No video
How to safety wire a car or motorcycle caliper, engine & rotor bolts. HD
Рет қаралды 26,126
Күн бұрынThis is just a simple how to video of safety wiring your motorcycle rotorbolts. After some practice with good technics you can make your work look like a pro. I used to do this a lot on jet engines so its pretty easy now.
This was filmed using a GoPro Hero 3+ Black edition in 1080 HD @48fps in narrow view.
@SergioPena20 5 жыл бұрын
It’s a little bit different in avaiation. The pliers with wavy teeth easier on the wire because they don’t cause little nicks when clamping on the wire. When you twist them by hand, you want the twist to be at about a 120 degree angle.
@SterlingRobertson 5 жыл бұрын
Yeah, I know but it's just a lil how to video for those that don't know.
@SergioPena20 5 жыл бұрын
I understand completely. I don’t know if I came across as a dick. That wasn’t my intention. I just figured I would throw a couple more points out there in case someone that’s never done it before was looking for a couple more pointers. I liked the video. You did a good job on it.
@markosparko7873 8 жыл бұрын
I think your tumble dryer needs lock wired.
@dsc194 Жыл бұрын
Thanks for the video. Do you know if the header bolts need to be wired to race WERA?
@MSMSal 7 жыл бұрын
Thanks, I needed this
@thesickening0169 7 жыл бұрын
Awesome info here man. Good technique as well. Now did you drill the bolts with them still in the rotor and wheel?
@jamesregan7 8 жыл бұрын
great video.
@chrissilva661 6 жыл бұрын
Great video! How about doing a video on how to drill the bolts?
@darikrome285 6 жыл бұрын
Does this ruin the integrity of the bolt screws? They might not be able to back out, but what about hairline fractures from drillings that could potentially shatter the bolts and such?
@SterlingRobertson 6 жыл бұрын
Darik Rome No. It doesn't cause any issues. It's a very small hole that only goes through the head of the bolt.
@ftrikerfox 8 жыл бұрын
so can you do 2 at a time or does it have to be 6 great video by the way
@SterlingRobertson 8 жыл бұрын
Either way can work just fine.
@diablo3871 6 жыл бұрын
Where do you get drilled rotor bolts from? Or did you drill them yourself. I cant find then anywhere
@SterlingRobertson 6 жыл бұрын
luck_runs_out I drilled them myself.
@Spachia 5 жыл бұрын
But you can buy them on aircraftspruce.com. They are MS or AN standard spec
@marsarmyrc 5 жыл бұрын
You can buy tools that line bolts up with guide holes so you can drill them yourself, I don’t think they cost that much
@planedr 8 жыл бұрын
Where are your reversible pliers?
@ShaneArnoldAF 3 жыл бұрын
Avionic Safety Wire PLyers/ amazon $20
@1sumquodsum 3 жыл бұрын
Forget it
@wildcat9276 7 жыл бұрын
safety cable would have taken 1 minute to install all of those fasteners
@Spachia 5 жыл бұрын
Nader Haq that shit ain’t cheap though
Sportbike Track Gear
Рет қаралды 40 М.
The Aviation Maintenance Channel
Рет қаралды 84 М.