.. 🤣🤣

Easy! Thank you for everything throughout the years

best explanation ever. even though english is not my mother language. thx a lot

OMG OMG that a beautiful x360, mine jasper arcade on RGH and still running. nice vid bro

I have my xbox falcon for about 12 years i never have no problem whit my jtag becouse i see your tutorial , im thinkng to another xbox slim Rgh the processo you have done to you tutorial thanks for you tutorial you rock Yoooo

ps4 9.3 or 9.5 jailbreak u should show us the legendary face behind this legendary chanel

OOH I LOVE WHEN YOU UPLOAD

I'm still using a flashed xbox 360 online in 2022 lol

what a great video, followed your instructions, and wow, i got my xbox rgh, one thing though, for some reason the Xex Menu v1.2 did not work for me, i made sure of creating the folders, formating the usb, but no, i ended up using Xex Menu v1.1 (live) , and that one did work. thanks a lot for the video !

picked up a Falcon Xbox 360 recently because of this video, i will follow this video guide and update this comment soon edit 1: just dissasembled my 360. it looked pristine. im still waiting on the parts to arrive tonight edit 2: screwed up. my bad soldering iron caused me to rip one of the pads off during the nand soldering process

its just flashing the green light with no screen, what should i do?

Thank you, man, your guide is a worker.

Rgh xbox 360 does anyone actually still want one nowadays 🤔, still awesome stuff from all your videos. Thanks

at the moment my xbox wont boot after i install the RGH 3.0. The green led blinks but after few second the xbox went off :c

dang this bring memories im still using your tutorial for jtag

For me, flash nand part was ok. But after, with more soldering, i think it is possible for amateur, but with lots of struggle. :D great job. Very interesting.

Great tutorial! You inspired me to learn how to solder. For the Pico, can I just solder on any 30 gauge wire to each of the corresponding points? Or do I need to buy a nand reader cable?

Wow! Looks easy! Will definitely try this out when I order my pico :)

great video, (accidentally tore one of the pads off but with a bit of fixing it was no problem) i now have a modded xbox

you solder worse than jan beta - but better than louis rossmann. all you 3 are legends for me. keep up the good work - you nerds ROCK!

this is so awesome i never got around to modding a xbox it might be cool to try a new hobby

Well done. A wee bit complicated for me to do soldering etc. But fascinating to watch. If only it was easier like the ps4 jailbreak.

Keep up the great work.

Quality video, thanks 👍 What soldering iron you using?

Brilliant video! just a quick question....does pico flash work with J-runner with extras ? thanks

Hi ! You dont show anywhere what you do with the diode and the resistor : where they connect, and what is the polarity to use when soldering the diode ?

I recently decided to mod my xbox 360 after seing this video. After I had put the resistor and the diod on the back I went to turn the console on to get the cpu key. I put everything on that was needed and when I pressed the start button everything was going fine until it flashed 3 red lights at me. Is the console completly destroyed or can it still be salvaged.

will this be the only way to ever mod the xbox 360

Excellent video. Only one question: Is the resistor needed 1/4 Wats?

Been following you for a while You helped me a lot with your PS4 tutorials Is PS4 newer firmware (9.50 or 60) than 9.00 jailbreak released??

Great video. Thank you for this tutorial.😁😁😁

i have this problem: i dumped my nand and tried booting in xell. my xbox wouldnt boot so i reflashed my nand backup and it still didnt boot. so i unsoldered the wires for xell and it booted normally. now i try to detect my xbox to boot xell again and it says "no console found". i resoldered my wires they are clean. and it still says no console found. i even resoldered the wires for xell but still nothing. why isnt it working anymore?

Is their a alternative point for the smc_post1 cuz mine fell off

Finally some Xbox 360 content 😁

Congrats Lee!

How do you fix a RGH not booting up like no picture when you turn it on do you know the cause of it ? Please

29:54 You can also use google lens on your phone to copy the text.

Another awesome vid tutorial! Got a jasper ready to go. That i replaced broken hdmi socket on. Just wondering... i guess its best to be on the latest xbox 360 os update before performing this? After rgh i guess you can put a bigger hdd than 500gb?

Could you attache link for the wire please need some good wire from the UK

Have a Falcon, will try this💪

For old modders re-flash the nand because the timing files are updated now

Btw, there is a guy named 'Mario' Who completely sucks at teaching, he tells a 5 minutes story in like 50 minutes, Coming here from his class makes me appreciate this even more.

thank you man. I couldn't believe but I did it🤣

Mw2 memories ❤️

Love your videos! Watched all of them through the years! Can i just send you my xbox and you can mod it for me xD i dont have a soldering iron and not confident i can do it!

What AWG is the wire????

Can you make a video on how to resolve N-32046-5 Error. I can't for the life of it understand what it written on Google its so technical.

Amazing tutorial thank you

If someone's falcon doesn't want to boot after installing xell, let them install a 10k resistor... mine didn't want to boot with a 22k resistor and with 10k it was insta boot.

Thanks for the tutorial, just want to know how reliable this method is compared to 2.1

Been wondering how to do this since 2009 seems way past what I want to invest my time in but I've always wanted to learn how to solder though 🔥

Idk if this is the right place to ask this, but is there any other place in the motherboard i can connect the ground wire (yellow wire in the pico diagram at 11:49)? Because that pin just doesnt wanna stick to the solder, all others worked no problem. pls

FUCK MAN I WISH THIS COULD HAVE BEEN DISCOVERED IN 2010.

what kind of dioed is needed? thank you great video very detailed haven't done this before but going to try soon.

I think you need to connect the drive every time you turn it on. I have open tray error now…

Great video 👍 I’m having a little issue. Installed j runner w extras and installed the drivers for the xflasher as well but when I open jrunner while having xflasher plugged in and set to spi mode it doesn’t show up in jrunner.

Thanks! One more console modded ❤

good vid! I don't understand why all the RGH vids don't use 'Scan IP' in JRunner when obtaining the CPU key, does no one not know what it does? 🤣💀🤣💀🤣💀

hi modded thanks for the video, I would like to know what is the W of the resistor you used. thanks for your answer

thanks for your help about the usb problem i was having! i've run into another one... 😅 if xflasher doesn't show up in jrunner, after i've soldered the wires to the motherboard spots, does that mean my soldering isn't good enough? could i have possibly burnt a solder pad beyond use? i ask because i've tried attaching them a few times. and i've completely cleaned up burnt flux and tried soldering again, but xflasher still won't show up in jrunner. and yes i've installed the drivers, just like you did in the video. i have other boxes to try out in case this is broken (i was anticipating the first try not going smooth) but i want to make sure this one isn't salvageable before i rip open a new one.

Its important to disconnect the reader before turning the console on.

I really like this video. But is the diode 100% necessary?

the new Rgh 3 the easyest installation no need to solder, when you see tutorial there is cleary needed solder, is funny how people announce that.

Hey man I would really appreciate a video on how to make a ps4 homebrew app because there isn’t enough info or even not at all

I can’t find the clear fan duct anywhere. Every site I look for them shows that they’re out of stock as of 12/9/22. Same goes for the clear-colored ones as well